- Add mainline device tree for YY3588 board
- Enable all peripherals: USB 3.0, Ethernet, PCIe, HDMI
- Add RK8602 PMIC regulators for CPU/NPU power
- Enable I2C buses for PMIC and RTC
- Fix pinctrl conflicts (I2C1 M2, disable SFC for UART7)
- Configure USB-C and USB 3.0 host ports
- Add HDMI0 output with HDPTX PHY
- Enable thermal management with PWM fan
- Add SD card and eMMC storage support
- Configure all UARTs, I2S audio, and SPI buses
- ES8323 audio codec currently disabled for further debugging
- no need for vendor u-boot, as mainline can boot vendor kernel fine
- update comments with hardware pin references
- mainline boot order: NVMe -> USB -> eMMC
- boot order: NVMe -> MMC
- GMAC works
- nvme works
- `ums` et al working
- usb3 ports (on carrier board) work
- DT is copy (not symlink) from kernel DT due to NPU nodes
- vendor:
- kernel: armbian/linux-rockchip already had a DTS from jriek
- u-boot: taken from jriek (reorg'ed the defconfig)
- edge:
- kernel: taken from jriek's 6.11 wip branch
- u-boot: generic (can only boot SD/eMMC)
Switch to NO_HZ_IDLE for energy saving. Also enable Menu cpuidle
governor for tickless systems.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Igor Pecovnik <igor@armbian.com>
> merry everything and a happy always
- mainline:
- enable "edge" branch, with custom DT
- works: almost everything
- does NOT work:
- USB-C port is only for OTG/UMS (NOT USB3-host) - didn't describe fusb302 et al in DT
- any of the 3x HDMI -> MIPI (or whatever) HDMI-In's (thus this is a 1x1, not 4x1)
- front USB3 blue ports are actually USB2 (also in vendor kernel)
- front USB2 black ports don't work (but are powered)
- Analog audio - didn't describe, could be, but I've no way to test
- use mainline u-boot v2026.01-rc5 (with custom DT/defconfig/etc) with mainline ATF
- boot order: SD -> NVMe -> USB -> eMMC -> ETH
- adapt usage of shared "mekotronics" vendor include only for vendor/legacy
- also fix DTB: `rockchip/rk3588-blueberry-r58-4x4.dtb` for vendor
- same across vendor and mainline
- mainline u-boot kinda-boots vendor kernel, but TF-A mismatch ref HDMI-rx
- so use vendor u-boot and rk blob for vendor branch/kernel
- straight-ish from vendor (which is a complete mess)
- front:
- blue ports work (in usb2.0 mode, which also happens in vendor kernel)
- black ports do NOT work (but are powered...?)
- back:
- white ports work in usb 2.0 mode (as expected, also in vendor kernel)
- those ports have too-long wires (flat cable) and reset all the time
- in summary: blue "USB3" ports at the front work in USB2.0 mode
- rest doesn't
- also enable CONFIG_ROCKCHIP_MASKROM_IMAGE for quick development
- fix conflicting vendor hook
- only hack the vendor u-boot down to next-dev-v2024.03 for vendor/legacy
* fix(rootfs): pass GIT_FIXED_WORKDIR inline to fetch_from_repo
Instead of using 'export GIT_FIXED_WORKDIR' and then 'unset' after,
pass the variable inline to the fetch_from_repo call. This ensures
the variable only exists in the context of that specific command
and doesn't leak into subsequent calls.
This follows the same pattern used in uboot-git.sh and kernel-git.sh.
---------
Co-authored-by: Viacheslav Bocharov <adeep@lexina.in>
- Remove redundant daily cron schedule (already runs on push to main)
- Add concurrency control to cancel old runs
- Improve formatting and add clarifying comments
- Add push trigger for main branch
- Restructure README for better scannability and information hierarchy
- Add prominent Armbian Imager recommendation at the top
- Improve Build Host Requirements organization (Hardware/OS/Software)
- Simplify and clarify language throughout
- Better resource link descriptions
- Remove redundant "Download Prebuilt Images" section
The README now better guides users to Armbian Imager while still
providing clear information for those building from source.
Update all copyright notices in shell scripts from 2025 to 2026.
## Changes
- **Igor Pecovnik**: 2013-2025 → 2013-2026 (129 files)
- **Ricardo Pardini**: 2023-2025 → 2023-2026, 2020-2025 → 2020-2026 (5 files)
## Additional Improvements
Also updated the backtitle in `lib/functions/configuration/interactive.sh`:
- Changed title from "Armbian building script" to "Armbian Linux build framework"
- Removed docs link for cleaner display
- Uses dynamic year calculation with separate declaration (fixes shellcheck SC2155)
