EvilOlaf
5580066a4a
meson64-6.19: use llm suggestion for overlay README
2025-12-29 12:50:02 +01:00
EvilOlaf
671270edd9
meson64-6.19: rewrite patches against 6.19-rc2
2025-12-29 12:50:02 +01:00
EvilOlaf
7161c9cbb1
meson64-6.19: rework patches for 6.19-rc1
...
- fix jethome
- fix socinfo patch, re-enable another
- seems like no longer needed, upstream code has changed
- disable more breaking patches. Buildable state
- remove upstreamed patch
- adjust patching_config kernel versions
2025-12-29 12:50:02 +01:00
EvilOlaf
8e81ee08d5
meson64-6.19: copy 6.18 patches into 6.19
2025-12-29 12:50:02 +01:00
Ricardo Pardini
1a63a5a22c
Revert "meson64: bump edge to 6.19; current 6.12 -> 6.18 ( #9069 )" (wrong squash)
...
This reverts commit f1b5acc9a1 .
2025-12-29 12:50:02 +01:00
Werner
f1b5acc9a1
meson64: bump edge to 6.19; current 6.12 -> 6.18 ( #9069 )
...
* meson64-6.19: copy 6.18 patches into 6.19
* meson64_common: meson64 bump edge to 6.19
* meson64-6.19: rework patches for 6.19-rc1
- fix jethome
- fix socinfo patch, re-enable another
- seems like no longer needed, upstream code has changed
- disable more breaking patches. Buildable state
- remove upstreamed patch
- adjust patching_config kernel versions
* mainline-kernel: bump 6.19 to 6.19-rc2
* meson64-6.19: rewrite patches against 6.19-rc2
* meson64-6.19: use llm suggestion for overlay README
* mainline-kernel: bump 6.19 to 6.19-rc3
* meson64-6.19: pick dwc-MPS-slowness-fix patch that missed the bus from 6.18
* meson64-6.19: rewrite against 6.19-rc3
* meson64_common: bump `current` 6.12 -> 6.18
* meson64-6.18: rewrite against 6.18.2
---------
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
2025-12-29 12:30:26 +01:00
SuperKali
50d6519612
rockchip64: add edge kernel support for Youyeetoo YY3588 ( #9137 )
...
- Add mainline device tree for YY3588 board
- Enable all peripherals: USB 3.0, Ethernet, PCIe, HDMI
- Add RK8602 PMIC regulators for CPU/NPU power
- Enable I2C buses for PMIC and RTC
- Fix pinctrl conflicts (I2C1 M2, disable SFC for UART7)
- Configure USB-C and USB 3.0 host ports
- Add HDMI0 output with HDPTX PHY
- Enable thermal management with PWM fan
- Add SD card and eMMC storage support
- Configure all UARTs, I2S audio, and SPI buses
- ES8323 audio codec currently disabled for further debugging
2025-12-29 12:18:56 +01:00
Ricardo Pardini
32eaeb6193
mixtile-core3588e: drop vendor u-boot (mainline works great)
...
- no need for vendor u-boot, as mainline can boot vendor kernel fine
- update comments with hardware pin references
- mainline boot order: NVMe -> USB -> eMMC
2025-12-29 09:29:20 +01:00
Ricardo Pardini
b8344d2bea
mixtile-core3588e: edge: u-boot defconfig/dt with working nvme/gmac/usb
...
- boot order: NVMe -> MMC
- GMAC works
- nvme works
- `ums` et al working
- usb3 ports (on carrier board) work
- DT is copy (not symlink) from kernel DT due to NPU nodes
2025-12-29 09:29:20 +01:00
Ricardo Pardini
77aa36d799
rockchip64-6.18: mixtile-core3588e: device tree additions & fixes
...
- on top of Joshua Riek's DT, add:
- GPU
- NPU
- i2c5 (40-pin)
- saradc
- tsadc (thermals)
- pwm2 / tacho / cooling fan
- sys-led
- usb2 otg (for flashing / UMS - microusb port)
- USB3 ports (via usb hub on carrier board)
- hdmi0 & hdmi0 audio & vop
- uart1 (40-pin)
2025-12-29 09:29:20 +01:00
Ricardo Pardini
42a0055940
mixtile-core3588e: add board with vendor and edge branches (Joshua Riek + fixes)
...
- vendor:
- kernel: armbian/linux-rockchip already had a DTS from jriek
- u-boot: taken from jriek (reorg'ed the defconfig)
- edge:
- kernel: taken from jriek's 6.11 wip branch
- u-boot: generic (can only boot SD/eMMC)
2025-12-29 09:29:20 +01:00
Igor Pecovnik
4d4390541e
Making Rabbbit happy - drop .orig garbage from the patches
2025-12-29 09:25:58 +01:00
EvilOlaf
aa2e963721
add allwinner: a523: Support SPI controllers patch series
...
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20251221110513.1850535-1-wens@kernel.org/
2025-12-29 09:25:58 +01:00
Ricardo Pardini
2c881a87a0
rockchip64-6.18: Enable HDMI1 and audio for HDMI0/1 on CM3588-NAS
2025-12-29 09:16:04 +01:00
Patrick Yavitz
09f7b36373
SpacemiT: Fixup eMMC boot on the MusePi Pro "SPINOR"
...
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-12-28 17:05:50 -05:00
Ricardo Pardini
27d283ced9
mekotronics-r58-4x4: add v2026.01 mainline u-boot
...
- DT is a copy from kernel, minus the NPU nodes (which u-boot doesn't know about yet)
2025-12-28 12:38:02 +01:00
Ricardo Pardini
47b982f678
mekotronics-r58-4x4: fix vendor u-boot
...
- add missing symlink to u-boot patches, same as other meko boards
2025-12-28 12:38:02 +01:00
Ricardo Pardini
dce9abba2e
rockchip64-6.18: mekotronics-r58-4x4: rtl8125/8169 describe in DT for stable MAC
...
- this will later be patched by an u-boot board file fdt_init() with ethaddr
- for now just hardcoded
2025-12-28 12:38:02 +01:00
Ricardo Pardini
d176957476
rockchip64-6.18: mekotronics-r58-4x4: usb 2.0 type-A ports & regulator/pinctrl
...
- straight-ish from vendor (which is a complete mess)
- front:
- blue ports work (in usb2.0 mode, which also happens in vendor kernel)
- black ports do NOT work (but are powered...?)
- back:
- white ports work in usb 2.0 mode (as expected, also in vendor kernel)
- those ports have too-long wires (flat cable) and reset all the time
- in summary: blue "USB3" ports at the front work in USB2.0 mode
- rest doesn't
2025-12-28 12:38:02 +01:00
Ricardo Pardini
941dc725bc
rockchip64-6.18: mekotronics-r58-4x4: uart6 and bluetooth part of BCM43752
...
- all credit to armsom sige7 DT, otherwise I'd be lost forever
2025-12-28 12:38:02 +01:00
Ricardo Pardini
e49880669b
rockchip64-6.18: mekotronics-r58-4x4: uart1 (green connector on back of board)
2025-12-28 12:38:02 +01:00
Ricardo Pardini
3c9243b5d0
rockchip64-6.18: mekotronics-r58-4x4: wifi on pcie2x1l0 with clock and wifi_host_wake_irq
2025-12-28 12:38:02 +01:00
Ricardo Pardini
9164cc93ca
rockchip64-6.18: mekotronics-r58-4x4: rtc
2025-12-28 12:38:02 +01:00
Ricardo Pardini
fa672fbfcb
rockchip64-6.18: mekotronics-r58-4x4: hdmi-in (hdmirx)
...
- the 4x4 has 4 HDMI-In's, only one of them (labeled "HDMI IN60") is 3588-native
2025-12-28 12:38:02 +01:00
Ricardo Pardini
7e531c09e3
rockchip64-6.18: mekotronics-r58-4x4: hdmi audio (out)
2025-12-28 12:38:02 +01:00
Ricardo Pardini
24a9e994bd
rockchip64-6.18: mekotronics-r58-4x4: "power" led & pinctrl
2025-12-28 12:38:02 +01:00
Ricardo Pardini
8aa448f8f8
rockchip64-6.18: mekotronics-r58-4x4: i2c2 regulator and NPU
2025-12-28 12:38:02 +01:00
Ricardo Pardini
94fa014ac1
rockchip64-6.18: mekotronics-r58-4x4: hdmi, vop, gpu, saradc, tsadc
...
- all work fine
2025-12-28 12:38:02 +01:00
Ricardo Pardini
b0da2145ad
rockchip64-6.18: mekotronics-r58-4x4: pcie2x1l0 (wifi) and pcie2x1l1 (rtl8169)
...
- wifi doesn't come up; guess I'll have to add bus-range later
- rtl8169 works
2025-12-28 12:38:02 +01:00
Ricardo Pardini
dfcc8cd7b6
rockchip64-6.18: mekotronics-r58-4x4: pcie3x4 (NVMe)
2025-12-28 12:38:02 +01:00
Ricardo Pardini
2a54f483e9
rockchip64-6.18: mekotronics-r58-4x4: simple u2phy0(_otg) and usb_host0_xhci for UMS
2025-12-28 12:38:02 +01:00
Ricardo Pardini
3c073a94e0
rockchip64-6.18: mekotronics-r58-4x4: big voltage for big cores
2025-12-28 12:38:02 +01:00
Ricardo Pardini
166c1a3d08
rockchip64-6.18: mekotronics-r58-4x4: eMMC & SD fixes +regulator
2025-12-28 12:38:02 +01:00
Ricardo Pardini
312bfd4905
rockchip64-6.18: mekotronics-r58-4x4: adapt rk806 according to vendor
...
- a translation of the vendor "&rk806single" and its "pmic-power-off" with rk806_dvs1_slp
2025-12-28 12:38:02 +01:00
Ricardo Pardini
9b03d788d7
rockchip64-6.18: mekotronics-r58-4x4: basic DT with SD/eMMC/UART/rk806
...
- very basic, started from a mainlined DT, stripped almost everything
- only SD/eMMC/debug UART and basic regulators
2025-12-28 12:38:02 +01:00
Werner
8fb61c91d7
dts: orangepi-4-lts: fix mispelled disable properites ( #9123 )
2025-12-25 12:44:57 +01:00
EvilOlaf
430d9ab41b
Port patches from PR #8831
2025-12-22 21:22:51 +01:00
EvilOlaf
145fd0b799
fix indentations
2025-12-22 21:22:51 +01:00
EvilOlaf
6520578103
sunxi: backport allwinner a523/t527 patches from 6.19
2025-12-22 21:22:51 +01:00
Fabian Wolter
3aacc125a6
rockchip64: Fix IEP driver
2025-12-21 13:42:12 +01:00
Igor Pecovnik
3d66969166
Bump rockchip edge to 6.18.y
2025-12-19 20:53:57 +01:00
brentr
7a84087f74
DevTree overlays to enable RK3308 UARTS ( #9072 )
...
* rk3308 dts overlays to enable its built-in uarts
* Add rk3308 uart enabling device tree overlays
2025-12-19 16:30:25 +01:00
Ricardo Pardini
4be2185a50
rockchip64-6.18: radxa-e24c: map LEDs to RTL DSA switch ports
2025-12-19 16:16:17 +01:00
Ricardo Pardini
cc58129bc6
rockchip64-6.18: add DeviceTree for radxa-e24c (picked from Kwiboo)
...
- works: PCIe/NVMe, GMAC, Realtek DSA switch, SD, SPI-NOR
- does not work: USB (I didn't manage to pick correctly; lets wait for Kwiboo on this)
- untested: everything else
2025-12-19 16:16:17 +01:00
Ricardo Pardini
a28680603d
rockchip64-6.18: rk3528: PCIe & SFC enablement; RTL DSA fixes
...
- rk3528 PCIe patch from 6.19
- rest is all Kwiboo
- I didn't pick GRF/USB/thermal stuff as I couldn't make it work
2025-12-19 16:16:17 +01:00
Ricardo Pardini
d3683b7230
radxa-e24c: u-boot: edge: disable gmac1 as the dsa switch won't work anyway
...
- the gmac works, but is connected to switch chip that is not supported by u-boot
- here I disable gmac1 for the u-boot DT
- that allows for easier booting from USB ethernet adapters
2025-12-19 16:16:17 +01:00
Ricardo Pardini
b2086d997f
radxa-e24c: u-boot: edge: add USB NET drivers to defconfig
...
- so we can boot from USB network in u-boot
2025-12-19 16:16:17 +01:00
Ricardo Pardini
ea57d65665
radxa-e24c: u-boot: edge: mainline u-boot, picked from Kwiboo's WIP branch
...
- I couldn't wait
- Using a few commits _after_ v2026.01-rc4
2025-12-19 16:16:17 +01:00
EvilOlaf
010fd7a898
sunxi: bump current and edge to latest minor, rewrite patches
2025-12-19 16:15:50 +01:00
Werner
95535bb6dc
rpi4b: bump legacy, current and edge to new major versions ( #9097 )
2025-12-19 15:08:26 +01:00