* Bump imx6 edge to 5.12.y
* Bump odroid xu4 edge to 5.12.y
* Bump Jetson nano edge to 5.12.y
* WIP: Bump sunxi to 5.12.y
- create a copy of patches and make a new link
- wireless patches needs adjutement to 5.12
- some patches are still failing
* Adjust wireless patches to build on 5.12.y
* Remove template wireless patch
* Move Espressobin edge to 5.12.y
* Bump mvebu to 5.12
- patch 92-mvebu-gpio-remove-hardcoded-timer-assignment.patch was disabled @heisath
- adjusted wireless driver for 8723ds
* Adjust sunxi / sunxi64 edge to compile
* Fix kernel config for Jetson nano edge
* bump meson64 to 5.12.y
* bump rockchip edge to 5.12.y
* Bump rockchip64 to 5.12.y
* Bump rk322x edge to 5.12.y
@paolosabatino
* Cleanup im6, re-add 5.10.y patches since one is missing in 5.12.y
* Update odroidxu4 edge links
* rk322x: moved rk322x-edge to kernel 5.12, fix overlay compilation, retouched included kernel modules
* Cleanup: remove deprecated config
Co-authored-by: Paolo Sabatino <paolo.sabatino@gmail.com>
* Remove unnecessary patch
- this patch works when compiling and installing manually.
- the dtb with the changes is taken from the kernel and not from u-boot, therefore this patch does not work.
* Add enable-sound-pinecube-kernel.patch
- Add patch to enable audio codec in pinecube with v3s compatible
- Built and tested on Armbian Buster with Kernel 5.11.x (edge)
A long story short:
- patch 'meson64_add_shutdown_function_to_meson_drv.patch' (adds meson_drv_shutdown) added on 04/03/2021
- same patch renamed to '.patch_disabled' on 07/03/2021, since it broke what it was supposed to fix
- kernel 5.10.24 upstream merged similar version of patch, which indeed fixed some khadas stuff, but broke odroid, at least HC4
- now I add this patch to revert upstream.
- also remove the .patch_disabled to avoid confusion
- to say the truth, the HC4 is not reboot-proof, it still hangs sometimes. so this is not the end of it.
- ps: without this revert, HC4 hangs 100% of the time.
- ps2: did not test on edge 5.11 yet, but it looks like the same
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
There are already emmc nodes in rk3288-tinker-s.dts, adding these nodes
to rk3288-tinker.dtsi will cause emmc busy loop on original Tinkerboard.
Signed-off-by: Jack Chen <redchenjs@live.com>
Adds Xilinx Bootgen tools to build environment (alongside sunxi-tools, etc ..)
Adds new SoC family Zynq (7000 series, not MP/UltraScale)
Adds new board Avnet MicroZed
* add device tree overlays to handle boards with power regulation issues,
* fix misconfiguration issues in overlays
* add missing wireguard module for rk322x-current and -edge
* Re-enable network checksum TX offload on rockchip64 family
* Adjust gmac PBL setting for rk3399 legacy to fix network issues with MTU 1500
* Adjust gmac PBL setting for rk3328 in rockchip64-legacy to fix network issues with MTU 1500
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
- Enabled nfc on rk322x-dev and disable on rk322x-current (need further development)
- Tidied up rk322x-current device tree
- enabled nfc rockchip driver enabled in rk322x-dev kernel config
- Enabled EHCI controller in u-boot (added patch for inno-phy, device tree and config bits), better device detection for dwc2 usb otg port
- Removed SPL_FIT_GENERATOR from u-boot configuration, fixed .its file to use binman
- fixed rk322x its file (now includes dtb), reverted u-boot to v2020.10 and changed dev_* into log_debug() calls
* Adjust the RK808 buck step to improve stability
* Adjust vdd_log and enable vdd_center init voltage
For some reason, regulator-init-microvolt property under PMIC does not applied. Set the voltage on board file.
* Explicitly set vdd_log voltage for NanoPi M4V2 - possibly fix stability issues
* Regulator tweaks for NanoPi M4V2
* Add vdd_log to kernel and switch vdd_center back to 900mV
* Switch vdd_center to 0.95
* Make rk80x bucks voltage steps shorter to make the NanoPi M4V2 stable
* Tweak u-boot config for NanoPi M4V2
* Made the rk808 voltage steps configurable and configured 50mV for NanoPi M4V2
* Bump rockchip DEV 32b to 5.11.y
* Move mvebu64 DEV to 5.11.y
* Move Rockchip64 DEV to 5.11.y
Disabling general-rkvdec_nv15.patch - need more attention
* Add Meson DEV / Odroid C1
* Move OdroidXU4 DEV to tobetter's 5.11.y branch
* Bump sunxi DEV to 5.11.y
* Bump mvebu DEV to 5.11.y
* mvebu: Patch kernel to fix SATA write performance regression
Add an upstream patch that fixes SATA write speed regression that
appeared in kernel 5.9.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
* Create 0001-Revert-block-simplify-set_init_blocksize-to-regain-l.patch
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
- for manual/auto control of pwm fan (in the ODROID HC4 for example)
- original is at 8a63de9e2a
- discussion https://patchwork.kernel.org/project/linux-hwmon/patch/20201125163242.GA1264232@paju/
- I'd be much happier with a cooling map in the DTB, but this makes my fans spin correctly via fancontrol
- this affects all of meson64, but only for PWMs that are already exposed to hwmon
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Enable RTC (hym8563) for Station P1 in mainline (renaming DT in process)
* Switch Station P1 to rockchip64
* Fix linking for Station P1 device tree in legacy
* rockchip64: Added XHCI HCD USB TRB ENT quirk
On some xHCI controllers (e.g. Rockchip RK3399/RK3328/RK1808), they need
to enable the ENT flag in the TRB data structure to force xHC to
prefetch the next TRB of a TD.
Enable the quirk on RK3399 through device tree node properties.
Ported from Rockchip Linux 4.19
* add to dev branch
Polished and fixed xt-q8lv-10 rockchip-legacy dtb
Reworked act8846 reboot patch for rockchip-legacy (applies, but not yet working though)
Renamed kernel updated patches in rockchip-legacy directory adding "04-" prefix to make them uniform with existing
This patch (most likely taken from OpenWrt) only applies to ARMADA-XP
hardware, none of which is supported by Armbian.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
