- Enabled nfc on rk322x-dev and disable on rk322x-current (need further development)
- Tidied up rk322x-current device tree
- enabled nfc rockchip driver enabled in rk322x-dev kernel config
- Enabled EHCI controller in u-boot (added patch for inno-phy, device tree and config bits), better device detection for dwc2 usb otg port
- Removed SPL_FIT_GENERATOR from u-boot configuration, fixed .its file to use binman
- fixed rk322x its file (now includes dtb), reverted u-boot to v2020.10 and changed dev_* into log_debug() calls
* Bump rockchip DEV 32b to 5.11.y
* Move mvebu64 DEV to 5.11.y
* Move Rockchip64 DEV to 5.11.y
Disabling general-rkvdec_nv15.patch - need more attention
* Add Meson DEV / Odroid C1
* Move OdroidXU4 DEV to tobetter's 5.11.y branch
* Bump sunxi DEV to 5.11.y
* Bump mvebu DEV to 5.11.y
* Enable RTC (hym8563) for Station P1 in mainline (renaming DT in process)
* Switch Station P1 to rockchip64
* Fix linking for Station P1 device tree in legacy
`CONFIG_RTL8188EU` seem no longer exist in config. Unable to find in menuconfig. Therefore removed.
@ThomasKaiser FYI: `CONFIG_CRYPTO_ZSTD` has been forced to `y` by `ZSWAP_COMPRESSOR_DEFAULT_ZSTD [=y] && <choice>`
Standard firewall features were introduced in
6a165742e8 but then removed in
6788786057. This commit restores them and also
adds support for the tc-mirred action.
* [rockchip64-current] add gamepad and joystick support
Added modules similar to rockchip64-legacy
* [meson{64}-current] add gamepad and joystick support
* [gitignore] temp vim files
* [sunxi{64}-current] add gamepad and joystick support
* [mvebu{64}-current] add gamepad and joystick support
* [misc dev] add gamepad and joystick support
* [meson and sunxi legacy] add gamepad and joystick support
* [misc legacy] add gamepad and joystick support
- curently attached to RC7 as https://github.com/armbian/build/pull/2378
- config derived from current and contains all latest changes
- dirty reboot and eth0 reset hacks are not added and can be added later if still needed (need_check subfolder)
* Add WIP support for Orangepi Zero 2
* squeeze H616 patches into sunxi-dev
* Update linux-sunxi64-dev.config
* H616: Limit CPUMAX
* Enable DEV only
* H616: remove patches from sunxi-current
* H616: apply new patchset
Co-authored-by: EvilOlaf <werner@armbian.de>
Co-authored-by: Werner <EvilOlaf@users.noreply.github.com>
* sunxi: kernel: current/dev: enable sun6i-csi and disable LL debug on UART0
The former is useful on some boards, e.g. PineCube.
The latter blocks boards that do not utilize UART0 from booting.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: add new family sun8i-v3s
This family is intended for boards with V3/V3s/S3/S3L chips and low
DRAM capacity.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: add PineCube board
This board features Sochip S3 SoC (Allwinner V3 die + co-packaged 128MiB
DRAM), and an OmniVision OV5640 camera is shipped with the board.
Add support for it. It could be used as an IP camera then.
Kernel support is only added to current/dev branch, with dev just using
mainline-merged DT and current using backported DT from 5.10-rc.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: kernel: current/dev: add V3s OHCI/EHCI nodes
These are needed for USB host on V3s boards to work.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Although enabling this feature can have performance gain, this is
proven to be broken on new kernels and is dropped in linux-next now
in git commit 80bf194625f5.
Disable this to fix ZRAM issues and get future proof on this feature.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
- move Odroid C4 from legacy u-boot toward mainline
- get rid of dirty legacy u-boot code
- get rid of FAT boot partition
- briefly tested
- both kernels can operate with one standard boot script
- add upstream patch and adjust config
- fix console
- don't clock C4 too high by default
Without this option enabled, we will not be able to use the setcap tool to set file capabilities on a F2FS partition.
Signed-off-by: Jack Chen <redchenjs@live.com>
Removed default-sample-phase property for base rk322x-box device tree
Enabled spdif out for rk322x-current and -dev flavours
Removed reserved node in device tree, u-boot v2020.10 and OPTEE autoconfigure reserved zones automatically
* Enable TARGET_CORE module to run & publish iSCSI targets on armbian.
* Enable all iSCSI modules (IBLOCK,FILEIO,PSCSI) on all platforms.
* Revert "Enable all iSCSI modules (IBLOCK,FILEIO,PSCSI) on all platforms."
This reverts commit 7ab3882e0c.
* Enable all iSCSI modules (IBLOCK,FILEIO,PSCSI) on all platforms.
Co-authored-by: Luis Garcia <luis@Disgaea.local>
- Chanaged default x.org configuration to disable glamor
- Reintroduce patch to use DRM cursor plane as overlay in rk322x-current and -dev
- Updated wifi patches for kernel 5.8.10
- Bumped rk322x to u-boot v2020.07, removed reserved zones from device trees
- Updated OPTEE to v3.10, using ddrbin v1.10
- Bumped rk322x-current to kernel 5.8.y
- Imported new patches from knaerzche's LibreELEC fork for rk322x-dev (kernel 5.8.y)
- Adjusted existing patches to match changes, updated rk322x-dev kernel config file
- Add default modprobe conf file for esp8089 to force the crystal frequency to 40Mhz for rk322x targets
- Removed ssv6051 firmware packages to move to armbian-firmware repository
- Switching ssv6051-wifi.cfg to /lib/firmware for rk322x-legacy
- Removed P2P interface for esp8089 driver for rk322x-legacy
- Optimized ssv6051 performance: kernel module gains -Os flag, disabled p2p interface, enabled HW crypto for CCMP cipher
- Enabled remote control interface, IR GPIO kernel module and HDMI CEC modules
* Switched rockchip64 curent to kernel 5.8.y
* Enforce CRLF in one of the wifi patches for rockchip64-current
* Removed uneeded wifi patches for rtl8189fs from rockchip64-current
Tested once again on N2/N2+
Note: disabled mesond_vdec module in kernel config since it crashes complete video system when loaded. Need to be added back once stable - or perhaps we need to adjust some parameters?
Adapted rk322x-dev to kernel 5.8.y
Added ssv6x5x driver to legacy kernel, rk322x-config now allows the user to select which driver load at boot
Added esp8089 kernel module, device tree overlay and detection in rk322x-config script
Fixed some indentation
Added reset button binding
Added sdcard debounce
Fixes indentation, added device tree overlay for high-leakage cpus
Added support for bluetooth device tree overlay and realtek systemd service for rk322x targets
* Add initial Helios64 configuration
Add ethernet udev rules
Added disable auto power on script during shutdown
Configure ALSA to output audio to (DisplayPort) USB type-C
armbian-firstrun: exclude helios64 from generating fixed_mac
Each network interface on Helios64 already assigned to unique MAC
address in factory. Assigning Network Manager with cloned MAC is not
needed.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: rk3399: Add Helios64
Use rockchip propriettary loader
* kernel: rk3399-legacy: Update r8152 to support 2.5GbE USB RTL8156
Required for Helios64
* kernel: rk3399-legacy: update Rockchip PCIe driver
Port changes by ayufan on rockchip64.
* kernel: rk3399-legacy: Add support for Helios64
Add Helios64 device tree.
Enable missing driver/kernel module.
Auto load lm75 modules
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rk3399-legacy: rework roc-rk3399-pc patch
the patch broken due to additional line added by helios64 on
arch/arm64/boot/dts/rockchip/Makefile
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rk3399-legacy: update Rockchip PCIe driver
Backport bugfix from mainline
refer to
https://patchwork.kernel.org/patch/11561979/
and
https://patchwork.kernel.org/patch/11561977/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rockchip64-current: Add support for Helios64
Add Helios64 device tree.
Enable missing driver/kernel module.
* config: helios64: use mainline ATF on current branch
and u-boot TPL/SPL instead of Rockchip proprietary loader
* helios64: u-boot v2020.07 update
* Add Helios64 target
* kernel: rk3399-legacy: update Rockchip PCIe driver
Removed unrelated changes from porting ayufan fixes
Signed-off-by: Piotr Szczepanik <piter75@gmail.com>
* helios64: make use of PACKAGE_LIST* variables
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* Add initial support for Odroid N2+
* Update C4 config and test booting
* Updates to C4, N2, N2+
- merge C4 and N2 legacy under meson64, same u-boot
- upgrade legacy kernel to meed DTB from mainline
- merge N2 and N2+, add a hack to display + in motd when N2+ is detected
- shortly spin N2 fan at startup
- merged N2 mainline and legacy boot script
- add upstream patches
* One of the regulators were breaking booting of Odroid N2
Co-authored-by: Werner <EvilOlaf@users.noreply.github.com>
In PR #869 / commit 674cd23c GPIO_SYSFS was enabled, but somehow,
probably when branches were shuffled (150ac0c) it was enabled. Anyhow, I
needed GPIO on my Espressobin so I enabled it for -current and -dev.
Signed-off-by: Jorik Jonker <jorik@kippendief.biz>
* Move current to 5.7.x
* Update linux-rockchip-current.config
* Move dev patches to current
* copy dev to current
* move dev patches to current
* move rockchip64-current to 5.7.x
* Add HDMI sound support for Allwinner A10, A20, A31
Closes https://github.com/armbian/build/issues/2084
* Enable HDMI audio in kernel config and update config with misc modules
* Bump sunxi to 5.7.y
* Further cleanup 32bit works, 64bit needs more patches adjustement
* Also arm64 boots, SPI flash areas were refactored, new location is a bit fuzzy, leaving behind
* More fixed and cleanings, both variants builds now, but without overlay support
* fix sunxi overlays in AR-329 branch
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Co-authored-by: Martin Ayotte <martinayotte@yahoo.ca>
* Initial commit for kernel boot splash
* Add startup files to disable bootlog when system is up / down
* Update logo, remove deprecated one
* Introduce new u-boot variable bootlogo
* Adjust kernel config
* Make logo possible on Odroid XU4
- add legacy and current upstream patches
- delete xu4 environment since its not used
* Cleanup C2,C4, both tested, logo works on mainline,
- adding legacy upstream patches for c4
* Enable bootlogo by default on Odroid N2
* Enable logo on RK3399 desktop images
* Cleanup the rest of the environment files
* Add initrd hook that copy splash file to initrd.
* Missing logo bits for one boot scripts
* Enable boot logo on Pinebook A64
* Enable bootlogo on Teres
* Update config
* Adjust Rockchip64 dev and add PBPro stuff
* Remove deprecated patches
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Merge config with current
* Introducing Rockchip rk322x SoC support
Main features:
- Legacy kernel flavour based upon stable v2.x rk3288 Rockchip branch (https://github.com/rockchip-linux/kernel/tree/stable-4.4-rk3288-linux-v2.x)
- Current kernel flavour based on mainline 5.6.y kernel
- Mainline u-boot (v2020.04)
- Single generic tv box target (rk322x-box) which boots on all the known tv boxes
- Hardware devices (eMMC/NAND, led wiring configuration, SoC variant selection) modulation done by user at runtime via device tree overlays - a script (rk322x-config) is provided for autodetection and simple configuration by inexperienced users;
- Bits added to armbian-hardware-optimization to set affinity for irq handlers
- rk322x-box targets already added to targets.conf for automatic image creation
* Removed disabled patches
* Restored mysteriously removed comment character
* Moved rockchip-dev to kernel 5.7, removed already upstreamed patch (1016), adjusted conflicting patch (1015)
Most kernel configuration answer left at default, notables:
- Wireguard (as module)
- Zswap default compression set to LZO
- RK3288 GPIOMEM (as module)
- Enabled some new DMABUF bits (heaps, cmas)
- Hantro driver
- F2FS compression
* Disabled rx/tx dma for uarts, on my board causes system freeze during bluetooth initialization. Don't know if they ever worked, tried to enable them ages ago and they were already not working
* Attach Meson64 CURRENT to 5.6.y and make DEV = CURRENT at this point.
There is a lot of changes to 5.7.y and can be done after release or by someone that feels a need for this right now.
* Delete meson64_fclk_div3.patch
this fix has been upstream for some time, I had issues with it on 5.4, which is why it had been removed there.
* [ meson64 current ] kconfig tweak
disable Rockchip SoC drivers
* [ meson64 current ] remove rockchip patches
* [ meson64 current ] disable CMA patch GX
* [ meson64 current] add libretech cc audio patch
This brings the dts even with the khilman 5.8/integ branch which includes all of the audio changes. The kernel is registering audio devices, however nothing comes out. committed in case someone wants to spend time debugging/testing theories.
* fix permissions
was editing from another machine, accidental change of permissions in the patch
* Set default mixer settings
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* [ meson64 current ] GXL audio commit
This moves to the mainline patches and covers le potato and la frite. Adjusted asound config to handle a commonized sound card name.
* [ meson64 current ] add gxbb audio WIP
Playback is too fast, a clock setting is off somewhere.
* Update kernel configs
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Co-authored-by: Tony <tonymckahan@gmail.com>
* Switching Odroid C1 boot partition to FAT
U-boot FAT driver is very unstable and there is no wish to dig into u-boot. Seems like a sane workaround @plntyk
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add notes for separate boot partitions
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Typo
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bugfix: use zImage for converting to uImage since on FAT partitions we use move
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Cleanup C1 boot scripts
We have no plans to ever support legacy kernel again. Removing related things
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* A bit more radical change. Moving meson current to (new) legacy, current to 5.6.y and dev to some development branch / commit.
* Remove unneded patch
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* enable and change odroidc1 config
remove EOS
enable current and dev config
meson-current: update config
meson-dev: update config
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* meson-current meson-dev: reduce Kernel size
with default loading locations in u-boot
the uImage can be too large and will be partly overwritten
with the loaded dtb leading to boot failues due to wrong checksum
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* odroid-c1: change default loglevel
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* meson: fix odroidc1 boot and create uImage
without uImage the board will not boot
take the already used hack (?) from
general-kernel-odroidn2-current.patch
since KERNEL_IMAGE_TYPE does not work as expected
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* Update targets.conf
* Update targets.conf
* Update targets.conf
* Making a bigger diff
* Removing build_minimal
One can choose what to build, while build targets are defined elsewhere
* Governor interactive n/a
* Updating config
Cause of changes in boot.ini we don't need to worry about size. After few tests, no problems sighted.
Tested running Docker.
* Adjust dev config too
Tested.
* Update odroidc1.conf
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
It doesn't want to boot on 5.4.y. Adjusting kernel config, fix Docker dependency problem, move few other minor fixes from openwrt and closing https://github.com/armbian/build/issues/1453
