Initial support for ODROID M1S
Tested with Debian Bookworm and Noble Cinnamon and Noble GNOME desktop
environment.
See: https://forum.armbian.com/topic/33242-odroid-m1s-image-planned/
- few fixes, rebase
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
> The kernel upstream fixed the missing PWM pinctrl C code for g12b and
> sm1, but did not add these PWM pinctrl nodes in the device tree.
> Therefore, only need to delete the
> meson-g12b-pinctrl-Add-missing-pinmux-for-pwm.patch from the repository
> and add a meson-g12b-dt-Add-missing-pinmux-node-for-pwm.patch.
> This patch does not include all PWM pinctrl nodes, only adding some
> g12b PWM pinctrl nodes as in the old patch. Notably, pwm_b_z_pins was
> renamed to pwm_b_z0_pins, but this is not used in the build repository.
- thus:
- added `meson-g12b-dt-Add-missing-pinmux-node-for-pwm.patch`
- dropped `meson-g12b-pinctrl-Add-missing-pinmux-for-pwm.patch`
- kept `dt/meson-g12b-a311d-cainiao-cniot-core.dts`
Co-authored-by: retro98boy <retro98boy@qq.com>
- using the same DT as the rockchip64-6.16
- defconfig based on Rock5b, so we can eventually use the same fusb302 when time comes
- -u-boot.dtsi enables `ums` / `rockusb` et al using the middle usb-c port (orientation sensitive)
- enables booting from NVMe
- TODO: sd/usb/nvme/mmc boot order
- this maps copying files from dirs in the patch directory directly to the u-boot tree, without any .patch required:
- `defconfig` -> `configs` (useful for all)
- `dt_uboot` -> `arch/arm/dts` (useful for most; use for xx-u-boot.dtsi or stuff without CONFIG_OF_UPSTREAM)
- `dt_upstream_rockchip` -> `dts/upstream/src/arm64/rockchip` (useful for Rockchip boards)
- other mappings (eg `dt_upstream_xxx`) might be added later
Some FriendlyElec NanoPC-T6 boards use a A3A444 eMMC chip. Under heavy I/O load when running in HS400 mode, this will often result in I/O errors.
Reducing the eMMC frequency from the default 200000000 Hz to 150000000 Hz improves stability and eliminates the I/O errors.
* rockchip: Add NanoPi M5 board support to edge kernel
* rockchip64: enable Rockchip ASoC drivers and codecs in kernel config
* config: Fix audio Kconfig tristate hierarchy
Set CONFIG_SOUND, CONFIG_SND, and CONFIG_SND_SOC to built-in (y)
to allow Rockchip audio drivers to be built-in instead of being
silently downgraded to modules by olddefconfig.
* nanopi-m5: Add asound.state for audio configuration
* nanopi-m5: Fix SAI2 clock output
* import new layout for libreelec patches (no more mbox)
* refactor existing patches to kernel 6.17
* fix uboot issue causing VOP IOMMU page fault and no screen
* Khadas VIM4: U-Boot: Mod bootargs/defconfig and add bootscr support
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Pull U-Boot from CoreELEC instead of Khadas
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Remove setexpr bootargs sub rootfstype= from boot.cmd
This is no longer required
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson S4T7: family.conf: Add missing `mkdir -p "${tbasedir}"`
The toolchains fail to download because the dir isn't created
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson T7: Add rootfstype= to command line
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Add extra boot arguments
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Remove `viraniac` as maintainer and add `rw` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Add `fsck.repair=yes` and `rootwait` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Move `${bootargs}` placement
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Co-authored-by: Igor <igor@armbian.com>
When patches outside the series are in the target folder
KERNELPATCHDIR = "archive/sunxi- $ {KERNEL _ MAJOR _ MINOR}"
they create problems for all other patches in the series
and are difficult to move to the new kernel version because
they are not properly designed.
Move the patches to a separate development folder until
the design is fixed so that we can add them to the series.
Add board configuration for FriendlyELEC NanoPi R76S, including:
- nanopi-r76s.conf with board parameters and boot settings
- initial kernel / U-Boot patch for device tree and board bring-up
XpressReal(https://xpressreal.io/) is a family of Single Board Computers
developed in collaboration between Fyde Innovations, Radxa and Realtek.
XpressReal T3 is the first product in the family - a small form factor
high performance single board computer powered by the Realtek RTD1619B,
which runs FydeOS/openFyde and Linux!
Now we are adding the awesome Armbian Linux support for XpressReal T3!
This commit introduces some binary files that XpressReal T3 needed:
- firmware/realtek/rtd1619b
These binaries are the firmware for rtd1619b peripherals
(including the audio decoder, video decoder, etc.).
- u-boot-fw.tar.gz
This contains some co-processor firmware,
which needs to be loaded by u-boot in the early stage of boot.
- u-boot-prebuilt.tar.gz
These are hwsettings related files, used for tasks such as DDR initialization.
These files come from the rtd1619b SDK, which has already been open-sourced on our github:
- [firmware](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-kernel/linux-firmware/files/rtd1619b)
- [u-boot prebuilts](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-bsp/u-boot/files/prebuilt/rtd1619b)
Switch to newer U-Boot since it works reliably and provides upstream
improvements.
Add patch/u-boot/v2025.10 and the generic patch, as BOOTPATCHDIR cannot
be unset (fallback to legacy fails).
BOOT_SCENARIO="binman-atf-mainline" cannot be set here since it applies
globally to the CSC file and would break branch=vendor. Users who want
it can enable it manually.
Affected kernels:
- odroidxu4-6.6
- spacemit-6.6
the following script gets it mostly (!) right
for patch in patch-6.6.*; do
# Extract the numbers using parameter expansion
num1=${patch:10:2} # Get the first number (2 digits)
num2=${patch:13:2} # Get the second number (2 digits)
# Pad the numbers with leading zeros
padded_num1=$(printf "%03d" "$num1")
padded_num2=$(printf "%03d" "$num2")
# Construct the new patch name
new_patch="patch-6.6.${padded_num1}-${padded_num2}.patch"
# Rename the file using git mv
git mv -v "$patch" "$new_patch"
done
