mixtile-blade3: u-boot: edge: v2025.10-rc3; add dts/u-boot.dtsi/defconfig
- using the same DT as the rockchip64-6.16 - defconfig based on Rock5b, so we can eventually use the same fusb302 when time comes - -u-boot.dtsi enables `ums` / `rockusb` et al using the middle usb-c port (orientation sensitive) - enables booting from NVMe - TODO: sd/usb/nvme/mmc boot order
This commit is contained in:
Ricardo Pardini
Igor
parent
0c5d3bade2
commit
2e21057d52
@ -27,20 +27,20 @@ function post_family_config__vendor_uboot_blade3() {
|
||||
declare -g BOOTPATCHDIR="legacy/u-boot-radxa-rk35xx"
|
||||
}
|
||||
|
||||
function post_family_config__meko_use_mainline_uboot() {
|
||||
function post_family_config__blade3_use_mainline_uboot() {
|
||||
if [[ "${BRANCH}" != "edge" ]]; then
|
||||
return 0
|
||||
fi
|
||||
|
||||
display_alert "$BOARD" "mainline (next branch) u-boot overrides for $BOARD / $BRANCH" "info"
|
||||
|
||||
declare -g BOOTCONFIG="generic-rk3588_defconfig" # MAINLINE U-BOOT OVERRIDE
|
||||
declare -g BOOTCONFIG="mixtile-blade3-rk3588_defconfig" # MAINLINE U-BOOT OVERRIDE
|
||||
|
||||
declare -g BOOTDELAY=1 # Wait for UART interrupt
|
||||
|
||||
BOOTSOURCE="https://github.com/u-boot/u-boot.git"
|
||||
BOOTBRANCH="tag:v2025.07"
|
||||
BOOTPATCHDIR="v2025.07-mekotronics" # empty
|
||||
BOOTBRANCH="tag:v2025.10-rc3"
|
||||
BOOTPATCHDIR="v2025.10" # with 000.patching_config.yaml - no patching, straight .dts/defconfigs et al
|
||||
|
||||
BOOTDIR="u-boot-${BOARD}" # do not share u-boot directory
|
||||
|
||||
@ -52,6 +52,8 @@ function post_family_config__meko_use_mainline_uboot() {
|
||||
dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
|
||||
}
|
||||
|
||||
# @TODO: boot order stuff; we want to boot nvme / usb / sd before eMMC
|
||||
|
||||
declare -g PLYMOUTH="no" # Disable plymouth as that only causes more confusion
|
||||
}
|
||||
|
||||
|
||||
@ -0,0 +1,98 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SKIP_LOWLEVEL_INIT=y
|
||||
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
|
||||
CONFIG_COUNTER_FREQUENCY=24000000
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-mixtile-blade3"
|
||||
CONFIG_ROCKCHIP_RK3588=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_TARGET_ROCK5B_RK3588=y
|
||||
CONFIG_SYS_LOAD_ADDR=0xc00800
|
||||
CONFIG_DEBUG_UART_BASE=0xFEB50000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_FIT_SIGNATURE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-mixtile-blade3.dtb"
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_SPL_MAX_SIZE=0x40000
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_CMD_TCPM=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_ROCKUSB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_LIVE=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_AHCI_PCI=y
|
||||
CONFIG_DWC_AHCI=y
|
||||
CONFIG_SPL_CLK=y
|
||||
# CONFIG_USB_FUNCTION_FASTBOOT is not set
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_SUPPORT_EMMC_RPMB=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_RTL8169=y
|
||||
CONFIG_NVME_PCI=y
|
||||
CONFIG_PCIE_DW_ROCKCHIP=y
|
||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
|
||||
CONFIG_PHY_ROCKCHIP_USBDP=y
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BAUDRATE=1500000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550_MEM32=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_GENERIC=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_GENERIC=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_SPL_USB_DWC3_GENERIC=y
|
||||
CONFIG_TYPEC_TCPM=y
|
||||
CONFIG_TYPEC_FUSB302=y
|
||||
CONFIG_USB_HOST_ETHER=y
|
||||
CONFIG_USB_ETHER_ASIX=y
|
||||
CONFIG_USB_ETHER_ASIX88179=y
|
||||
CONFIG_USB_ETHER_LAN75XX=y
|
||||
CONFIG_USB_ETHER_LAN78XX=y
|
||||
CONFIG_USB_ETHER_MCS7830=y
|
||||
CONFIG_USB_ETHER_RTL8152=y
|
||||
CONFIG_USB_ETHER_SMSC95XX=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
CONFIG_USB_FUNCTION_ROCKUSB=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
@ -0,0 +1,2 @@
|
||||
#include "rk3588-generic-u-boot.dtsi"
|
||||
|
||||
@ -0,0 +1,769 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Mixtile Blade 3";
|
||||
compatible = "mixtile,blade3", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
cooling-levels = <0 50 100 150 200 255>;
|
||||
pwms = <&pwm8 0 250000 0>; /* aka GPIO3_D0 / PWM8_M2 On 4-pin fan header */
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
pulses-per-revolution = <2>;
|
||||
interrupt-parent = <&gpio3>; /* GPIO GPIO3_B1/PWM2_M1 */
|
||||
interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>; // On 4-pin fan header
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usbdcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usbdcin>;
|
||||
};
|
||||
|
||||
pcie20_avdd0v85: pcie20-avdd0v85-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie20_avdd0v85";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
vin-supply = <&vdd_0v85_s0>;
|
||||
};
|
||||
|
||||
pcie20_avdd1v8: pcie20-avdd1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie20_avdd1v8";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&avcc_1v8_s0>;
|
||||
};
|
||||
|
||||
pcie30_avdd0v75: pcie30-avdd0v75-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd0v75";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
vin-supply = <&avdd_0v75_s0>;
|
||||
};
|
||||
|
||||
pcie30_avdd1v8: pcie30-avdd1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd1v8";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&avcc_1v8_s0>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_vcc3v3_en>;
|
||||
};
|
||||
|
||||
vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3_sd_s0";
|
||||
gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_pwr>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
mem-supply = <&vdd_cpu_big0_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
mem-supply = <&vdd_cpu_big0_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
mem-supply = <&vdd_cpu_big1_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
mem-supply = <&vdd_cpu_big1_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-0 = <&i2c4m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* exposed on the 30-pin connector; shows up as i2c-3 */
|
||||
&i2c5 {
|
||||
pinctrl-0 = <&i2c5m3_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2_2ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s2m1_mclk
|
||||
&i2s2m1_lrck
|
||||
&i2s2m1_sclk
|
||||
&i2s2m1_sdi
|
||||
&i2s2m1_sdo>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Temperature sensor near the center of the SoC */
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
trips {
|
||||
package_hot: package_hot {
|
||||
hysteresis = <2000>;
|
||||
temperature = <40000>; /* 40 celsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&package_hot>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&pcie2x1l0 { // combphy1, to ASM1182e
|
||||
reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
rockchip,init-delay-ms = <100>;
|
||||
//pinctrl-names = "default";
|
||||
//pinctrl-0 = <&pcie2_0_rst>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l1 { // combphy2, to miniPCIe socket
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
rockchip,init-delay-ms = <100>;
|
||||
//pinctrl-names = "default";
|
||||
//pinctrl-0 = <&pcie2_1_rst>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// kd o pcie2x1l2??! nao tem mesmo.
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
// NO! rockchip,phy-aggregated;
|
||||
// kd o aggregation do vendor?
|
||||
// rockchip,pcie30-phymode = <PHY_MODE_PCIE_AGGREGATION>; /* P1:PCIe3x2 + P0:PCIe3x2 */
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_rst>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pd_gpu {
|
||||
domain-supply = <&vdd_gpu_s0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
sdmmc {
|
||||
sdmmc_pwr: sdmmc-pwr {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
//pcie2 {
|
||||
// pcie2_0_rst: pcie2-0-rst {
|
||||
// rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
// };
|
||||
|
||||
// pcie2_1_rst: pcie2-1-rst {
|
||||
// rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
// };
|
||||
//};
|
||||
|
||||
pcie3 {
|
||||
pcie3_rst: pcie3-rst {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie3_vcc3v3_en: pcie3-vcc3v3-en {
|
||||
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm8 { // 4-pin FAN HEADER, PWM OUTPUT
|
||||
pinctrl-0 = <&pwm8m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm14 {
|
||||
pinctrl-0 = <&pwm14m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm15 {
|
||||
pinctrl-0 = <&pwm15m3_pins>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&spi4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi4m2_cs0 &spi4m2_pins>;
|
||||
num-cs = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc_1v8_s0>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
// hs400 causes immediate trouble, hs200 works at around 150mb/s
|
||||
// mmc-hs400-1_8v;
|
||||
// mmc-hs400-enhanced-strobe;
|
||||
mmc-hs200-1_8v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
// // See https://damwold5pt25n.cloudfront.net/blade3/file/Schematic_Blade_3_v1.1.0.pdf
|
||||
Loading…
Reference in New Issue
Block a user