vdd-log supply is pwm-supply, not vin-supply.
Fixes vdd-log supply ending up the dummy regulator.
[ 1.783479] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 1.783505] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 1.783556] vdd_log: supplied by regulator-dummy
Per https://lore.kernel.org/all/20211227234529.1970281-2-heiko@sntech.de/
there will be no functional change as the supplying regulator is an always-on
fixed-regulator.
RK3328 UART1 and I2C0 are available on Orange Pi R1 Plus LTS 13 pin connector. Add device tree overlay files for rk3328 uart1 and i2c0.
Co-authored-by: schwar3kat <schwar3kat@armbian.com>
- notes in the board file about the RAM issues (tested, confirmed working blob change of #4383 by @pinhaozhang working with u-boot 21.07; `blobless` also works with ATF v2.7 on my known-good-RAM boards)
- tinkerboard-2: add full firmware, for the rtl8822ce PCIe Wifi default card in the tb2 as shipped by ASUS
- tinkerboard-2: uboot: rename `TARGET_TINKER-2_RK3399` to `TARGET_TINKER2_RK3399` to avoid warnings all over
- tinkerboard-2: slower but working Tinkerboard 2S eMMC (HS400+ES to HS200)
- both for u-boot and kernel.
- should not affect 2, only 2S
* Add Rockpi 4C+
* add newer patches:
- apply patches from RadxaNaoki <noaki@radxa.com>
- ref 5652d6f9c2a4e2c50ac1040c0388859381b0616f: arm64: dts: rockchip: add gmac for ROCK 4C+ (#17)
- apply latest patches from Marcone <marco.nelissen@gmail.com>
- ref e39da181b099a86f5440ed1c08fc699d4a65aed7: arm64: dts: rockchip: Make Rock Pi 4C+ ethernet actually work
- ref 8c519612eeb852268371b3c596eec4622460e5bf: arm64: dts: rockchip: add Rock Pi 4C+ LEDs
- ref 726441afe687ea6059bac37f145ff204b75430f7: arm64: dts: rockchip: enable Rock Pi 4C+ wifi
- ref caad7bef3b5558e2598480c0a0089e2ac3cedcdd: arm64: dts: rockchip: enable Rock Pi 4C+ nvme
- ref 6cdc3215d1691bcd2a407a30e88efa0cec179eb2: arm64: dts: rockchip: enable Rock Pi 4C+ OTG
* default top USB3 port to host mode
* get 2nd HDMI port to work at least. :)
* revert OTG USB3.1 port back to otg mode
* [rockpi4c+] update board def. add usb host overlay.
* remove redundant HDMI clocks and voltages
* enable test builds for Rock PI 4 C+
* [rockpi4c+] add USB host overlay
Co-authored-by: Joe Khoobyar <fourheads@gmail.com>
* Add ssv6051p wifi driver for rockchip64 current and edge kernel
* also reorders and tidies device tree overlays for rk3318-box
* increase ssv6051 sdio bus to 50MHz in the driver
This resolves a bug that affects r8153b USB network interface causing the RX interface to hang on load.
On some xHCI controllers (e.g. Rockchip RK3399/RK3328/RK1808),
they need to enable the ENT flag in the TRB data structure
to force xHC to prefetch the next TRB of a TD.
The quirk patch is already applied to dwc3 xhci usb on rockchip64.
Enable the quirk on RK3328 through device tree node properties in rk3328.dtsi
* Rockchip64 Linux-5.10y - drivers for Motorcomm YT8531
renamed the previous "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" to "net-phy-Add-driver-for-Motorcomm-1-YT85xx-PHYs.patch" to fix patch order and added a new patch "net-phy-Add-driver-for-Motorcomm-2-YT8531-PHYs.patch"
The new YT8531 patch is sourced from from Lean's OpenWrt source rockchip/patches-5.10/601-net-phy-Add-driver-for-Motorcomm-YT8531-PHYs.patch.
It is intended to extend a patch identical to Armbian's "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" and is used without alteration.
* Add new board OrangePi R1 LTS (rk3328)
Includes uBoot and support for Linux-5.10y
* Rockchip64 Linux-5.15y drivers for YT8531 and other Motorcomm chips
YT8010, YT8510, YT8511, YT8512, YT8521. The driver patch set is sourced from Xunlong-OrangePi OpenWRT and is used as is, with only a name and makefile change.
A single patch set uses the same underlying source code as the Armbian Linux-5.10y set, but uses inbuilt logic to apply tweaks that depend on the Linux kernel version.
The patch is renamed similarly to the 5.10 patch set, net-phy-Add-driver-for-Motorcomm-T85xx+PHYs.patch to imply code base continuity with the previous similar Armbian patch sets.
* Rockchip64 Linux-5.15y support for Orange Pi R1 Plus LTS
Includes DTS and makefile changes. A driver for net phy YT8531C is in a separate commit
* change orangepi-r1plus-lts.csc to orangepi-r1plus-lts.conf
board is now supported
* - add patch also to 5.16.y
- fix wrong patch permission
* Fix Makefile patch
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Switched rockchip64-current to linux 5.15
* Backported and adjusted patches from rockchip64-current
* Switched rockchip64 edge to 5.16.y (#3499)
* Initial rockchip64-edge at 5.16.y
* Bunch of fixes for rockchip64-edge at 5.16.y
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
Co-authored-by: Leif Sawyer <leif@akhepcat.com>
