* Switched rockchip64 u-boot to v2021.07
* Switched OrangePi R1 Plus to include mainline's R2S device tree
* Added unsingned signed comparison patch from Paolo to fix rk3328 reboots
* Allocate repository cleanup to a separate function.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Add a waiter function to serve a shallow local git repository.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Configuration shallow repository in sunxi64_common.inc file
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Configuration shallow repository in sunxi_common.inc file
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* An example of using the function of creating a shallow local repository.
This example is a very bad crutch.
It is necessary to come up with another option for permanent use.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Fix variable KERNELSOURCENAME as 'name=megous' for sunxi32
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Required variables cannot be empty
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Print an action message.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Bugfix - Bananapi PRO seems to work fine with latest u-boot
Done many reboots and it didn't break. The same has to be tested with other A20 boards
* Set Allwinner 32bit hw to most recent u-boot 2021.07
* Let's move all to 2021.07 and test ...
- starting from Home Assistant OS (HASSOS) setup/patchset, which is stable with pure-mainline
- *huge thanks* to Stefan Agner (@agners) from Home Assistant for his work and help with this
- CONFIG_DRM_MESON=y fixes the order of shutdown callbacks, allowing it to reboot without patches
- this increases the kernel size a bit, due to some dependencies like DRM=y
- remove the shutdown revert patch, allowing other meson64 boards to mainline-reboot
- add fdt/no-map patch fixing the dreaded "SError Interrupt on CPU4" panics that plagued the N2
- move the N2 to mainline u-boot on current (rebased, already done)
- add SPI-enabling DTB variants, which allow writing to SPI NOR flash (and usage instructions in comments)
- add UBOOT_TARGET_MAP and write_uboot_platform_mtd to current, for nand-sata-install to SPI/USB goodness
- remove the UHS-enabling patch, to avoid 1.8v vs 3.3v mess. Make sure to use only A1-rated SD cards as recommended.
- change default cpufreq governor for 24h+ stability
- other patch cleanups:
- move deprecated/non-applying patch to need-check
- remove the HardKernel ODROID-specific reboot driver and DTS patches (odroid-reboot.c) which are now useless.
- remove documentation-only patches (we have enough patches in meson64 without those)
- remove duplicated SAR ADC patches
- remove multiple different and conflicting patches for DTS and emulated-PWM GPIO fan
- now using simple on/off GPIO fan at 30 celsius, unrelated to passive cooling
* meson64: bump u-boot to 2021.07, rework patches
- as always based on chewitt's tree, with differences:
- squashed versions of HC4+SATA, Radxa Zero, DT tree sync patches
- so that DTB/config/code changes related to the same feature/board are grouped
- removed documentation changes and Makefile reordering patches
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* meson64: ODROID HC4/N2: simplify/remove board vs family hacks; better SPI support
- thanks to mainline 2021.07 u-boot and it's HC4 config we can remove the conditionals
- boards now define the u-boot vars instead of conditionals in family
- on the HC4, build u-boot twice: one for SD (old C4 config) and one for HC4 (new SATA/SPI config)
- reason is that the HC4 version does not work very well unless it is actually booted from SPI
- meson64_common: don't override UBOOT_TARGET_MAP if board-defined
- but the default UBOOT_TARGET_MAP is still defined if the board didn't
- (sneakily) add lm-sensors fancontrol to the HC4's board packages
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* add workaround against default MAC Address (userland utility bdaddr does not work to set MAC Address as expected)
* enable bits for xt-q8l-v10 board (ap6330/bcm4330 part), switching AP6330 bluetooth to btbcm driver using serdev
facilities to avoid userspace machinery with deprecated hciattach tool, added bits to enable driver support in kernel.
Removed ap6330 bluetooth service from bsp packages, added initramfs-tools hook to include bcm4330b1.hcd firmware in initramfs
* Bumping EDGE kernel to 5.14.y
Meson64:
- removing Odroid reboot shutdown patch since its probably not needed anymore
Rockchip64:
- removing Rockpi S. No interest to maintain this any further
- removing PBP suspend. Doesn’t align. Need inspection if some other way was mainstreamed
- temporally removing Orangepi R1
* Re-adding rockpis, pbp suspend, HFLPS170 wifi and cleanup
* Removing deprecated patch, fixing ap6256 wifi
* Re-enable Opi R1 plus, untest
* Add and fix Radxa Zero
* Add support for Radxa Zero
u-boot: new patch based on v2021.04
kernel: use patches sent to kernel list by chewitt
Tested with minimal build and cinnamon desktop:
- SD/eMMC, ok
- USB3, works in USB 2 mode
- HDMI, ok
- WiFi/BT, ok
Signed-off-by: Jack Ma <jack@radxa.com>
* Add build targets
* Cleanup and set min speed to 666000
* Change to WIP target
Support status undetermined
Co-authored-by: Jack Ma <jack@radxa.com>
- done in a single if block in sm1 family
- add nand-sata-install support via UBOOT_TARGET_MAP and write_uboot_platform_mtd
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
- fix/dup bootscript, since new u-boot fixed n2_plus to n2-plus variant
- g12b: if n2 and edge, enable new u-boot; include non-SD version as SPI binary; write_uboot_platform_mtd
- Kernel DTS patch to add SPI-flash-enabled DTBs (slower eMMC), produces -spi .dtbs for n2 and n2-plus
- This could also be an overlay, but I dunno overlays.
- SPI+USB3 boot works with "pendrive" storage, untested with cabled/high power USB->SATA or USB->NVMe
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* revert xcfe to old look
* fix login screen xfce old look
* Re-add monitorVirtual-1
* There is not such icon
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* added packages to remove that dont need to be installed
removed gnome-software and snapd snap store.
* remove package not to be installed in builds
remove scrcpy whic installs jre nto to be installed due to resources
- add mtd-utils to PACKAGE_LIST_BOARD.
- this should be enough to wipe Petitboot;
- more investigative work and u-boot building is needed for SPI+SATA boot
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
- We really want the u-boot.bin.sd.bin for HC4
- During VIM3L-adding commit, "odroid*c4" was replaced with "odroid-c4" and "odroid-hc4"
- Which is cool but it's actually "odroidc4" and "odroidhc4"
- Add a warning to save future time if no FIP tree decided by SM1 family
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* bump rockchip64 ATF to 2.5
v2.5 includes our patches and some other RK3399 improvements
* Delete power domains patch
included in ATF v2.5
* Delete fix-reset-in-v2.2.patch
Included in v2.5
* disable logging patch
&console.console is causing a compile error with ATF v2.5. I haven't looked into it yet, disable for now.
* Add experimental suspend support for PBP
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
- via Jeremiah Cornelius on the Armbian Forums
- also clarify comment about 2 dtbs in mainline kernel
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
8feb39511a
Reading package lists...
E: Package 'libappindicator3-1' has no installation candidate
E: Package 'gir1.2-appindicator3-0.1' has no installation candidate
Building dependency tree...[ error ] ERROR in function create_rootfs_cache [ debootstrap.sh:311 ]
Manual testing assembling om:
- Debian Buster XFCE
- Debian Bullseye XFCE
- Debian SID XFCE
after revert to make sure everything works.
10 rootfs cache files are recreated and redistributed to the CDN due to this change so it is important that we don't make a bug here.
* Make RC runner more universal and fix a bug in build beta images - calculating wrong paralleling parameter
* We don't need separate build config for RC images
* Upgrading sunxi and sunxi64 EDGE to 5.13
Both variants tested for building
* Bump imx6 to 5.13.y
Tested
* Bump Jetson nano kernel to 5.13.y
* Move mvebu and mvebu64 edge to 5.13.y
* move pinebook tweaks
* fix dest
* Add also special keys definitions
* Clear out tech dept
* Delete prepare.sh
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* fixed a typo in budgie in the create-desktop.sh
mkdir -o to mkdir -p to fix making a dir
* updating deepin to current build status
* updated package list for new packages
* add DFI driver to provide hardware-based memory controller load
* adapted DRAM Memory Controller driver from rk3328, add necessary headers
* provide device tree overlays to enable DDR3 clock scaling
* adapted rk322x-box to allow DDR speed bin selection to user
* add ipb900 board gpio configuration
* add rtl8723cs driver to linux-current kernel
* use ddrbin v1.10 set to 330 Mhz at boot
* provide overlays for ddr3 at 330, 528, 660 and 800 mhz
* split emmc overlays to enable options by user choice
* modified rk322x-config to support dmc, emmc overlays
* remove optee trust os in favor of rockchip proprietary blob
for dmc functionality
* fixed a typo in budgie in the create-desktop.sh
mkdir -o to mkdir -p to fix making a dir
* fixing walpapers on gnome build
fixing issue ar-855 gnome wallpapers not getting ut inplace
