This is tested on a tinkerboard 2s.
The u-boot dts for tb2 contains other fixes, and the major ones are:
- add missing basic gpio-fan node
- usb-c altmode fix, dts part
- aimed at nanopi-r2s and nanopineo3
- impacts:
- boards (re)using 'nanopi-r2s-rk3328_defconfig' (rk3328)
and:
- boards using U-Boot v2022.04 or
- boards using U-Boot v2022.07
- added explicit dependency on python3-setuptools as (at least) U-Boot
v2022.04 and v2022.07 fail building due to missing 'distutils' for
boards that use U-Boot v2022.04 or v2022.07
On v2025.01 and v2025.04 I get the following error
starting USB...
Bus usb@ff500000: dwc3_meson_gxl_get_phys: usb2 ports: 1
probe failed, error -114
No USB controllers found
So revert back to v2024.10 until sorted.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
- **CHANGE**: This version tries to boot SD first (thus SD -> USB -> NVMe -> eMMC); before it would boot USB before SD
- as Armbian u-boot is possibly deployed to SPI, try to make as compatible as possible; eg enable squashfs support
- enable `setexpr` and `fileenv`, used by HAOS
- HAOS already has support for booting VIM3 from NVMe: https://github.com/home-assistant/operating-system/pull/3784
- borrowed `fileenv` patch from v2025.01 to .04
- Similar treatment that `odroidm1` got in https://github.com/armbian/build/pull/7769
- note: I will be leaving my VIM3 behind in the other side of the globe, so this is my last chance to test
- Fix dram, mmc for h616.
- The prefix is missing if we use OF_UPSTREAM
- upstream: arm64: sun50i-h616: sync with sunxi-6.12 kernel
- upstream: arm64: Add sun50i-h618-bananapi-m4-berry.dts
* Create rk3588-orangepi-5-ultra.dts
* Create orangepi5-ultra.csc
* fixups
* add notes
* fix u-boot compilation
* Update to v7 patch series
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20250222193332.1761-1-honyuenkwun@gmail.com/
* Update rk3588-orangepi-5-ultra.dts
While I don't fully understand either the `kernel-dtb` command nor the dt syntax itself for some reason the `nophandles` version stripped more than actually phandles. Lets see what happens this way.
* Delete patch/kernel/integrate-6.15/0001-tools-Makefile-remove-pci-target.patch
* disable OPTEE
c81f89ca90
- as Armbian u-boot is possibly deployed to SPI (replacing Petitboot),
try to make as compatible as possible; eg enable squashfs support
- in this case, `setexpr` and `fileenv` are used by HAOS
- found `fileenv` here 049e1a1949
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
Follow change from radxa 738cda44532c324e07296c95751e3083fa95f282.
Change with command:
sed -i "/CONFIG_OPTEE/d" patch/u-boot/legacy/u-boot-radxa-rk35xx/defconfig/*
Contains rewritten dts, based on decompiled dtb from original Klipad50
(as similiar as possible to original).
Kernel defconfig taken from MKSPI (replaced "mkspi" with "mksklipad50")
* add nanopi-r3s.csc board config
* Nanopi R3S - add uboot patch
* Nanopi R3S - add dts
* fix bogus patch header
* Migrate to new patch series
Source & credits https://patchwork.ozlabs.org/project/uboot/list/?series=438193
I still need to figure out how to convert a patch series from patchwork in a way so the build framework doesn't complain about headers and magic and whatever. So a few hundreds of header lines have been replaced with something generic.
Applies and builds fine now against current stable v2024.10
* Create board-nanopi-r3s-fix-leds.patch
Thx https://github.com/armbian/build/pull/7556#issuecomment-2615110100
* Rename board-nanopi-r3s-fix-leds.patch to xx-board-nanopi-r3s-fix-leds.patch
* add new patch
- also LEDs, networking, more supported compression methods...
- copypasta reigns supreme. refactor is coming, just not today
- also hack the u-boot dtsi for consistent-with-Linux-mainline-DT mmc/sd numbering
- this was previously a separate patch in 2024.10
* Correcting the Perf unit's interrupt source number to 66 as stated in the Allwinner A10User manual to resolve conflict with Uart 2 which actually uses interrupt source number 3
* rename to all lower case and add in sun4i-emac dma support. Note that support only exist in the driver for the rx channel
* Ensure that sun4i patches actually implemented
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Apply performance monitoring unit IRQ number patch to uboot
* Add patch for resolving the perf unit irq number to the edge kernel
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Add sun4i emac ethernet DMA support to the edge kernel
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Append missing .patch so that our patch is found and works properly
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Apply EMAC DMA support and PMU fix to edge kernel
---------
Signed-off-by: Ryan L <ryestar101@gmail.com>
* rockchip64: add `BOOT_SCENARIO=binman` for mainline u-boot
- drop special handling for 3308's `legacy` branch
- rpardini: note how SPI/mtd is not yet supported for this scenario
Co-authored-by: Ricardo Pardini <ricardo@pardini.net> (squash/splits, shellfmt)
* `rock-s0`/`rockpi-s`: use `BOOT_SCENARIO=binman`; move blobs to armbian/rkbin
- Move rk3308 boot blobs to armbian/rkbin
- delete obsolete ones
- Alter rock-s0 and rockpi-s to use the new "binman" BOOT_SCENARIO
Co-authored-by: Ricardo Pardini <ricardo@pardini.net> (shellfmt; small fixes; squashes)
- Bump U-Boot from v2024.10-rc3 to v2024.10
- Move U-Boot patch dir to default one (`$BOOTBRANCH/board_$BOARD`) which gets applied automatically by the patcher for the specific $BOARD
- Little fixes: Use `declare -g` and a code style similar to NanoPi R6 series
Removed gpio-keys node (NOTE: add to the M4 Berry DTS)
Add vcc1v8 and vcc3v3 regulators
Fixup MMC nodes
Add bluetooth node (NOTE: BT is still iffy in Armbian)
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Re-extract the kernel patches as a series.
Re-extract the u-boot patches as "git format-patch" command.
Unified patch extraction makes it easier to work with patches.
- in main `rockchip64` family, for current/edge (6.6 / 6.11)
- using mainline u-boot's generic rk3568 for current/edge
- vendor kernel is added via a copypasta hook to piggyback on `rk35xx`
- requires armbian/linux-rockchip PR https://github.com/armbian/linux-rockchip/pull/245
- vendor u-boot:
- is required to bringup npu for vendor kernel (otherwise panics)
- .dts done based on vendor kernel DT + looking at armsom-sige3
- defconfig ripped off from armsom-sige3
There are three revs: AM-GZ80x, AM-GZ80x-US and SC-GZ80x
Add a DSTI in case one should drop out of the sky and we
need a DTS for it. This also removes its dependency on
meson-axg-jethome-jethub-j1xx.dtsi.
Can now power down via power button on the back of the
unit and power back on via reset button on the side.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Add the A83T processor to the sunxi_mmc_can_calibrate
logic function for proper configuration.
Return the default settings of DRAM_CLK.
This code has been tested for bootloader v2024.01 and later.
* Gateway AM-GZ80x: Re-brand as Amper & update u-boot to v2024.04
During a search I noticed other companies are using the same
unit. Lets re-brand to Amper as technically that is the product
brand name.
Signed-off-by: Patrick Yavitz <pyavitz@armbian.com>
* Delete old patch set: `patch: u-boot: v2023.10: board_gateway-gz80x`
Signed-off-by: Patrick Yavitz <pyavitz@armbian.com>
* Update test target
---------
Signed-off-by: Patrick Yavitz <pyavitz@armbian.com>
Co-authored-by: Patrick Yavitz <pyavitz@armbian.com>
Co-authored-by: Igor <igor@armbian.com>
Reference patch set: https://patchwork.ozlabs.org/project/uboot/list/?series=411513&state=*
Hopefully, other boards using same uboot-version can benefit from the added support.
**Note for Maintainers - to enable KASLR seed, you need:**
- `CONFIG_RANDOMIZE_BASE=y` configured in your kernel .config
- `CONFIG_CMD_KASLRSEED=y` and` CONFIG_DM_RNG=y` configure in your u-boot .config
- exposed crypto and rng nodes in you board's device-tree
- `kasrlseed` command before kernel boot in your boot.cmd
- `CONFIG_SECURITY_DMESG_RESTRICT=y` in kernel .config is also advisable
* KASRL-supported u-boot 2024.07 for everyone:
- move /chosen/kaslr-seed support patchset to general 2024.07 BOOTPATCHDIR
- attach nanopi-r5c and oprangepi5-plus BOOTPACHDIR to patches/uboot/v2024.07 general dir
* u-boot: patch nanopi-r5c-rk3568_defconfig and orangepi-5-plus-rk3588_defconfig to enable KASLR
* rewrite-uboot-patches nanopi-r5c/orangepi5-plus
* patches: uboot: Improve kaslrseed support for v2024.07
---------
Co-authored-by: ColorfulRhino <131405023+ColorfulRhino@users.noreply.github.com>
- since 792d9d9d Variables add to environment in post_config_uboot_target function are ignored.
- So setting the variable ATF_LOAD_ADDR doesn't work anymore
- ATF_LOAD_ADDR changed in the uboot patch instead
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
A boot.cmd file still needs to be created, but this is
functional.
Overlay support is now baked into the syslinux patch.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
* To modify the PWM-fan temperature control policy of fine3399 to adjust the fan speed to a lower level
* Integrating support for xiaobaonas boards into the rockchip64-6.9 kernel
- rebased 2 patches
- moved null patches for dts & defconfigs to `dt` / `defconfig` dirs
- rename defconfigs since we're at it; use board-specific only
- defconfigs re-saved
- rebased 3 patches
- moved null patches for dts & defconfigs to `dt` / `defconfig` dirs
- don't rename defconfigs: those are shared with Joshua Riek (ubuntu-rockchip)
- defconfigs re-saved
* bump rk322x-box and rk3318-box to u-boot v2024.07-rc5
* leverage uboot relocation for rk3328
* rework hdmi/vop patches
* fix some usb issues on rk3318-box
* cleanup rk322x-box and rk3318-box old uboot patches
All remaining `media` boards have been integrated into the `rockchip64` family.
- Remove the family config
- Remove all kernel patch folders
- Remove all U-Boot patch folders
- Remove all kernel configs
- add `pre_config_uboot_target` hook for switching BOOTCONFIG across the two targets
- adapt `UBOOT_TARGET_MAP` to not call the defconfig Makefile targets directly, instead, just do a variable assignment (ignored by Make)
- otherwise, when using the defconfig directly in the `UBOOT_TARGET_MAP`, the `post_config_uboot_target` .config changes are overwritten when Make is called
- only patch left is boot usb-nvme-scsi/sata first (still done in meson64.h)
- remove FIP handling from family file `meson-sm1.conf` into board file hook where it belongs
- u-boot: enable more compression methods, EFI debugging, i2c, leds, tcp networking
- use flashcp for mtd writing
- Unchanged:
- confirmed as of v2024.04: using the C4 (not HC4) defconfig is still needed to be able to write to mtd when booted from SD
- also confirmed: one still needs to erase Petitboot using Petitboot, then boot from SD, to be able to flash mainline u-boot to mtd
