mkspi: add U-Boot draft for MKSPI board
copy of rk3328-roc-cc config and DTS files
This commit is contained in:
Maxim Medvedev
Igor
parent
ee42d6924d
commit
f1e0ade2e2
@ -0,0 +1,126 @@
|
||||
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
||||
From: Maxim Medvedev <redrathnure@gmail.com>
|
||||
Date: Sun, 8 Dec 2024 13:52:34 +0000
|
||||
Subject: feat: add U-Boot draft for MKSPI board
|
||||
---
|
||||
configs/mkspi-rk3328_defconfig | 109 ++++++++++
|
||||
1 file changed, 109 insertions(+)
|
||||
|
||||
diff --git a/configs/mkspi-rk3328_defconfig b/configs/mkspi-rk3328_defconfig
|
||||
new file mode 100755
|
||||
index 0000000000..1514ee63bb
|
||||
--- /dev/null
|
||||
+++ b/configs/mkspi-rk3328_defconfig
|
||||
@@ -0,0 +1,109 @@
|
||||
+# Based on roc-cc-rk3328_defconfig
|
||||
+CONFIG_ARM=y
|
||||
+CONFIG_SKIP_LOWLEVEL_INIT=y
|
||||
+CONFIG_COUNTER_FREQUENCY=24000000
|
||||
+CONFIG_ARCH_ROCKCHIP=y
|
||||
+CONFIG_SYS_TEXT_BASE=0x00200000
|
||||
+CONFIG_SPL_GPIO=y
|
||||
+CONFIG_NR_DRAM_BANKS=1
|
||||
+CONFIG_ENV_OFFSET=0x3F8000
|
||||
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-roc-cc"
|
||||
+CONFIG_ROCKCHIP_RK3328=y
|
||||
+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
|
||||
+CONFIG_TPL_LIBCOMMON_SUPPORT=y
|
||||
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
|
||||
+CONFIG_SPL_DRIVERS_MISC=y
|
||||
+CONFIG_SPL_STACK_R_ADDR=0x600000
|
||||
+CONFIG_DEBUG_UART_BASE=0xFF130000
|
||||
+CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
+CONFIG_SYS_LOAD_ADDR=0x800800
|
||||
+CONFIG_DEBUG_UART=y
|
||||
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
|
||||
+# CONFIG_ANDROID_BOOT_IMAGE is not set
|
||||
+CONFIG_FIT=y
|
||||
+CONFIG_FIT_VERBOSE=y
|
||||
+CONFIG_SPL_LOAD_FIT=y
|
||||
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-roc-cc.dtb"
|
||||
+# CONFIG_DISPLAY_CPUINFO is not set
|
||||
+CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
+CONFIG_MISC_INIT_R=y
|
||||
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
|
||||
+CONFIG_SPL_STACK_R=y
|
||||
+CONFIG_SPL_I2C=y
|
||||
+CONFIG_SPL_POWER=y
|
||||
+CONFIG_SPL_ATF=y
|
||||
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
|
||||
+CONFIG_CMD_BOOTZ=y
|
||||
+CONFIG_CMD_GPT=y
|
||||
+CONFIG_CMD_MMC=y
|
||||
+CONFIG_CMD_USB=y
|
||||
+CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
+# CONFIG_CMD_SETEXPR is not set
|
||||
+CONFIG_CMD_TIME=y
|
||||
+CONFIG_SPL_OF_CONTROL=y
|
||||
+CONFIG_TPL_OF_CONTROL=y
|
||||
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
+CONFIG_TPL_OF_PLATDATA=y
|
||||
+CONFIG_ENV_IS_IN_MMC=y
|
||||
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
+CONFIG_SYS_MMC_ENV_DEV=1
|
||||
+CONFIG_NET_RANDOM_ETHADDR=y
|
||||
+CONFIG_TPL_DM=y
|
||||
+CONFIG_REGMAP=y
|
||||
+CONFIG_SPL_REGMAP=y
|
||||
+CONFIG_TPL_REGMAP=y
|
||||
+CONFIG_SYSCON=y
|
||||
+CONFIG_SPL_SYSCON=y
|
||||
+CONFIG_TPL_SYSCON=y
|
||||
+CONFIG_CLK=y
|
||||
+CONFIG_SPL_CLK=y
|
||||
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
|
||||
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
+CONFIG_ROCKCHIP_GPIO=y
|
||||
+CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
+CONFIG_MMC_DW=y
|
||||
+CONFIG_MMC_DW_ROCKCHIP=y
|
||||
+CONFIG_SF_DEFAULT_SPEED=20000000
|
||||
+CONFIG_PHY_REALTEK=y
|
||||
+CONFIG_DM_ETH=y
|
||||
+CONFIG_PHY_GIGE=y
|
||||
+CONFIG_ETH_DESIGNWARE=y
|
||||
+CONFIG_GMAC_ROCKCHIP=y
|
||||
+CONFIG_PINCTRL=y
|
||||
+CONFIG_SPL_PINCTRL=y
|
||||
+CONFIG_DM_PMIC=y
|
||||
+CONFIG_PMIC_RK8XX=y
|
||||
+CONFIG_SPL_PMIC_RK8XX=y
|
||||
+CONFIG_SPL_DM_REGULATOR=y
|
||||
+CONFIG_REGULATOR_PWM=y
|
||||
+CONFIG_DM_REGULATOR_FIXED=y
|
||||
+CONFIG_SPL_DM_REGULATOR_FIXED=y
|
||||
+CONFIG_DM_REGULATOR_GPIO=y
|
||||
+CONFIG_REGULATOR_RK8XX=y
|
||||
+CONFIG_PWM_ROCKCHIP=y
|
||||
+CONFIG_RAM=y
|
||||
+CONFIG_SPL_RAM=y
|
||||
+CONFIG_TPL_RAM=y
|
||||
+CONFIG_DM_RESET=y
|
||||
+CONFIG_BAUDRATE=1500000
|
||||
+CONFIG_DEBUG_UART_SHIFT=2
|
||||
+CONFIG_SYSINFO=y
|
||||
+CONFIG_SYSINFO_SMBIOS=y
|
||||
+CONFIG_SYSRESET=y
|
||||
+# CONFIG_TPL_SYSRESET is not set
|
||||
+CONFIG_USB=y
|
||||
+CONFIG_USB_XHCI_HCD=y
|
||||
+CONFIG_USB_XHCI_DWC3=y
|
||||
+CONFIG_USB_EHCI_HCD=y
|
||||
+CONFIG_USB_EHCI_GENERIC=y
|
||||
+CONFIG_USB_OHCI_HCD=y
|
||||
+CONFIG_USB_OHCI_GENERIC=y
|
||||
+CONFIG_USB_DWC2=y
|
||||
+CONFIG_USB_DWC3=y
|
||||
+# CONFIG_USB_DWC3_GADGET is not set
|
||||
+CONFIG_USB_GADGET=y
|
||||
+CONFIG_USB_GADGET_DWC2_OTG=y
|
||||
+CONFIG_SPL_TINY_MEMSET=y
|
||||
+CONFIG_TPL_TINY_MEMSET=y
|
||||
+CONFIG_ERRNO_STR=y
|
||||
--
|
||||
Created with Armbian build tools https://github.com/armbian/build
|
||||
|
||||
@ -0,0 +1,404 @@
|
||||
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
||||
From: Maxim Medvedev <redrathnure@gmail.com>
|
||||
Date: Sun, 8 Dec 2024 13:58:51 +0000
|
||||
Subject: add U-Boot draft for MKSPI board
|
||||
---
|
||||
arch/arm/dts/rk3328-mkspi.dts | 387 ++++++++++
|
||||
1 file changed, 387 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/dts/rk3328-mkspi.dts b/arch/arm/dts/rk3328-mkspi.dts
|
||||
new file mode 100755
|
||||
index 0000000000..20ca255664
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/dts/rk3328-mkspi.dts
|
||||
@@ -0,0 +1,387 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+/*
|
||||
+ * Based on rk3328-roc-cc.dts
|
||||
+ *
|
||||
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include "rk3328.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Firefly roc-rk3328-cc";
|
||||
+ compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
|
||||
+
|
||||
+ aliases {
|
||||
+ mmc0 = &sdmmc;
|
||||
+ mmc1 = &emmc;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial2:1500000n8";
|
||||
+ };
|
||||
+
|
||||
+ gmac_clkin: external-gmac-clock {
|
||||
+ compatible = "fixed-clock";
|
||||
+ clock-frequency = <125000000>;
|
||||
+ clock-output-names = "gmac_clkin";
|
||||
+ #clock-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ dc_12v: dc-12v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "dc_12v";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <12000000>;
|
||||
+ regulator-max-microvolt = <12000000>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_sd: sdmmc-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc0m1_pin>;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-name = "vcc_sd";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc_io>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_sdio: sdmmcio-regulator {
|
||||
+ compatible = "regulator-gpio";
|
||||
+ gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
|
||||
+ states = <1800000 0x1>,
|
||||
+ <3300000 0x0>;
|
||||
+ regulator-name = "vcc_sdio";
|
||||
+ regulator-type = "voltage";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&usb20_host_drv>;
|
||||
+ regulator-name = "vcc_host1_5v";
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_sys: vcc-sys {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&dc_12v>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_phy: vcc-phy-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc_phy";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ power_led: led-0 {
|
||||
+ label = "firefly:blue:power";
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
|
||||
+ default-state = "on";
|
||||
+ mode = <0x23>;
|
||||
+ };
|
||||
+
|
||||
+ user_led: led-1 {
|
||||
+ label = "firefly:yellow:user";
|
||||
+ linux,default-trigger = "mmc1";
|
||||
+ gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
|
||||
+ default-state = "off";
|
||||
+ mode = <0x05>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&analog_sound {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&codec {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vdd_arm>;
|
||||
+};
|
||||
+
|
||||
+&cpu1 {
|
||||
+ cpu-supply = <&vdd_arm>;
|
||||
+};
|
||||
+
|
||||
+&cpu2 {
|
||||
+ cpu-supply = <&vdd_arm>;
|
||||
+};
|
||||
+
|
||||
+&cpu3 {
|
||||
+ cpu-supply = <&vdd_arm>;
|
||||
+};
|
||||
+
|
||||
+&emmc {
|
||||
+ bus-width = <8>;
|
||||
+ cap-mmc-highspeed;
|
||||
+ max-frequency = <150000000>;
|
||||
+ mmc-ddr-1_8v;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
+ vmmc-supply = <&vcc_io>;
|
||||
+ vqmmc-supply = <&vcc18_emmc>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&gmac2io {
|
||||
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
||||
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
|
||||
+ clock_in_out = "input";
|
||||
+ phy-supply = <&vcc_phy>;
|
||||
+ phy-mode = "rgmii";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&rgmiim1_pins>;
|
||||
+ snps,aal;
|
||||
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
+ snps,reset-active-low;
|
||||
+ snps,reset-delays-us = <0 10000 50000>;
|
||||
+ snps,rxpbl = <0x4>;
|
||||
+ snps,txpbl = <0x4>;
|
||||
+ tx_delay = <0x24>;
|
||||
+ rx_delay = <0x18>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmiphy {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi_sound {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c1 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ rk805: pmic@18 {
|
||||
+ compatible = "rockchip,rk805";
|
||||
+ reg = <0x18>;
|
||||
+ interrupt-parent = <&gpio1>;
|
||||
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ #clock-cells = <1>;
|
||||
+ clock-output-names = "xin32k", "rk805-clkout2";
|
||||
+ gpio-controller;
|
||||
+ #gpio-cells = <2>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pmic_int_l>;
|
||||
+ rockchip,system-power-controller;
|
||||
+ wakeup-source;
|
||||
+
|
||||
+ vcc1-supply = <&vcc_sys>;
|
||||
+ vcc2-supply = <&vcc_sys>;
|
||||
+ vcc3-supply = <&vcc_sys>;
|
||||
+ vcc4-supply = <&vcc_sys>;
|
||||
+ vcc5-supply = <&vcc_io>;
|
||||
+ vcc6-supply = <&vcc_io>;
|
||||
+
|
||||
+ regulators {
|
||||
+ vdd_logic: DCDC_REG1 {
|
||||
+ regulator-name = "vdd_logic";
|
||||
+ regulator-min-microvolt = <712500>;
|
||||
+ regulator-max-microvolt = <1450000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1000000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_arm: DCDC_REG2 {
|
||||
+ regulator-name = "vdd_arm";
|
||||
+ regulator-min-microvolt = <712500>;
|
||||
+ regulator-max-microvolt = <1450000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <950000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_ddr: DCDC_REG3 {
|
||||
+ regulator-name = "vcc_ddr";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_io: DCDC_REG4 {
|
||||
+ regulator-name = "vcc_io";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3300000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_18: LDO_REG1 {
|
||||
+ regulator-name = "vcc_18";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1800000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc18_emmc: LDO_REG2 {
|
||||
+ regulator-name = "vcc18_emmc";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1800000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_10: LDO_REG3 {
|
||||
+ regulator-name = "vdd_10";
|
||||
+ regulator-min-microvolt = <1000000>;
|
||||
+ regulator-max-microvolt = <1000000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1000000>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2s0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2s1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&io_domains {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ vccio1-supply = <&vcc_io>;
|
||||
+ vccio2-supply = <&vcc18_emmc>;
|
||||
+ vccio3-supply = <&vcc_sdio>;
|
||||
+ vccio4-supply = <&vcc_18>;
|
||||
+ vccio5-supply = <&vcc_io>;
|
||||
+ vccio6-supply = <&vcc_io>;
|
||||
+ pmuio-supply = <&vcc_io>;
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ pmic {
|
||||
+ pmic_int_l: pmic-int-l {
|
||||
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ usb2 {
|
||||
+ usb20_host_drv: usb20-host-drv {
|
||||
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&sdmmc {
|
||||
+ bus-width = <4>;
|
||||
+ cap-mmc-highspeed;
|
||||
+ cap-sd-highspeed;
|
||||
+ disable-wp;
|
||||
+ max-frequency = <150000000>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
|
||||
+ sd-uhs-sdr12;
|
||||
+ sd-uhs-sdr25;
|
||||
+ sd-uhs-sdr50;
|
||||
+ sd-uhs-sdr104;
|
||||
+ vmmc-supply = <&vcc_sd>;
|
||||
+ vqmmc-supply = <&vcc_sdio>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&tsadc {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&u2phy {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&u2phy_host {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&u2phy_otg {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb20_otg {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbdrd3 {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ehci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ohci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
--
|
||||
Created with Armbian build tools https://github.com/armbian/build
|
||||
|
||||
Loading…
Reference in New Issue
Block a user