From f1e0ade2e2fa6c8492ead4e5d370c2462f5eaaa8 Mon Sep 17 00:00:00 2001 From: Maxim Medvedev Date: Sun, 8 Dec 2024 15:03:23 +0100 Subject: [PATCH] mkspi: add U-Boot draft for MKSPI board copy of rk3328-roc-cc config and DTS files --- .../01-mkspi-rk3328-add-defconfig.patch | 126 ++++++ .../board_mkspi/02-mkspi-rk3328-add-dts.patch | 404 ++++++++++++++++++ 2 files changed, 530 insertions(+) create mode 100644 patch/u-boot/u-boot-rockchip64/board_mkspi/01-mkspi-rk3328-add-defconfig.patch create mode 100644 patch/u-boot/u-boot-rockchip64/board_mkspi/02-mkspi-rk3328-add-dts.patch diff --git a/patch/u-boot/u-boot-rockchip64/board_mkspi/01-mkspi-rk3328-add-defconfig.patch b/patch/u-boot/u-boot-rockchip64/board_mkspi/01-mkspi-rk3328-add-defconfig.patch new file mode 100644 index 0000000000..db9f6fed4a --- /dev/null +++ b/patch/u-boot/u-boot-rockchip64/board_mkspi/01-mkspi-rk3328-add-defconfig.patch @@ -0,0 +1,126 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Maxim Medvedev +Date: Sun, 8 Dec 2024 13:52:34 +0000 +Subject: feat: add U-Boot draft for MKSPI board +--- + configs/mkspi-rk3328_defconfig | 109 ++++++++++ + 1 file changed, 109 insertions(+) + +diff --git a/configs/mkspi-rk3328_defconfig b/configs/mkspi-rk3328_defconfig +new file mode 100755 +index 0000000000..1514ee63bb +--- /dev/null ++++ b/configs/mkspi-rk3328_defconfig +@@ -0,0 +1,109 @@ ++# Based on roc-cc-rk3328_defconfig ++CONFIG_ARM=y ++CONFIG_SKIP_LOWLEVEL_INIT=y ++CONFIG_COUNTER_FREQUENCY=24000000 ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_SYS_TEXT_BASE=0x00200000 ++CONFIG_SPL_GPIO=y ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_ENV_OFFSET=0x3F8000 ++CONFIG_DEFAULT_DEVICE_TREE="rk3328-roc-cc" ++CONFIG_ROCKCHIP_RK3328=y ++CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y ++CONFIG_TPL_LIBCOMMON_SUPPORT=y ++CONFIG_TPL_LIBGENERIC_SUPPORT=y ++CONFIG_SPL_DRIVERS_MISC=y ++CONFIG_SPL_STACK_R_ADDR=0x600000 ++CONFIG_DEBUG_UART_BASE=0xFF130000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SYS_LOAD_ADDR=0x800800 ++CONFIG_DEBUG_UART=y ++CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 ++# CONFIG_ANDROID_BOOT_IMAGE is not set ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_SPL_LOAD_FIT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-roc-cc.dtb" ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++CONFIG_MISC_INIT_R=y ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++CONFIG_TPL_SYS_MALLOC_SIMPLE=y ++CONFIG_SPL_STACK_R=y ++CONFIG_SPL_I2C=y ++CONFIG_SPL_POWER=y ++CONFIG_SPL_ATF=y ++CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y ++CONFIG_CMD_BOOTZ=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_USB_MASS_STORAGE=y ++# CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_TIME=y ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_TPL_OF_CONTROL=y ++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" ++CONFIG_TPL_OF_PLATDATA=y ++CONFIG_ENV_IS_IN_MMC=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_SYS_MMC_ENV_DEV=1 ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_TPL_DM=y ++CONFIG_REGMAP=y ++CONFIG_SPL_REGMAP=y ++CONFIG_TPL_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_SPL_SYSCON=y ++CONFIG_TPL_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SPL_CLK=y ++CONFIG_FASTBOOT_BUF_ADDR=0x800800 ++CONFIG_FASTBOOT_CMD_OEM_FORMAT=y ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_SF_DEFAULT_SPEED=20000000 ++CONFIG_PHY_REALTEK=y ++CONFIG_DM_ETH=y ++CONFIG_PHY_GIGE=y ++CONFIG_ETH_DESIGNWARE=y ++CONFIG_GMAC_ROCKCHIP=y ++CONFIG_PINCTRL=y ++CONFIG_SPL_PINCTRL=y ++CONFIG_DM_PMIC=y ++CONFIG_PMIC_RK8XX=y ++CONFIG_SPL_PMIC_RK8XX=y ++CONFIG_SPL_DM_REGULATOR=y ++CONFIG_REGULATOR_PWM=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_SPL_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_REGULATOR_RK8XX=y ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_RAM=y ++CONFIG_SPL_RAM=y ++CONFIG_TPL_RAM=y ++CONFIG_DM_RESET=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_SYSINFO=y ++CONFIG_SYSINFO_SMBIOS=y ++CONFIG_SYSRESET=y ++# CONFIG_TPL_SYSRESET is not set ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_DWC3=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_GENERIC=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_USB_OHCI_GENERIC=y ++CONFIG_USB_DWC2=y ++CONFIG_USB_DWC3=y ++# CONFIG_USB_DWC3_GADGET is not set ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_DWC2_OTG=y ++CONFIG_SPL_TINY_MEMSET=y ++CONFIG_TPL_TINY_MEMSET=y ++CONFIG_ERRNO_STR=y +-- +Created with Armbian build tools https://github.com/armbian/build + diff --git a/patch/u-boot/u-boot-rockchip64/board_mkspi/02-mkspi-rk3328-add-dts.patch b/patch/u-boot/u-boot-rockchip64/board_mkspi/02-mkspi-rk3328-add-dts.patch new file mode 100644 index 0000000000..0c6ac9f176 --- /dev/null +++ b/patch/u-boot/u-boot-rockchip64/board_mkspi/02-mkspi-rk3328-add-dts.patch @@ -0,0 +1,404 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Maxim Medvedev +Date: Sun, 8 Dec 2024 13:58:51 +0000 +Subject: add U-Boot draft for MKSPI board +--- + arch/arm/dts/rk3328-mkspi.dts | 387 ++++++++++ + 1 file changed, 387 insertions(+) + +diff --git a/arch/arm/dts/rk3328-mkspi.dts b/arch/arm/dts/rk3328-mkspi.dts +new file mode 100755 +index 0000000000..20ca255664 +--- /dev/null ++++ b/arch/arm/dts/rk3328-mkspi.dts +@@ -0,0 +1,387 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Based on rk3328-roc-cc.dts ++ * ++ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd ++ */ ++ ++/dts-v1/; ++#include "rk3328.dtsi" ++ ++/ { ++ model = "Firefly roc-rk3328-cc"; ++ compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; ++ ++ aliases { ++ mmc0 = &sdmmc; ++ mmc1 = &emmc; ++ }; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ gmac_clkin: external-gmac-clock { ++ compatible = "fixed-clock"; ++ clock-frequency = <125000000>; ++ clock-output-names = "gmac_clkin"; ++ #clock-cells = <0>; ++ }; ++ ++ dc_12v: dc-12v { ++ compatible = "regulator-fixed"; ++ regulator-name = "dc_12v"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <12000000>; ++ regulator-max-microvolt = <12000000>; ++ }; ++ ++ vcc_sd: sdmmc-regulator { ++ compatible = "regulator-fixed"; ++ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0m1_pin>; ++ regulator-boot-on; ++ regulator-name = "vcc_sd"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc_io>; ++ }; ++ ++ vcc_sdio: sdmmcio-regulator { ++ compatible = "regulator-gpio"; ++ gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>; ++ states = <1800000 0x1>, ++ <3300000 0x0>; ++ regulator-name = "vcc_sdio"; ++ regulator-type = "voltage"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ vin-supply = <&vcc_sys>; ++ }; ++ ++ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb20_host_drv>; ++ regulator-name = "vcc_host1_5v"; ++ regulator-always-on; ++ vin-supply = <&vcc_sys>; ++ }; ++ ++ vcc_sys: vcc-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&dc_12v>; ++ }; ++ ++ vcc_phy: vcc-phy-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_phy"; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ power_led: led-0 { ++ label = "firefly:blue:power"; ++ linux,default-trigger = "heartbeat"; ++ gpios = <&rk805 1 GPIO_ACTIVE_LOW>; ++ default-state = "on"; ++ mode = <0x23>; ++ }; ++ ++ user_led: led-1 { ++ label = "firefly:yellow:user"; ++ linux,default-trigger = "mmc1"; ++ gpios = <&rk805 0 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ mode = <0x05>; ++ }; ++ }; ++}; ++ ++&analog_sound { ++ status = "okay"; ++}; ++ ++&codec { ++ status = "okay"; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu2 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu3 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&emmc { ++ bus-width = <8>; ++ cap-mmc-highspeed; ++ max-frequency = <150000000>; ++ mmc-ddr-1_8v; ++ mmc-hs200-1_8v; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; ++ vmmc-supply = <&vcc_io>; ++ vqmmc-supply = <&vcc18_emmc>; ++ status = "okay"; ++}; ++ ++&gmac2io { ++ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; ++ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; ++ clock_in_out = "input"; ++ phy-supply = <&vcc_phy>; ++ phy-mode = "rgmii"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rgmiim1_pins>; ++ snps,aal; ++ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; ++ snps,reset-active-low; ++ snps,reset-delays-us = <0 10000 50000>; ++ snps,rxpbl = <0x4>; ++ snps,txpbl = <0x4>; ++ tx_delay = <0x24>; ++ rx_delay = <0x18>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ status = "okay"; ++}; ++ ++&hdmiphy { ++ status = "okay"; ++}; ++ ++&hdmi_sound { ++ status = "okay"; ++}; ++ ++&i2c1 { ++ status = "okay"; ++ ++ rk805: pmic@18 { ++ compatible = "rockchip,rk805"; ++ reg = <0x18>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <24 IRQ_TYPE_LEVEL_LOW>; ++ #clock-cells = <1>; ++ clock-output-names = "xin32k", "rk805-clkout2"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l>; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc_sys>; ++ vcc2-supply = <&vcc_sys>; ++ vcc3-supply = <&vcc_sys>; ++ vcc4-supply = <&vcc_sys>; ++ vcc5-supply = <&vcc_io>; ++ vcc6-supply = <&vcc_io>; ++ ++ regulators { ++ vdd_logic: DCDC_REG1 { ++ regulator-name = "vdd_logic"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1450000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1000000>; ++ }; ++ }; ++ ++ vdd_arm: DCDC_REG2 { ++ regulator-name = "vdd_arm"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1450000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <950000>; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_io: DCDC_REG4 { ++ regulator-name = "vcc_io"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vcc_18: LDO_REG1 { ++ regulator-name = "vcc_18"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc18_emmc: LDO_REG2 { ++ regulator-name = "vcc18_emmc"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vdd_10: LDO_REG3 { ++ regulator-name = "vdd_10"; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1000000>; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2s0 { ++ status = "okay"; ++}; ++ ++&i2s1 { ++ status = "okay"; ++}; ++ ++&io_domains { ++ status = "okay"; ++ ++ vccio1-supply = <&vcc_io>; ++ vccio2-supply = <&vcc18_emmc>; ++ vccio3-supply = <&vcc_sdio>; ++ vccio4-supply = <&vcc_18>; ++ vccio5-supply = <&vcc_io>; ++ vccio6-supply = <&vcc_io>; ++ pmuio-supply = <&vcc_io>; ++}; ++ ++&pinctrl { ++ pmic { ++ pmic_int_l: pmic-int-l { ++ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ usb2 { ++ usb20_host_drv: usb20-host-drv { ++ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-mmc-highspeed; ++ cap-sd-highspeed; ++ disable-wp; ++ max-frequency = <150000000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; ++ sd-uhs-sdr12; ++ sd-uhs-sdr25; ++ sd-uhs-sdr50; ++ sd-uhs-sdr104; ++ vmmc-supply = <&vcc_sd>; ++ vqmmc-supply = <&vcc_sdio>; ++ status = "okay"; ++}; ++ ++&tsadc { ++ status = "okay"; ++}; ++ ++&u2phy { ++ status = "okay"; ++}; ++ ++&u2phy_host { ++ status = "okay"; ++}; ++ ++&u2phy_otg { ++ status = "okay"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb20_otg { ++ dr_mode = "host"; ++ status = "okay"; ++}; ++ ++&usbdrd3 { ++ dr_mode = "host"; ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&vop { ++ status = "okay"; ++}; ++ ++&vop_mmu { ++ status = "okay"; ++}; +-- +Created with Armbian build tools https://github.com/armbian/build +