* sunxi-6.1: rebase to v6.1.14, reexport patches megous
* sunxi-6.1: rename fixes patches
* sunxi-6.1: reexport armbian patches
* sunxi-6.1: fix the series.conf file to the current state
* sunxi-6.1: switch edge to v6.1.14
* Adjust sunxi to 5.15 / 6.1 / 6.2
- change configs
- adjust broken patches
- disable patch that only changes /readme.md and it has issues
---------
Co-authored-by: Igor Pečovnik <igor@armbian.com>
- `risc-v`: rework RichNeese's boards, reduce families, move tweaks to boards
- `risc-v`/`starfive`: `CONFIG_MOTORCOMM_PHY=m` for the onboard Ethernet
- `risc-v`/`starfive`: use mainline kernel 6.1.y, with StarFive's rebased patches against `v6.1.5`
- from https://github.com/starfive-tech/linux/commits/visionfive
- contention point: `1022-soc-sifive-ccache-Add-StarFive-JH71x0-support.patch` which I merged half-assed, need review/fixes?
- `risc-v`/`starfive`: update kernel config, sans changes
- `risc-v`/`starfive`: switch from `grub` to `extlinux`
- `risc-v`/`starfive`: new `starfive` family with their (vendor) kernel
Co-authored-by: Richard Neese <r.neese@gmail.com>
add support for various HID game controllers and waydroid on rk3588 legacy kernel
Co-authored-by: monkaBlyat <54044929+monkaBlyat@users.noreply.github.com>
* Add some Wireless modules to RK3588 legacy kernel
* Add some Wireless modules to RK3588 legacy kernel
* Add some Wireless modules to RK3588 legacy kernel
This is already enabled in the rockchip family on edge and per the discussion
here: https://forum.armbian.com/topic/20018-mglru-patches-to-bring-down-kswapd-cpu-usage
I would like to enable it on meson64-edge. And if that goes smoothly,
I will followup with a PR to enable it on meson64-current also since that is
now on 6.1.
Changes to be committed:
modified: config/kernel/linux-meson64-edge.config
* Initial work on bringing mvebu to 6.0
* Switch mvebu edge to 6.1
* Remove link leftover
* Update kernel config
Co-authored-by: Igor <igor@armbian.com>
* `orangepi5.wip`: initial OrangePi5 support
- OPi5's Xunlong vendor u-boot; override family in board hook
- using original config from vendor, needs `BOOT_SOC`
- OPi5's kernel patches, all extracted from Xunlong's tree
- Only enable the DT patch and the Motorcomm PHY patch
- Other stuff that looks might be useful is grouped in a few other disabled patches
- Most panel/overlays/etc from Xunlong tree not included
- everything is on top of existing `rockchip-rk3588` family,
- thus the same crazy half-android rk kernel tree and ancient rk u-boot
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* `linux-rockchip-rk3588-legacy`: `.config` updated to 5.10.110; no actual changes
- prepare for merging Xunlong config
* `linux-rockchip-rk3588-legacy`: `.config` Xunlong config, manually merged; preserved previous PR's
- preserved previous PR's changes:
- 1fdbab346a
- bf3b8a8fb7
- 7a3ad3afb2
- f1952f97f4
- ab70cb247f
- 62adba7825
- ba10622c32
- cd4da2a77b
- 7b3325c95e
- b4945d973c
- a8473e8143
* `linux-rockchip-rk3588-legacy`: `.config` re-updated to 5.10.110 after Xunlong changes
* OPi5: `rockchip-rk3588-legacy`: add patch to remove chosen > bootargs from `rk3588-linux.dtsi`
* Opi5: add build targets (by Igor)
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Igor <igor@armbian.com>
config doesn't include rtl8822cs (which apparently some TV boxes use).
This is enabled in most kernel configs:
linux-bcm2711-current.config:CONFIG_RTL8822CS=m
linux-bcm2711-edge.config:CONFIG_RTL8822CS=m
linux-imx6-current.config:CONFIG_RTL8822CS=m
linux-imx6-edge.config:CONFIG_RTL8822CS=m
linux-media-current.config:CONFIG_RTL8822CS=m
linux-media-edge.config:CONFIG_RTL8822CS=m
linux-media-legacy.config:# CONFIG_RTL8822CS is not set
linux-meson64-current.config:CONFIG_RTL8822CS=m
linux-meson64-edge.config:# CONFIG_RTL8822CS is not set
linux-mvebu64-current.config:CONFIG_RTL8822CS=m
linux-mvebu64-edge.config:CONFIG_RTL8822CS=m
linux-mvebu-current.config:CONFIG_RTL8822CS=m
linux-mvebu-edge.config:CONFIG_RTL8822CS=m
linux-odroidxu4-edge.config:CONFIG_RTL8822CS=m
linux-rk322x-current.config:CONFIG_RTL8822CS=m
linux-rk322x-edge.config:CONFIG_RTL8822CS=m
linux-rockchip64-current.config:CONFIG_RTL8822CS=m
linux-rockchip64-edge.config:CONFIG_RTL8822CS=m
linux-rockchip-current.config:CONFIG_RTL8822CS=m
linux-rockchip-edge.config:# CONFIG_RTL8822CS is not set
linux-rockchip-rk3588-legacy.config:# CONFIG_RTL8822CS is not set
linux-sunxi64-current.config:CONFIG_RTL8822CS=m
linux-sunxi64-edge.config:CONFIG_RTL8822CS=m
linux-sunxi64-legacy.config:CONFIG_RTL8822CS=m
linux-sunxi-current.config:CONFIG_RTL8822CS=m
linux-sunxi-edge.config:CONFIG_RTL8822CS=m
linux-sunxi-legacy.config:CONFIG_RTL8822CS=m
linux-uefi-arm64-current.config:CONFIG_RTL8822CS=m
linux-uefi-arm64-edge.config:# CONFIG_RTL8822CS is not set
linux-uefi-riscv64-current.config:# CONFIG_RTL8822CS is not set
linux-uefi-riscv64-edge.config:# CONFIG_RTL8822CS is not set
linux-uefi-x86-current.config:CONFIG_RTL8822CS=m
linux-uefi-x86-edge.config:CONFIG_RTL8822CS=m
This commit enables this for just the meson64-edge kernel as that resolves the
issue I was researching, but I suspect it probably should also be enabled for
rockchip-edge as well, but I don't have any such devices.
On branch rtl8822cs_meson64_edge
Changes to be committed:
modified: ../kernel/linux-meson64-edge.config
* Enable CONFIG_BPF_SYSCALL which might improve Docker support
* Adjust board names
* Move neo3 to previous bootloader too
* Disable 3d support on rock64
* Add initial RISCV support
* Add UEFI edge and current kernel configs
* Cleanup and adjust packages
* Those files were in wrong path
* Fix locations
* Ubuntu images built
* Remove Debian support as its too fragile
* Remove Pinta as it doesn't work under riscv
* Limitation is only for building images
* Remove obsolete switch
* Cleanup major arch config files
* Support for Docker building
* `odroidm1`.wip: hk's `legacy`= 4.19 and `edge`= mainline+tobetter's 5.19 rebased; *requires* `skip_spiboot=true`
- @TODO: family/etc naming is terrible with vendor kernels. Sorry. Fight over it and let me know?
- @TODO: config is very probably incomplete.
- new `boot-rockchip64-vendor.cmd`:
- does not use fixed load_addr, instead use ramdisk_addr_r for everything
- load kernel and initrd as late as possible
- look for overlays twice:
- once: with prefix and folder
- twice: without prefix, nor folder; helps with vendor provided overlays like hk's and tobetter's
- wip: edge: tobetter's patchset rebased against 5.19.3
- wip: edge: bump to tobetter's 5.19
- legacy: .config `CONFIG_ARM64_VA_BITS_48=y`
- wip m1: update legacy config from odroid
- odroidm1: container/bpf stuff in legacy config
* Update configs and enable beta build target
* Adjust current kernel
* Update targets
* Remove everything but EDGE kernel
* Cleanup
* Fix
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* sunxi-6.0: initial state: add megous patches to series
* sunxi-6.0: Switch to v6.0.1
* wifi: Limit the version 6.0 for Realtek 88x2cs chipsets
* Adjust kernel configs
* Remove not needed patches
* Adjust broken patches
Co-authored-by: Igor <igor@armbian.com>
* Remove deprecated Odroid XU4 legacy 4.14.y branch
* Clean deprecated kernels from meson64 family
- legacy kernel 4.9 was removed
- current 5.10 was replaced with 5.19
- edge remains on 5.19 until someone bumps it to 6
- patches between 5.11 and 5.18 were removed, 5.10 will be kept for awhile
* Update configs
* Add ssv6051p wifi driver for rockchip64 current and edge kernel
* also reorders and tidies device tree overlays for rk3318-box
* increase ssv6051 sdio bus to 50MHz in the driver
* meson: bump version
bump edge to thirdparty linux-5.18-rc7
bump current to linux-5.15
change legacy back to LTS linux-5.10
* Upgrade kernel config
* meson: edge and current: Enable NTFS3 driver
* sunxi-5.19: Initial state for megous patches
* Add the ability to do 5.19
* Move to 5.19
- tested both
- removed broken Opi Zero xradio driver https://armbian.atlassian.net/browse/AR-1280
* sunxi-5.19: fix tag for switch
* sunxi-5.19: Initial state for armbian patches
* sunxi-5.19: Add armbian patches to series.conf file
* sanxi-5.19: Add other 2 patches
* sunxi-5.19: Limit to use the 'wireless/xradio' module
Limit the kernel version to less than 5.19 to use
the 'wireless/xradio' module
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* meson64-edge/5.19: use `tag:v5.19-rc2`, meson64 kernel config and kernel patches, by @adeepv
* meson64-edge/5.19: we don't need `CONFIG_ARCH_ROCKCHIP=y` for meson64, right?
* meson64-edge/5.19: remove `meson_drv_shutdown` revert patch, instead `CONFIG_DRM_MESON=y` and its dependencies in .config
- this allows other meson64's to shutdown properly, while allowing the N2(+) to reboot without kernel-side hangs
* meson64-edge/5.19: odroidn2(+): remove SD UHS modes patch for ODROID N2(+)
- it works when cold-booted
- but changes voltage to enable
- when rebooted, voltage persists and uboot can't read the SD anymore
- adding the "odroid,reboot" driver+dt that is supposed to fix this, doesn't
- so for now remove it
* meson64-edge/5.19: odroidn2(+): add dumb gpio fan at 30 celsius
- backport from rework in 5.10
* meson64-edge/5.19: odroidhc4: bring back `fan1_input` by adding fan details to DT
- yeah, I know; the cooling map is right there too, so empty, poor thing. for later.
* meson64-edge/5.19: bump to 5.19-rc3
* meson64-edge/5.19: radxa-zero: add patch to remove UHS mode so `wifi` works
- sent by @pyavitz: https://raw.githubusercontent.com/pyavitz/debian-image-builder/feature/patches/amlogic/radxazero/wifi/001-arm64-dts-amlogic-radxa-zero-sdio-card-speed.patch
- tested by @lanefu
* meson64-edge/5.19: bump to 5.19-rc4
* meson64-edge/5.19: bump to 5.19-rc5
* meson64-edge/5.19: bump to 5.19-rc7
* meson64-edge/5.19: bump to 5.19.y branch, which is 5.19.0 right now
* Add kernel config - tested on Odroid N2+
Co-authored-by: Vyacheslav Bocharov <adeep@lexina.in>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* rock-5b: add initial raxda rock-5b .wip (by @amazingfate); vendor u-boot & kernel
- .wip board
- using BOARDFAMILY `rk35xx`, which was for rock-3a
- patch by @piter75 uboot for working 'source' command so boot.scr can be used, and not extlinux
- .config: hammer CONFIG_JOYSTICK_XPAD & CONFIG_JOYSTICK_PSXPAD_SPI
- rock5 add kernel optiions by @lanefu
- disable CONFIG_LOCALVERSION_AUTO otherwise packaging goes insane
- make its kernel is own LINUXFAMILY to as to not mess up rock-3a
- CONFIG_VT=y & SKIP_BOOTSPLASH="yes"
* Add separate family for rock 5b - rockchip-rk3588
Co-authored-by: amazingfate <liujianfeng1994@gmail.com>
Co-authored-by: root <catalinii@yahoo.com>
* Update linux-sunxi64-current.config
anbox-modules needs kprobes
https://github.com/armbian/build/issues/3883
* Enable this everywhere
sed -i -- 's/# CONFIG_KPROBES is not set/CONFIG_KPROBES=y/g' *.config
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Refactor patches
* Fix bug: the USB closed to the HDMI doesn't work
* Fix bug: cpufreq doesn't work
* Fix bug: thermal_zone doesn't work
* More frequency governors
* Add bootscript
* Fix bug: add missing dependency
needed for gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf
* Update kernel configs
* Switch sunxi edge to 5.18.y
* Move sunxi to 5.18.y and re-enable AUFS
* Change version - temporally to make a build from here
* Update config
* 88xx was fixed in the mean time.
* Put version back
* Fix sunxi legacy, disable aufs on 5.10.y since its broken
* Upstream changed in the mean time
* Add a patch to enable 8821cu compilation at 5.18
https://github.com/armbian/build/pull/3814
* Re-enable CONFIG_RTL8822BU in edge
* Update CONFIG_RTL8XXXU
* Bump imx6
* Bump uefi kernels to 5.18.y
* Bump mvebu64 and switch odroid xu4 to 5.18
* tf-a sources use mrvl_flash rather than 'all' target
* add armada 8k ethernet and SFP cages for macchiatobin use
* u-boot configuration for mcbin
* fix bootscript for u-boot variables
* separate ebin and mcbin with if statements
* add a8k PCIe and CPUFreq drivers for macchiatobin
* rk322x: add support for ssv6030p (disguise it as ssv6051p)
* rk322x: enable BPF filters and ancillary options, remove ssv6030 patches
* rk322x: enable BPF filters for edge 5.17 kernel
