Commit Graph

13886 Commits

Author SHA1 Message Date
ColorfulRhino
f25fc42e1e wifi: rtl8852bs: Add some comments 2024-07-11 09:55:16 +08:00
amazingfate
9381edb69d wifi: rtl8852bs: fix build for rockchip 2024-07-11 09:55:16 +08:00
Ricardo Pardini
f5a9fc2d92 nanopi-r5s: u-boot: pci enum in preboot; disable armbian-led-state
- pci enum in preboot; required for working m.2 when booting some older kernels
- this board has an overlay (DEFAULT_OVERLAYS="nanopi-r5s-leds") to drive the LEDs, disable armbian-led-state service
2024-07-10 12:46:54 +02:00
ColorfulRhino
de030c7e32 mt7623: Enable various Mediatek-related kernel config options
This enabled more Mediatek drivers for potential better support for the mt7623 SoC.
2024-07-09 18:04:21 +03:00
ColorfulRhino
28233a01c9 mt7623: Bump U-Boot to 2024.07
- Move uboot patch dir to v2024.07 since the `legacy` folder is only for vendor or very old uboots.
2024-07-09 18:04:21 +03:00
ColorfulRhino
c109943205 mt7623: current: Rewrite kernel config 2024-07-09 18:04:21 +03:00
ColorfulRhino
0e0656125d mt7623: Bump legacy 4.19 to current 6.6 kernel
NB: This family only has one board (BananaPi R2) and has not been properly maintained in many years, so 'current' LTS kernel is enough.
No need for 'edge' kernel unless someone plans to step in as maintainer who bumps and tests it on every new kernel release.

- Adjust BananaPi R2 board config (board is mainlined)
- Remove legacy kernel patch folder and kernel config
- Remove unstable WiFi stuff
2024-07-09 18:04:21 +03:00
Lemon
41aa99e657
To modify the PWM-fan temperature control policy of fine3399 to adjust the fan speed to a lower level (#6843)
* To modify the PWM-fan temperature control policy of fine3399 to adjust the fan speed to a lower level
* Integrating support for xiaobaonas boards into the rockchip64-6.9 kernel
2024-07-09 11:33:35 +02:00
The-going
7a054c6286 sunxi-6.1: Add missing GPU trip point 2024-07-09 11:32:22 +02:00
The-going
11d11cf747 sunxi-6.1: Turn on poorly designed patches again.
Poorly designed patches result in the maintainer
having to do extra work.
2024-07-09 11:32:22 +02:00
The-going
75317a0778 sunxi-6.1: Revert: handle entropy from atomic process context
Revert 07b37f227c8daa27e68f57b1c691fab34a06731e commit
For the sunxi (armhf) architecture, this commit results in
an inability to load the kernel. It's actually a crutch
that can break everything tomorrow.
Therefore, freeze the kernel version for better times.
2024-07-09 11:32:22 +02:00
The-going
2d7cbfa7c1 sunxi-6.1: switch to tag:v6.1.97, re-extracting the corrected ones
Fix: dtb dtbo install, wrong select media sensors

Disable incorrectly designed patches.
They need to be aligned with the kernel code.
2024-07-09 11:32:22 +02:00
ColorfulRhino
d638276fcc partitioning: Reduce commit mount option for btrfs and ext4 to 120
Mount option `commit=600` (=10 minutes) seems pretty high.
Reduce it to 120 for ext4 (default for ext4 is `commit=5`)
and 120 for btrfs (default for btrfs is `commit=30`) to reduce
risk of losing data on power loss.

Sources:
- https://www.kernel.org/doc/html/latest/admin-guide/ext4.html
- https://wiki.archlinux.org/title/Btrfs#Commit_interval
- https://btrfs.readthedocs.io/en/latest/Administration.html
2024-07-09 11:31:51 +02:00
dependabot[bot]
718aa52b17 build(deps): bump actions/upload-artifact from 4.3.3 to 4.3.4
Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 4.3.3 to 4.3.4.
- [Release notes](https://github.com/actions/upload-artifact/releases)
- [Commits](65462800fd...0b2256b8c0)

---
updated-dependencies:
- dependency-name: actions/upload-artifact
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2024-07-09 06:19:56 +02:00
Igor Pecovnik
1f18f0ca28 Trixie: remove / replace missing packages 2024-07-09 06:19:27 +02:00
Ricardo Pardini
37279605ac mekotronics: u-boot: join rockchip-rk3588's default u-boot-radxa-rk35xx scheme
- rebased 2 patches
- moved null patches for dts & defconfigs to `dt` / `defconfig` dirs
- rename defconfigs since we're at it; use board-specific only
- defconfigs re-saved
2024-07-09 06:18:00 +02:00
ColorfulRhino
c84703d3b4 nanopi-r6s: Use mainline U-Boot
The same configuration has been working fine for the similar NanoPi R6C for a while. Users have reported issues with the vendor U-Boot not able to boot.

Ref: https://forum.armbian.com/topic/42105-report-bug-in-nanopi-r6s/
2024-07-08 18:02:22 +02:00
Ricardo Pardini
0347745a34 mixtile-blade3: u-boot: join rockchip-rk3588's default u-boot-radxa-rk35xx scheme
- rebased 3 patches
- moved null patches for dts & defconfigs to `dt` / `defconfig` dirs
- don't rename defconfigs: those are shared with Joshua Riek (ubuntu-rockchip)
- defconfigs re-saved
2024-07-08 17:01:17 +02:00
Ricardo Pardini
8f6cd263d6 thinkpad-x13s: bump to jhovold's wip/sc8280xp-6.10-rc6; add fprintd back to Trixie; fixes
- adapt according to most recent instructions from jhovold:
  - https://github.com/jhovold/linux/wiki/X13s
  - 993ae484d1
2024-07-08 17:01:01 +02:00
ColorfulRhino
39fdf21b98
Beautify shellfmt and add board configs to formatting list (#6910)
* tools: shellfmt: Beautify and add board configs to formatting list
* Format the whole code using `lib/tools/shellfmt.sh`
---------
Co-authored-by: Igor <igor@armbian.com>
2024-07-08 17:00:38 +02:00
Ricardo Pardini
9e5b8592c9 multiple boards: bump u-boot from v2024.07-rcX to v2024.07 final
- after this, all patches were rewritten, but zero changes. success!
2024-07-08 16:55:47 +02:00
Ricardo Pardini
bb8ff7b607 jethubj200: rewrite u-boot patches against v2024.07 final 2024-07-08 16:55:47 +02:00
Ricardo Pardini
f60b3bbfe2 rk3318-box: rewrite u-boot patches against v2024.07-rc5 2024-07-08 16:55:47 +02:00
Ricardo Pardini
07084b64b7 rk322x-box: rewrite u-boot patches against v2024.07-rc5 2024-07-08 16:55:47 +02:00
ColorfulRhino
d399fb9b7f config: distros: Add armhf to Debian Trixie 2024-07-08 16:54:36 +02:00
ColorfulRhino
61fe4bcdda config: distros: Make architecture listing consistent 2024-07-08 16:54:36 +02:00
ColorfulRhino
8056532684 cli: main-config: Move NETWORKING_STACK config after family config
This allows family configs to change the networking stack.
2024-07-08 16:54:36 +02:00
Paolo Sabatino
02e0c14a8a remove rk3288 unused boot binary blob 2024-07-08 13:02:15 +02:00
Paolo Sabatino
89c1411a65 overwrite UBOOT_TARGET_MAP in board conf 2024-07-08 13:02:15 +02:00
Paolo Sabatino
b5c500481d rebase patches with rewrite-uboot-patches 2024-07-08 13:02:15 +02:00
ColorfulRhino
5bb665f965 cli: uboot: Remove HOME workaround for old tinkerboard/xt-q8l-v10 U-Boot
This temporary workaround was only needed for tinkerboard and xt-q8l-v10 version 2022.04 U-Boot. The version has since bumped to 2024.07 and builds fine without this.
2024-07-08 13:02:15 +02:00
Paolo Sabatino
87b90295ea bump rk3288 tinkerboard to uboot v2024.07
* also bump:
 * rk3288 xt-q8l-v10 target
 * rk322x-box target (was already v2024.07-rc5)
 * rk3318-box target (was already v2024.07-rc5)
2024-07-08 13:02:15 +02:00
Ricardo Pardini
ab1e97c069 odroidm1: don't copy paste without changing the function name
Co-authored-by: ColorfulRhino <131405023+ColorfulRhino@users.noreply.github.com>
2024-07-07 17:46:47 +02:00
Ricardo Pardini
268c2e8596 odroidm1: bump to u-boot v2024.07; replace defconfig patches with hook
- bump "armbian" env to reset env in SPI on first run
2024-07-07 17:46:47 +02:00
Ricardo Pardini
4232661c37 u-boot: embed armbian artifact version in CONFIG_LOCALVERSION
- we're hacking at it anyway, so why not use it to uniquely identify the exact build
2024-07-07 13:06:56 +02:00
Igor Pecovnik
3f5d086108 Bananapi M5: Bump u-boot to v2024.07 final 2024-07-07 08:11:47 +02:00
amazingfate
4919e52fea add new board radxa-e52c 2024-07-07 00:51:49 +08:00
Igor Pecovnik
1f5827612e Allwinner: set legacy 6.1.y to last known build tag 2024-07-05 18:59:18 +02:00
Patrick Yavitz
952e680d00 RTW88: 6.6: upstream wireless: fixups
wifi: rtw88: coex: Prevent doing I/O during Wi-Fi power saving
https://patchwork.kernel.org/project/linux-wireless/patch/20240320075047.31810-1-pkshih@realtek.com/

wifi: rtw88: station mode only for SDIO chips
https://patchwork.kernel.org/project/linux-wireless/patch/20240327004155.7172-1-pkshih@realtek.com/

 wifi: rtw88: Set default CQM config if not present
https://lore.kernel.org/all/20240401033019.9664-1-pkshih@realtek.com/

wifi: rtw88: usb: Simplify rtw_usb_write_data
https://patchwork.kernel.org/project/linux-wireless/patch/2479507e-3946-492f-857e-83e54969aad2@gmail.com/#25836118

wifi: rtw88: usb: Fix disconnection after beacon loss
https://patchwork.kernel.org/project/linux-wireless/patch/ecbf0601-810d-4609-b8fc-8b0e38d2948d@gmail.com/

wifi: rtw88: usb: Further limit the TX aggregation
https://patchwork.kernel.org/project/linux-wireless/patch/cb46ea35-7e59-4742-9c1f-01ceeaad36fb@gmail.com/

wifi: rtw88: schedule rx work after everything is set up
https://lore.kernel.org/lkml/96a46df7c4c49b2b033bc7cd8d5cad3306db8ca6.camel@realtek.com/T/

Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
2024-07-05 12:36:45 -04:00
Igor Pecovnik
f696f6d182 Adjust Rockpi S patch to align with upstream changes 2024-07-05 14:25:51 +02:00
Viacheslav Bocharov
c27c55b0bc Fix trap-logging to CI ant not GITHUB_ACTIONS
Signed-off-by: Viacheslav Bocharov <adeep@lexina.in>
2024-07-04 21:35:26 +02:00
Viacheslav Bocharov
d73c4cefab Fix check CI && GITHUB_ACTIONS for GITHUB_OUTPUT to only GITHUB_ACTIONS
Signed-off-by: Viacheslav Bocharov <adeep@lexina.in>
2024-07-04 21:35:26 +02:00
Viacheslav Bocharov
7875fce1e9 Allow to pass docker login credentials to oras-cli for and CI environment
Signed-off-by: Viacheslav Bocharov <adeep@lexina.in>
2024-07-04 21:35:26 +02:00
Igor Pecovnik
a2f9e1f1e5 Add a big warning and additional check when wiping target destination 2024-07-04 21:35:12 +02:00
Igor Pecovnik
26867787e5 Armbian-install: add option to wipe target destination 2024-07-04 21:35:12 +02:00
ColorfulRhino
823c03ca26 rockpi-s: Remove legacy kernel 4.4 support
The legacy U-Boot can't be built anymore and 4.4 is EOL.
2024-07-04 21:34:56 +02:00
ColorfulRhino
0bc5d27701
rk35xx: Remove legacy kernel target from board configs (#6881)
Deprecate `legacy`, but only remove from board configs for now.
Print a warning, the whole branch is slated for removal.
2024-07-04 21:34:41 +02:00
Muhammed Efe Cetin
ee62433116 Move OPi5 Plus uboot to Radxa git tree 2024-07-04 21:29:44 +02:00
Muhammed Efe Cetin
35f6fd3238 Move OPi5/5B uboot to Radxa git tree 2024-07-04 21:29:44 +02:00
Ricardo Pardini
fbc60310c6 mekotronics: rk3588: u-boot: borrow patch to fix build on newer gcc 2024-07-04 19:44:55 +02:00