- move FIP signing code from meson-sm1.conf's `uboot_custom_postprocess()` to the board's own `post_uboot_custom_postprocess` hook
- fetch a secondary FIP blob repo at a revision with working FIP blobs for SPI (see https://github.com/LibreELEC/amlogic-boot-fip/pull/10)
- implement `post_uboot_custom_postprocess__khadas_vim3l_uboot_new_and_old_blobs()` doing a dance for SD/eMMC with new blobs, and SPI with old blobs.
- move FIP signing code from meson-g12b.conf's `uboot_custom_postprocess()` to the board's own `post_uboot_custom_postprocess` hook
- fetch a secondary FIP blob repo at a revision with working FIP blobs for SPI (see https://github.com/LibreELEC/amlogic-boot-fip/pull/10)
- implement `post_uboot_custom_postprocess__khadas_vim3_uboot_new_and_old_blobs()` doing a dance for SD/eMMC with new blobs, and SPI with old blobs.
- introduce hooks `grub_early_config`, `grub_pre_install` and `grub_late_config`
- what we see here is an extension that itself has hooks, that just works
- introduce extension `grub-with-dtb`, which
- enables `grub` extension
- requires `BOOT_FDT_FILE` to be set
- includes `/etc/armbian-grub-with-dtb` with `BOOT_FDT_FILE=` in the bsp-cli
- includes `/etc/kernel/postinst.d/armbian-grub-with-dtb` in the bsp-cli
- which reads the above and creates links for `/boot/armbian-dtb-<version>` when deploying deb's
- adds implementations of the hooks above to
- replace the distro's `10_linux` with our own `09_linux_with_dtb`
- which looks for `/boot/armbian-dtb-<version>`
- forcibly run `/etc/kernel/postinst.d/armbian-grub-with-dtb` during image build, since bsp-cli is installed after linux-image
- uefi-arm64: enable GRUB wallpaper by setting `UEFI_GRUB_TERMINAL=gfxterm`
- force GRUB_FONT so Ubuntu is not confused and gfxterm (incl wallpaper) finally works
- add `GRUB_CMDLINE_LINUX_DEFAULT` with `efi=noruntime clk_ignore_unused pd_ignore_unused` so it actually boots
- use `grub-with-dtb` for the (required) DTB usage in grub
- use a customize hook to add a lot of modules & fw into initrd, required for booting
- if on RELEASE=lunar, add Ubuntu's "x13s Concept" PPA and a few packages for battery control/audio
This brings the patch set up to 2023-06-22 wireless-next
Drivers tested;
8822CS. 8821CU and 8723DS
Notables;
Not seeing random dmesg spam `rtw_8822cs failed to get tx report from firmware` which I would see on both the CS and CU from time to time.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
For combo chips, antennas were controlled by bluetooth only during power on. If WiFi wish to do transmission, notification to the coexistence module are required. Previously we only do this before authentication. To allow transmission before auth, such as management TX, now we start the initiation of coexistence earlier so antennas are shared between WiFi and bluetooth after set_channel(), and frames could then be sent.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
