- `2023.04` fails during USB init, thus using 23.01 (23.07 untested)
- `blobless` with newer 2.8.5 ATF
- the previous problems with PCIe are _not_ totally solved by this
Use multiple consecutive reads in rtw_sdio_read_port() to limit the number of bytes which are copied by the host from the card in one MMC/SDIO transfer. This allows receiving a buffer that's larger than the hosts max_req_size (number of bytes which can be transferred in one MMC/SDIO transfer). As a result of this the skb_over_panic error is gone as the rtw88 driver is now able to receive more than 1536 bytes from the card (either because the incoming packet is larger than that or because multiple packets have been aggregated).
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
- meko: don't use Radxa's Rock-5A u-boot anymore, switch to rockchip vendor next-dev branch
- meko: my own (horrible) patches for MAC address stability / defconfig
- meko: cherry picked a few patches for getting rid of BL32/read Bl31 from env and other fixes from Radxa
- meko: add OTP node to 3588 dtsi (so we don't need kern-dtb in ITS for working OTP)
- meko: refactor common code across 3 (soon to be 4) board files into vendor conf and hooks
- meko: bump DDR/BL31 blobs for all Meko boards
This brings the patch set up to 2023-06-22 wireless-next
Drivers tested;
8822CS. 8821CU and 8723DS
Notables;
Not seeing random dmesg spam `rtw_8822cs failed to get tx report from firmware` which I would see on both the CS and CU from time to time.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
For combo chips, antennas were controlled by bluetooth only during power on. If WiFi wish to do transmission, notification to the coexistence module are required. Previously we only do this before authentication. To allow transmission before auth, such as management TX, now we start the initiation of coexistence earlier so antennas are shared between WiFi and bluetooth after set_channel(), and frames could then be sent.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Linux 6.1.34 / 6.3.8
Bits of code from upstream creeped down into LTS and Stable, creating fails and false skips. The offending code has been removed from the patch set.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
