* Install xfce4-power-manager by default on xfce desktop
- remove x11 config which is obsolete and prevent dkms functinality
- remove per board power manager install
* Update xfce4 configs
* Add plymouth-theme-armbian package
* Adjust all bootscripts to adapt plymouth
* Auto show logo accroding to BOOT_LOGO
* Enable plymouth detail mode when bootlogo=false
* Add a new board config var - HAS_VIDEO_OUTPUT
This var is used to indicate whether device has a HW video output.
If it's set to "no", we will disable kernel bootsplash, plymouth and BUILD_DESKTOP
* Rename package to be aligned with others
* Disable kernel bootloader, but keep the code for it
* Rather keep bootlogo in the kernel for a while, otherwise kernel upgrade will turn bootup into the darkness
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor <igor@armbian.com>
* rock-5b: add initial raxda rock-5b .wip (by @amazingfate); vendor u-boot & kernel
- .wip board
- using BOARDFAMILY `rk35xx`, which was for rock-3a
- patch by @piter75 uboot for working 'source' command so boot.scr can be used, and not extlinux
- .config: hammer CONFIG_JOYSTICK_XPAD & CONFIG_JOYSTICK_PSXPAD_SPI
- rock5 add kernel optiions by @lanefu
- disable CONFIG_LOCALVERSION_AUTO otherwise packaging goes insane
- make its kernel is own LINUXFAMILY to as to not mess up rock-3a
- CONFIG_VT=y & SKIP_BOOTSPLASH="yes"
* Add separate family for rock 5b - rockchip-rk3588
Co-authored-by: amazingfate <liujianfeng1994@gmail.com>
Co-authored-by: root <catalinii@yahoo.com>
* Add basic images for RockPi-S
* Rename rockpi-s.csc to rockpi-s.conf
* Need to have 2 x adv aka exposed images + fixing indent
* Add beta target
Co-authored-by: Igor Pecovnik <igor@armbian.com>
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* Support Tritium H3 and H5 Beta CLI
* Add Tritium H3 and H5 to build targets
* Rename tritium-h3.csc to tritium-h3.conf
* Rename tritium-h5.csc to tritium-h5.conf
* Rockchip64 Linux-5.10y - drivers for Motorcomm YT8531
renamed the previous "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" to "net-phy-Add-driver-for-Motorcomm-1-YT85xx-PHYs.patch" to fix patch order and added a new patch "net-phy-Add-driver-for-Motorcomm-2-YT8531-PHYs.patch"
The new YT8531 patch is sourced from from Lean's OpenWrt source rockchip/patches-5.10/601-net-phy-Add-driver-for-Motorcomm-YT8531-PHYs.patch.
It is intended to extend a patch identical to Armbian's "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" and is used without alteration.
* Add new board OrangePi R1 LTS (rk3328)
Includes uBoot and support for Linux-5.10y
* Rockchip64 Linux-5.15y drivers for YT8531 and other Motorcomm chips
YT8010, YT8510, YT8511, YT8512, YT8521. The driver patch set is sourced from Xunlong-OrangePi OpenWRT and is used as is, with only a name and makefile change.
A single patch set uses the same underlying source code as the Armbian Linux-5.10y set, but uses inbuilt logic to apply tweaks that depend on the Linux kernel version.
The patch is renamed similarly to the 5.10 patch set, net-phy-Add-driver-for-Motorcomm-T85xx+PHYs.patch to imply code base continuity with the previous similar Armbian patch sets.
* Rockchip64 Linux-5.15y support for Orange Pi R1 Plus LTS
Includes DTS and makefile changes. A driver for net phy YT8531C is in a separate commit
* change orangepi-r1plus-lts.csc to orangepi-r1plus-lts.conf
board is now supported
* - add patch also to 5.16.y
- fix wrong patch permission
* Fix Makefile patch
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Radxa Zero 2 is a small form factor SBC based on the Amlogic A311D
chipset that ships in a number of eMMC configurations:
- Amlogic A311D (Quad A73 + Dual A53) CPU
- 4GB LPDDR4 RAM
- 32/64/128GB eMMC
- Mali G52-MP4 GPU
- HDMI 2.1 output (micro)
- BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
- 1x USB 2.0 port - Type C (OTG)
- 1x USB 3.0 port - Type C (Host)
- 1x micro SD Card slot
- 40 Pin GPIO header
Signed-off-by: Yuntian Zhang <yt@radxa.com>
