The root hub in our Orion EHCI controller does have a Transaction
Translator, which is essential for low-/full-speed devices like
Bluetooth adapters. The support for this block got lost in the
5.4.y update (d4332b5), and this commit adds it back so that all
pre-high-speed devices work again.
This will enable building kernel modules for USB WiFi dongles using Ralink chips. Cardbus/PCI/PCIe has NOT been included. External firmware blobs are required for these to operate properly.
* Add initial support for FriendlyARM Nanopi R2s
One net port not working yet.
* Enable 2nd network, rename it to lan0, adjust motd to see lan*
* Added rk3328 dmc devfreq driver
* Fixed SD card issues for NanoPi R2s
* Added usb serial gadget console for NanoPi R2s
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
Change kernel config so that devices with a Broadcom
protocol HCI UART bluetooth devices (such as the AP6212
on the BananaPi M2 Zero) can autoload the bluetooth
firmware, without the need for hciattach or
brcm_patchram_plus.
* [ROCK Pi S] WIP mainline (dev) target
* [ROCK Pi S] Disable `rockchip64-dev` patches for now
* [ROCK Pi S] Add rtl8723ds wifi drivers
* [ROCK Pi S] Enable onboard audio (`rk3308-acodec`,`rk3308-i2s-tdm`)
Switch kernelsource to 5.5.y
* [ROCK Pi S] WIP: Use mainline 5.5.y kernel
Add a new `current` branch that tracks mainline
* [ROCK Pi S] Use updated u-boot board dt name `rk3308-rock-pi-s`
Removing the need for a special bootenv for n
* Temporally disable current
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* kernel: linux-sunxi-{dev,current}: Enable CONFIG_BT_HCIUART_BCM
This patch returns Broadcom's protocol for bluetooth HCI over serial port.
* BananaPiM2Zero: Patches for the devicetree
These patches add HDMI out (with audio) and add bluetooth / wifi
rfkill devices.
* Move to new version of wireless driver for 8188EU, disable staging driver from kernel which is worse quality
* Update driver for RTL8812AU/21AU and RTL8814AU
* [sunxi] allow pcm5102a codec module to be built
for sunxi-current and sunx-dev kernels.
Fixes#1798
* [sunxi] build pcm5102a and pcm51xx_(i2s|spi) modules by default
on sunxi-current and sunxi-dev kernels.
* Add exceptions to support native Ubuntu 20.04 building, fix small bug related to SD card write verification.
* Improve first install steps by installing Dialog and lsb_release first. This left out since we moved host install after we choose what we will do ... dialog is essential for this. Second we don't wait properly for APT manager to finish the process. Fixed with this commit
* Suppress output
* Update OdroidXU4 dev config & patches
* Attach Meson64 to mainline with a bunch of patches. Tested, but need further work.
* Enable DVFS on N2 which sometimes works, sometime doesn't, cleanup
* Enable beta targets for Meson64 kernel family
* Bump with version
Update configuration with default value.
Enable PCIe support.
Enable several USB modem.
Enable RTL8821CU wireless module.
Add various DVB USB receivers. (#1707)
Update the Kconfig symbols to 5.4.7. Also enable CONFIG_MESON_MX_EFUSE
to make the SoC temperature sensor work (calibration data has to be read
from the eFuse).
* Wireguard: bump tag to most recent since it breaks building on 5.4.y
* Move rockchip current to 5.4.y
* Move sunxi current to 5.4.y
* Move meson64 to 5.4.y
* Move odroidxu4 to 5.4.y and enable "current" targets
* Enable missing target
AR-1 - Adding support category for distributions
AR-4 - Remove Allwinner legacy
AR-5 - Drop Udoo family and move Udoo board into newly created imx6 family
AR-9 - Rename sunxi-next to sunxi-legacy
AR-10 - Rename sunxi-dev to sunxi-current
AR-11 - Adding Radxa Rockpi S support
AR-13 - Rename rockchip64-default to rockchip64-legacy
AR-14 - Add rockchip64-current as mainline source
AR-15 - Drop Rockchip 4.19.y NEXT, current become 5.3.y
AR-16 - Rename RK3399 default to legacy
AR-17 - Rename Odroid XU4 next and default to legacy 4.14.y, add DEV 5.4.y
AR-18 - Add Odroid N2 current mainline
AR-19 - Move Odroid C1 to meson family
AR-20 - Rename mvebu64-default to mvebu64-legacy
AR-21 - Rename mvebu-default to mvebu-legacy
AR-22 - Rename mvebu-next to mvebu-current
AR-23 - Drop meson64 default and next, current becomes former DEV 5.3.y
AR-24 - Drop cubox family and move Cubox/Hummingboard boards under imx6
AR-26 - Adjust motd
AR-27 - Enabling distribution release status
AR-28 - Added new GCC compilers
AR-29 - Implementing Ubuntu Eoan
AR-30 - Add desktop packages per board or family
AR-31 - Remove (Ubuntu/Debian) distribution name from image filename
AR-32 - Move arch configs from configuration.sh to separate arm64 and armhf config files
AR-33 - Revision numbers for beta builds changed to day_in_the_year
AR-34 - Patches support linked patches
AR-35 - Break meson64 family into gxbb and gxl
AR-36 - Add Nanopineo2 Black
AR-38 - Upgrade option from old branches to new one via armbian-config
AR-41 - Show full timezone info
AR-43 - Merge Odroid N2 to meson64
AR-44 - Enable FORCE_BOOTSCRIPT_UPDATE for all builds
The previos default kernel config was seting the Rockchip PCIe host
controller driver to be compiled as a module. This prevents booting
from PCIe attached devices (i.e. nvme ssd).
* UPSTREAM: media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*
Realigned the source code to the RC_TYPE* / RC_BIT_* refactoring
* Restored the inclusion of the DVB-USB dib0700 driver
Adjust configuration, merge with general purpose armv7 Fedora kernel, remove deprecated patch, move coherent_pool and cma to boot script
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* enable lima kernel driver for meson64-dev
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* meson64: set fbdev as default Xorg driver
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
Enabled support for WIFI module for MCIMX7SABRE board.
Required brcmfmac4339-sdio.bin & brcmfmac4339-sdio.txt in
/lib/firmware/brcm
Change-Id: I9eafaec978411d556f733f3c526e121d67823c03
* Initial commit for serial consoles rfc
* Board configuration cleanup + small tweaks
* Add serial gadget rename to dev kernel as well
* Cleanup, fixing permissions
* Cleanup board configs
* Initial commit for FA ZeroPi.
* Tested for building.
* Adjust few bugs.
* Move to WIP since its not tested on hardware yet.
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Added initial support of MCIMX7SABRE board
MCIMX7SABRE is NXP iMX7d-based board with 1Gb RAM
2xGBE, 1xmPCIe
Change-Id: I62685a55de54fa6109bef2a8e2ee760d831ffa0e
* Added initial support of MCIMX7SABRE board
MCIMX7SABRE is NXP iMX7d-based board with 1Gb RAM
2xGBE, 1xmPCIe
Change-Id: I62685a55de54fa6109bef2a8e2ee760d831ffa0e
* Changed BOARDFAMILY from mx7dsabre to imx7d
Change-Id: Id351c9f6a8c907b415b804bfe11b86027278ed86
* Disabled MD driver for imx7d Kernel
MD driver does not work correctly on NXP-modified kernel
Change-Id: I58e8de6ee0b99282c452f594e22f6f7e1ff59ae0
* Introducing build-all-ng
* Implementing REBUILD_IMAGES='board1,board2,...' for rebuilding certain images only
* Add optimisations when building kernels - only cycle trough needed targets. Adding variable for defining whether an image is build, otherwise only BSP is made.
* repository manipulating RFC
* Add bianco deb file that is added by default if repository is clean
* Switch to gpg2 signing method, small bugfix
* Create subdir for debs and debs-beta
* Synaptic bugfix: installing indexing tools https://forum.armbian.com/topic/8021-orange-pi-one-synaptic-package-manager-search-very-slow/?do=findComment&comment=74918
* add all modules by default to Odroid N2, but leave them commented
* Bugfix: not making any builds when selecting kernel_only
* Remove EXTERNAL=yes ... move armbian-config and armbian-firmware into main compilation area, drop others since they are deprecated anyway. This will also enable multi threaded images making
* Move armbian.list to create_sources_list function. Replace NTP by Chrony. Remove armbian-firmware from PACKAGE_LIST and RockPi 4A (#1528)
* Replace NTP by chrony. Remove installion of outdated armbian-firmware from reposity.
* added RockPi 4A
* New format for board config
* Fix Bluetooth dependencies for minimal package - add rfkill to family related installs
* Moving networkd-dispatcher from minimal image
* Cubox-i: update default config
* Improving umount process
* Add purgesource feature
* Add FULL_DESKTOP to install few more applications on top of our desktop - notebooks should * rk3399 default: adjust patches and configuration
* Enable full desktop on most powerfull boards and notebooks
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Attached cubox-i to stock kernel. Tested. Sadly ZRAM has some issues, so it must ramain disabled
* more imx6 updates for cubox/udoo
* Enable HDMI on Cubox-i
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Minimal build setup (#1463)
* Netplan folder check & armbian-tools dependency on expect (and tcl) solved (#1464)
* Prevent netplan configration if it is not installed
* Resolved expect dependecy of armbian-tools
* More packages added for armbian-tools
* Added python3-apt and rsyslog to minimal installation
* Debootstrap variant doesn't play nice. We loose networking and it affects standard builds as well. Removing.
* Python-to-Bash conversion (#1470)
* Remove python3-apt dependency from BSP package, fix netplan error also on Disco and putting back varint=minbase ... tested Disco, Bionic
* Distinguish package list: *-minimal.list and *-desktop.list
* Enable Wireguard back which was removed by mistake. https://github.com/armbian/build/issues/1471
* Having minbase debootstrap variant for all will require further adjustements with current package base - backward compatibility. Minimal image is now Python free but need further testings ...
* Add wireless-regdb and crda to the pakage base, fix Ubuntu keyring warning while debootstrap.
* Add figlet to sort out missing fonts
* Moving few packages here and there. Bugfix when creating a cache package list
* Manually compared base images - they are the same with small insignificant difference. Minimal image has to be futher tuned
* Adjustements for bash powered lsb_release, adding some needed packages
* Fixed (no) network problems on Bionic/Disco
* Add rsync to debootstrap_list and few minor fixes
* Adjust text in lsb_release
* Olimex Micro A20: fix wrong boot config
* Remove duplicate depenedency
* Odroid C1: adjust kernel config
when enable lima, it requires mesa upgrade or use fbdev for X11
and lima mesa driver is not ready for daily use.
use fbdev is same as disable lima
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* fix kernelcrash with config_of_overlay combined with isp1 camera driver,based on:
30a8401c2f
* add basic dtbo infrastucture
* set ov5647 (RPi cam rev 1.3) as default, imx219 (RPi cam V2.1) outputs a blurry green videostream at the moment
* maybe fix powering for camera
* adjust mainline dtbo patch to bsp kernel
* got you! little.. dtbo's are properly built and applied during boot.
* add imx219 overlay to switch between cameras & add ae/awb fix for ov 5647 from asus tinker repo
* patch imx219 up to 96396323fa
* bring back wireguard, otherwise igor gets grumpy :D
* fix camera status
* Initial Mvebu RFC https://github.com/armbian/build/issues/1426
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu: add missing patches
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu: change making u-boot targets to standard way, adjust patches and config
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* helios4: set default branch to use U-Boot 2018.11
Switch over to U-Boot 2018.11 that has been used for some time in next
branch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: Enable DEV branch
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: Add RTC support on Clearfog and Helios4
Added DM driver for mvebu RTC and enable it on Clearfog and Helios4
configuration.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* add boot-marvell.cmd backward compatibility
The patches added missing variable that used on boot-marvell.cmd and
also adjust the some memory addresses to prevent crash due to usage of
fdt_high and initrd_high.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios4: Added SPI NOR flash target
Build bootable SPI NOR flash image.
Change the boot order to USB -> SATA -> MMC
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Restore SPI support on U-Boot 2019.04
* mvebu: kernel: Added Wake-On-GPIO and WoL support
The patch set was missing during transition.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* [#1429] SolidRun's ARMADA A388 SOM U-Boot ODT Update
Old versions of U-Boot did not configure correctly the ODT on data
signals of DDR RAM on SolidRun's ARMADA A388 SOMs.
According to SolidRun Knowledge Base, the changes already pushed to
mainline U-Boot. But then it was overwritten when Marvell DDR Training
Tool updated
[URL]
https://developer.solid-run.com/knowledge-base/armada-38x-som-u-boot-odt-update/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* [#1429] mvebu: u-boot: Add revision id for Armada 38x B0
Added patch for SolidRun U-Boot v2018.01 and
for Helios4 U-Boot v2018.11
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* clearfog: Added SPI NOR flash target
Build bootable SPI NOR flash image.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: clearfog: DEV branch use mainline U-Boot
Also move clearfog base patch into its own board folder.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: enable U-Boot uart target
Normal MMC image can be used for uart boot using following command:
./tools/kwboot -b u-boot-spl.kwb /dev/ttyUSBX
But on Helios4, the SPL failed to continue the booting process if ECC is
enabled, so disable it.
Since the usage of uart boot is more for rescue/debug, disable autoboot.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: NEXT branch use mainline U-Boot
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: fix fancontrol related bug during buster testing
- On kernel 4.19, cpu thermal sensor changed the name from
armada_thermal into f10e4078.thermal. Added this new name to udev rules
- Since DEFAULT branch now use kernel 4.14, update fancontrol
configuration
- Load lm75 kernel module
- On kernel 4.19, cpu temp reading about 20 degree C lower, update
fancontrol configuration.
[URL]
https://forum.armbian.com/topic/10214-clearfogpro-possible-change-in-temperature-reporting-between-414next-and-419dev
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: Override vendor provided fancontrol unit
systemd emit following message on dmesg
systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/fancontrol.pid \xe2\x86\x92 /run/fancontrol.pid; please update
the unit file accordingly.
Override and change the value in the unit file to remove the message.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: DEV branch use its own u-boot patch folder
The patches are copied over from u-boot-mvebu-next
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: u-boot: Make clearfog model distinction more obvious
While at it, also change SerDes LANE4 into USB 3.0 on Clearfog Base.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* lib: Use apt-get install instead of dpkg on install_deb_chroot()
dpkg -i does not install dependencies required by the package.
This is needed if the BSP package requires other package that is not
installed during debootstrap.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: mvebu: helios4: Move various tweak to family_tweak_bsp()
Various tweak in family_tweaks_s() only applied to SD card image.
Move it to family_tweaks_bsp() so it will also included on the BSP
package and applied to existing user.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: mvebu: helios4: Add /etc/modules to BSP
On kernel 4.19, user need to modify the /etc/modules to add lm75 kernel
module. Pack the file into BSP so user no longer needed to modify it.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: kernel: Make zbud as built-in module
To remove the following error:
[ 1.705485] zswap: default zpool zbud not available
[ 1.705488] zswap: pool creation failed
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* bootscripts: mvebu: Add default value for spi_workaround
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: kernel: Backport armada_thermal changes to 4.14 (#1452)
On kernel 4.19, armada_thermal driver has been fixed to address
Marvell's Errata #132698 (The changes first appear on LK 4.16). The
result is temperature reading is around 20 degree Celsius lower.
Currently armbian-motd apply -20C tweak for both LK 4.14 and LK 4.19
which is incorrect. Instead of adding some logic on what condition to
apply the tweak, it is better to remove the tweak and patch the kernel
instead.
Revert commit b3dd4e9 ("[ mvebu ] Put back Armada temperature tweak in
motd")
which is part of #1421 solution.
[URL]
https://forum.armbian.com/topic/10214-clearfogpro-possible-change-in-temperature-reporting-between-414next-and-419dev/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: unified fancontrol config
Since LK 4.14 on DEFAULT branch already patched and the temp reading is
same as LK 4.19 on NEXT branch, it is no longer needed to separate
fancontrol configuration file.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: helios4: Remove rev id patch
The patch is already applied in helios4 repo, no need to have it in
armbian.
This revert helios4 part of commit 7411c55
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: clearfog: enable PCIe support and PCIe reset
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: clearfog: add boot-marvell.cmd backward compatibility
The patches added missing variable that used on boot-marvell.cmd and
also adjust the some memory addresses to prevent crash due to usage of
fdt_high and initrd_high.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: tweak regarding temperature setting
Make fan speed similar compared to pre-patched armada-thermal. Target
PWM value around 70 during idle.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: sources: clearfog to use u-boot 2018.01 for NEXT branch
This changes also affect Helios4. Moved the shared U-Boot source setting
back to Helios4 for NEXT branch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: boards: build Stretch image for Clearfog and Helios4
Also remove DEV from Helios4 CLI_TARGET
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: mvebu-next: Disable access to SPI Flash
User need to set spi_workaround=yes to enable SPI Flash access and lost
access to internal SATA.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu-next: adjust kernel config
* mvebu-dev: bump to 5.2 and adjust kernel configuraion. Tested for building.
* Adjust kernel config, add AUFS
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu-next: Adjust kernel config, add debug GPIO
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu-dev: separate Clearfog Base U-boot configuration file and patch
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
- change console welcome text
- changed display manager to lightdm by default and remove nodm completly
- desktop login manager enabled by default, toogle can be done with armbian-config
- added URL to the build script and commit hash to /etc/armbian-release file
- added debconf-utils,html2text,mmc-utils,sunxi-tools to the base and additional pkg list
- added synaptic package manager and onboard keyboard to the desktop base
- changed motd console welcome text to: Welcome to Debian Stretch with Armbian Linux 5.1.6-sunxi
- added "logout" to the panel/menu
- added normal users to additional groups: disk tty users games
* Adjust tabs and alter displaying build options at the end - hide empty ones
* Fix wrong MOTD message, adjust logic to autologin by default and request login for both notebooks
* Making fs cache naming more intuitive, rename script
* Move additional kernel drivers into separate file. Add AUFS for K5.1 this way, attach wireguard sources to last known working tag. master is broken atm
* Add two more extra wireless drivers 88x2BU, (improved) 8811EU and introduce switch EXTRAWIFI which is enabled by default
* Move 8812AU to the same version we have now. More recent has some performance issues in AP mode. Adjust configuration, add mvebut-dev 5.1.y kernel
* Enable Wireguard also on 3.10.y since it was fixed upstream. Attach bach to master branch since its working now
* Rockchip64 & RK3399 - upstream patches and remove deprecated patches, mvebu64 add DEV kernel attached to 5.1.y
* Enable BT on Tinkerboard CLI images as well
* cubox-i move to 5.1.y and enable missing HDMI
* Bugfixes for adding wireless driver to Kconfig. Adjusted RK3399 kernel due to upstream changes at FriendlyARM - does not boot yet. Changes has to be extract from their commits. Removed patches with RTL8188EU since we add more recent driver with a new precedure. Small fixes mvebu-default, udoo-next, s56818-next, ... remove deprecated patches.
* Boot-able RK3399-default config, add upstream patches for K4.4.y mvebu-default/udoo-next
* Adjust overclocking patch to meet upstream changes
* Odroid XU4 - remove deprecated kernel patches
Enabled BFQ IO Scheduler;
Enabled some Meson CLK options;
Added some DEVFREQ Governors as modules;
Enabled DVFS (CONFIG_PWM_MESON=y);
Enabled FUSE as module;
Enabled NFSD to enable use of NFS server;
* Disable watchdog NOWAYOUT in order to be able to stop watchdog during runtime.
* Make ORION watchdog a module instead of in-kernel to give more flexibility to user.
Armbian kernels all statically build and bind PPS support but most do not build any PPS client drivers.
This will add both GPIO and Serial (LDISC) clients as LKMs, suitable for many SBC-based projects and implementations.
Armbian kernels all statically build and bind PPS support but most do not build any PPS client drivers.
This will add both GPIO and Serial (LDISC) clients as LKMs, suitable for many SBC-based projects and implementations.
* Use RTC to set system clock on boot
Enable kernel use of RTC to set system clock early in boot
* Use RTC to set system clock on boot
Enable kernel use of RTC to set system clock early in boot
* Use RTC to set system clock on boot
Enable kernel use of RTC to set system clock early in boot
