* Correcting the Perf unit's interrupt source number to 66 as stated in the Allwinner A10User manual to resolve conflict with Uart 2 which actually uses interrupt source number 3
* rename to all lower case and add in sun4i-emac dma support. Note that support only exist in the driver for the rx channel
* Ensure that sun4i patches actually implemented
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Apply performance monitoring unit IRQ number patch to uboot
* Add patch for resolving the perf unit irq number to the edge kernel
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Add sun4i emac ethernet DMA support to the edge kernel
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Append missing .patch so that our patch is found and works properly
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Apply EMAC DMA support and PMU fix to edge kernel
---------
Signed-off-by: Ryan L <ryestar101@gmail.com>
* rockchip64: add `BOOT_SCENARIO=binman` for mainline u-boot
- drop special handling for 3308's `legacy` branch
- rpardini: note how SPI/mtd is not yet supported for this scenario
Co-authored-by: Ricardo Pardini <ricardo@pardini.net> (squash/splits, shellfmt)
* `rock-s0`/`rockpi-s`: use `BOOT_SCENARIO=binman`; move blobs to armbian/rkbin
- Move rk3308 boot blobs to armbian/rkbin
- delete obsolete ones
- Alter rock-s0 and rockpi-s to use the new "binman" BOOT_SCENARIO
Co-authored-by: Ricardo Pardini <ricardo@pardini.net> (shellfmt; small fixes; squashes)
- Bump U-Boot from v2024.10-rc3 to v2024.10
- Move U-Boot patch dir to default one (`$BOOTBRANCH/board_$BOARD`) which gets applied automatically by the patcher for the specific $BOARD
- Little fixes: Use `declare -g` and a code style similar to NanoPi R6 series
Removed gpio-keys node (NOTE: add to the M4 Berry DTS)
Add vcc1v8 and vcc3v3 regulators
Fixup MMC nodes
Add bluetooth node (NOTE: BT is still iffy in Armbian)
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Re-extract the kernel patches as a series.
Re-extract the u-boot patches as "git format-patch" command.
Unified patch extraction makes it easier to work with patches.
- in main `rockchip64` family, for current/edge (6.6 / 6.11)
- using mainline u-boot's generic rk3568 for current/edge
- vendor kernel is added via a copypasta hook to piggyback on `rk35xx`
- requires armbian/linux-rockchip PR https://github.com/armbian/linux-rockchip/pull/245
- vendor u-boot:
- is required to bringup npu for vendor kernel (otherwise panics)
- .dts done based on vendor kernel DT + looking at armsom-sige3
- defconfig ripped off from armsom-sige3
There are three revs: AM-GZ80x, AM-GZ80x-US and SC-GZ80x
Add a DSTI in case one should drop out of the sky and we
need a DTS for it. This also removes its dependency on
meson-axg-jethome-jethub-j1xx.dtsi.
Can now power down via power button on the back of the
unit and power back on via reset button on the side.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Add the A83T processor to the sunxi_mmc_can_calibrate
logic function for proper configuration.
Return the default settings of DRAM_CLK.
This code has been tested for bootloader v2024.01 and later.
* Gateway AM-GZ80x: Re-brand as Amper & update u-boot to v2024.04
During a search I noticed other companies are using the same
unit. Lets re-brand to Amper as technically that is the product
brand name.
Signed-off-by: Patrick Yavitz <pyavitz@armbian.com>
* Delete old patch set: `patch: u-boot: v2023.10: board_gateway-gz80x`
Signed-off-by: Patrick Yavitz <pyavitz@armbian.com>
* Update test target
---------
Signed-off-by: Patrick Yavitz <pyavitz@armbian.com>
Co-authored-by: Patrick Yavitz <pyavitz@armbian.com>
Co-authored-by: Igor <igor@armbian.com>
Reference patch set: https://patchwork.ozlabs.org/project/uboot/list/?series=411513&state=*
Hopefully, other boards using same uboot-version can benefit from the added support.
**Note for Maintainers - to enable KASLR seed, you need:**
- `CONFIG_RANDOMIZE_BASE=y` configured in your kernel .config
- `CONFIG_CMD_KASLRSEED=y` and` CONFIG_DM_RNG=y` configure in your u-boot .config
- exposed crypto and rng nodes in you board's device-tree
- `kasrlseed` command before kernel boot in your boot.cmd
- `CONFIG_SECURITY_DMESG_RESTRICT=y` in kernel .config is also advisable
* KASRL-supported u-boot 2024.07 for everyone:
- move /chosen/kaslr-seed support patchset to general 2024.07 BOOTPATCHDIR
- attach nanopi-r5c and oprangepi5-plus BOOTPACHDIR to patches/uboot/v2024.07 general dir
* u-boot: patch nanopi-r5c-rk3568_defconfig and orangepi-5-plus-rk3588_defconfig to enable KASLR
* rewrite-uboot-patches nanopi-r5c/orangepi5-plus
* patches: uboot: Improve kaslrseed support for v2024.07
---------
Co-authored-by: ColorfulRhino <131405023+ColorfulRhino@users.noreply.github.com>
- since 792d9d9d Variables add to environment in post_config_uboot_target function are ignored.
- So setting the variable ATF_LOAD_ADDR doesn't work anymore
- ATF_LOAD_ADDR changed in the uboot patch instead
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
A boot.cmd file still needs to be created, but this is
functional.
Overlay support is now baked into the syslinux patch.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
* To modify the PWM-fan temperature control policy of fine3399 to adjust the fan speed to a lower level
* Integrating support for xiaobaonas boards into the rockchip64-6.9 kernel
- rebased 2 patches
- moved null patches for dts & defconfigs to `dt` / `defconfig` dirs
- rename defconfigs since we're at it; use board-specific only
- defconfigs re-saved
- rebased 3 patches
- moved null patches for dts & defconfigs to `dt` / `defconfig` dirs
- don't rename defconfigs: those are shared with Joshua Riek (ubuntu-rockchip)
- defconfigs re-saved
* bump rk322x-box and rk3318-box to u-boot v2024.07-rc5
* leverage uboot relocation for rk3328
* rework hdmi/vop patches
* fix some usb issues on rk3318-box
* cleanup rk322x-box and rk3318-box old uboot patches
