* tf-a sources use mrvl_flash rather than 'all' target
* add armada 8k ethernet and SFP cages for macchiatobin use
* u-boot configuration for mcbin
* fix bootscript for u-boot variables
* separate ebin and mcbin with if statements
* add a8k PCIe and CPUFreq drivers for macchiatobin
* rk322x: add support for ssv6030p (disguise it as ssv6051p)
* rk322x: enable BPF filters and ancillary options, remove ssv6030 patches
* rk322x: enable BPF filters for edge 5.17 kernel
* Update linux-media-current.config
Adding thermal / temperature monitoring support for jetson nano
* Update linux-media-edge.config
Adding thermal / temperature monitoring support for jetson nano
* rk35xx: enable the CONFIG_F2FS_FS_COMPRESSION option
This allows to use compression on a F2FS partition to save space and
reduce I/O operations to media.
* all: enable the CONFIG_F2FS_FS_COMPRESSION option
* Add reg_ahci_5v status okay for bananapro board
* Bananapro: add AXP209 regulators
* Fix series.conf, Disable the patch that is not being applied.
* Fix linux-sunxi64-edge.config for v5.17.3
* Fix linux-sunxi-edge.config to v5.17.3
* Switch EDGE to core 5.17 for sunxi
* Remove the old rtl8723cs driver which is incompatible with the new kernel and cannot be used.
* Use AUFS if the kernel version is less than 5.16
* Print the last 20 lines of the log if the kernel compilation failed.
* Set KERNEL_VERSION_LEVEL to 5.17
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
add CONFIG_GPIO_SYSFS=y to linux-sunxi64-current.config and linux-sunxi64-edge.config
remove if EXPERT from /sys/class/gpio/... (sysfs interface) in /drivers/gpio/Kconfig
* Rockchip64 Linux-5.10y - drivers for Motorcomm YT8531
renamed the previous "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" to "net-phy-Add-driver-for-Motorcomm-1-YT85xx-PHYs.patch" to fix patch order and added a new patch "net-phy-Add-driver-for-Motorcomm-2-YT8531-PHYs.patch"
The new YT8531 patch is sourced from from Lean's OpenWrt source rockchip/patches-5.10/601-net-phy-Add-driver-for-Motorcomm-YT8531-PHYs.patch.
It is intended to extend a patch identical to Armbian's "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" and is used without alteration.
* Add new board OrangePi R1 LTS (rk3328)
Includes uBoot and support for Linux-5.10y
* Rockchip64 Linux-5.15y drivers for YT8531 and other Motorcomm chips
YT8010, YT8510, YT8511, YT8512, YT8521. The driver patch set is sourced from Xunlong-OrangePi OpenWRT and is used as is, with only a name and makefile change.
A single patch set uses the same underlying source code as the Armbian Linux-5.10y set, but uses inbuilt logic to apply tweaks that depend on the Linux kernel version.
The patch is renamed similarly to the 5.10 patch set, net-phy-Add-driver-for-Motorcomm-T85xx+PHYs.patch to imply code base continuity with the previous similar Armbian patch sets.
* Rockchip64 Linux-5.15y support for Orange Pi R1 Plus LTS
Includes DTS and makefile changes. A driver for net phy YT8531C is in a separate commit
* change orangepi-r1plus-lts.csc to orangepi-r1plus-lts.conf
board is now supported
* - add patch also to 5.16.y
- fix wrong patch permission
* Fix Makefile patch
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
