Igor Pecovnik
10e6445593
Fixate mvebu64-next to 4.14.y + patches adjustement, mvebu64-dev back to mainline. Both tested and working
2017-11-14 20:35:57 +01:00
Igor Pecovnik
31a71e8f57
Added few nightly targets for testing purposes. Cubietruck nightly will be disabled when stable images are out.
2017-11-14 20:26:25 +01:00
Igor Pecovnik
e783c9156d
Last upstream patch for 3.10.y / Pinebook
2017-11-14 09:05:38 +01:00
Igor Pecovnik
e8b0e6442a
Merge patch and patch fix
2017-11-14 07:32:51 +01:00
Igor Pecovnik
73a6443407
Patch fix
2017-11-14 07:11:42 +01:00
Igor Pecovnik
984dafe7b3
Upstream patches
2017-11-13 22:58:53 +01:00
Igor Pecovnik
1e65636648
Fix permissions
2017-11-13 21:03:55 +01:00
Igor Pecovnik
23412838d8
Reworked Beelink X2, Tested: USB ports, HDMI, eMMC install, wireless station (40-50Mbit/s at close proximity) and AP mode, ...
2017-11-13 20:03:40 +01:00
Igor Pecovnik
93504ee164
Added 8189es wireless driver.
2017-11-13 19:50:41 +01:00
Igor Pecovnik
0e4edab642
Remove unused rfkill bits
2017-11-13 12:28:22 +01:00
jaskcon
35247cc040
default network interface monitoring ( #821 )
...
* default network interface monitoring
I added the function NetworkMonitorMode(). One could argue that the MonitorMode() function should own these stats, but I think it would make things a bit too busy-ish. Having said that, I'm not married to accessing network stats through an independent function.
regards..../j
* Update armbianmonitor
* Update armbianmonitor
* Update armbianmonitor
* Update armbianmonitor
* Update armbianmonitor
2017-11-12 21:30:57 +01:00
Igor Pecovnik
d98c960ed5
Add Beelink X2 nightly images
2017-11-12 17:23:49 +01:00
Igor Pecovnik
37433ccc38
Enable Wireless and Nightly Stretch image for Nanopi Neo Air
2017-11-12 13:27:13 +01:00
Igor Pecovnik
922e5454aa
Add better / AC capable / Realtek 8811/12/14 wireless driver to Odroid XU4 NEXT
2017-11-12 11:58:13 +01:00
zador-blood-stained
29e9d961b7
Don't show armbian-config MOTD if it's not installed
2017-11-12 13:42:50 +03:00
zador-blood-stained
b0d9d9620c
Update the issue template
2017-11-12 13:35:43 +03:00
zador-blood-stained
42e1ee8330
Update armbian-config packaging
2017-11-12 13:35:27 +03:00
Igor Pecovnik
96324893b3
Remove debug code :)
2017-11-12 09:19:46 +01:00
Igor Pecovnik
aa4b4b1aa6
Armbian-config packaging bugfix
2017-11-12 09:18:59 +01:00
zador.blood.stained
0dabbbafa2
Silence output from log2ram in its cron script
...
Closes #813
2017-11-11 23:49:59 +03:00
zador-blood-stained
fbaba7b3ed
Small cleanup
2017-11-11 22:52:42 +03:00
zador-blood-stained
5b95083b01
Rework armbian-config packaging script
2017-11-11 22:48:09 +03:00
Igor Pecovnik
325d18b4f5
Packing armbian-config
2017-11-11 20:34:23 +01:00
Igor Pecovnik
d95d45f209
Orangepi Zero Plus2 configuration cleanup. Tried to enabled BT but it doesn't want to work ...
2017-11-11 20:02:07 +01:00
zador-blood-stained
0d57597ab2
Rename helios4 bootenv file
2017-11-11 17:51:29 +03:00
zador-blood-stained
28502a0472
Clean up executable bits in patch files
2017-11-11 17:49:39 +03:00
zador-blood-stained
8ed55d9768
Clean up NM policykit files
2017-11-11 17:35:22 +03:00
jaskcon
494c3811b8
Fixes to ProcessStats() and the associated calls ( #820 )
...
Changes to the 'ProcessStats()' function to pull and compute system load values with better accuracy
Changes to the 'MonitorMode()' function to display the system load values with better accuracy [call ProcessStats() and load values through the $procStats variable]
2017-11-11 14:38:28 +01:00
Igor Pecovnik
edd32a15ec
More conservative HT and VHT initial settings for hostapd.
2017-11-10 22:25:02 +01:00
ThomasKaiser
179c95a435
NanoPi NEO Plus2 needs 816 MHz, enable 4th USB host port
...
As soon as dvfs nodes are added we can increase cpufreq to 1200
2017-11-10 17:10:46 +01:00
Igor Pecovnik
0a0f54174b
Disable desktop target on Neo2+ and switch to Stretch
2017-11-10 16:00:43 +01:00
Igor Pecovnik
28035119f8
Add Nanopi Neo Plus2 DT. Since I own engenering sample, most of addon HW features (wifi/eMMC) remain untested.
2017-11-10 15:33:06 +01:00
ThomasKaiser
6161ac89f5
Adjust NanoPi M1 Plus 2 DRAM freq to FriendlyELEC defaults
2017-11-09 11:07:50 -08:00
Igor Pecovnik
2c538e007d
Expose correct nightly image Nanopi M1+2
2017-11-09 20:04:11 +01:00
Igor Pecovnik
c7fac68056
Add FriendlyARM M1 Plus2 .... HDMI works, eMMC, USB, ... need more testing. Enabled nightly image
2017-11-09 19:12:29 +01:00
ThomasKaiser
0fd929113a
Enable CONFIG_ECRYPT_FS=m in ODROID XU4 next
...
https://forum.armbian.com/topic/5612-xu4-ecryptfs-kernel-module-support/
2017-11-09 09:31:51 -08:00
Igor Pecovnik
785198eef5
Add Friendlyarm Nanopi M1+, add 3rd USB port for M1, RTSCTS pin for UART3
2017-11-09 17:34:43 +01:00
Igor Pecovnik
c436b835f8
Banana M2+ removing regulator, adding FriendlyARM M1
2017-11-09 15:38:04 +01:00
Igor Pecovnik
204c8d39b1
Bananapi M2+. Enable HDMI on NEXT kernel, g_serial, Stretch deskop nightly, small bugfix on deskop creation
2017-11-09 13:24:15 +01:00
ThomasKaiser
210b42d7e2
Enable next target for NanoPi M1 Plus
2017-11-08 13:25:54 -08:00
Igor Pecovnik
dc045b507e
Minor desktop related tweak. Removing XFCE "about" from the middle of the menu
2017-11-08 20:09:49 +01:00
Igor Pecovnik
a3313fc35b
Fixing permission for Network manger
2017-11-08 20:01:10 +01:00
Igor Pecovnik
8b4d703f41
Desktop rework. Shortcuts to armbian-config, support and donate were moved to menu, default icon theme - installing with workaround - was changed to lighter one (Numix), fixed login greeter theme, changed default wallpaper
2017-11-08 18:45:59 +01:00
ThomasKaiser
cac4155f81
Few more cosmetical armbianmonitor fixes
2017-11-08 15:32:19 +01:00
ThomasKaiser
67de9a2369
Cosmetic MonitorMode changes in armbianmonitor
2017-11-08 14:08:32 +01:00
jaskcon
1a6041a0b2
Update armbianmonitor ( #819 )
...
* Update armbianmonitor
Two proposed changes to 'MonitorMode':
Change 0 [Fix the real-time monitor 'sleep' value so it can be adjusted at runtime]
line 138: equate 'interval' with $1 (note: in the 'case' routine, $2 == command-line $1)
line 325: change term 1 of the comparator from '$1' to 'interval'
Change 1 [add fixed-line functionality to the real-time monitor]
lines 291,297: retain the 'DisplayHeader' reprint routine for command-line case '-m' (scrolled output)
lines 326-328: add the overwrite routine for command-line case '-M' (fixed-line output)
* Update armbianmonitor
* Update armbianmonitor
2017-11-08 08:41:27 +01:00
Stefan Mavrodiev
7051559bcd
Initial support for A20-SOM-EVB ( #817 )
2017-11-07 13:38:51 +03:00
Igor Pecovnik
0ca62c3c0c
Check for special interfaces setup. This is used when creating AP
2017-11-06 19:10:43 +01:00
zador-blood-stained
ee9d98b18b
Fix mvebu default/next u-boot patch directory
2017-11-06 15:40:33 +03:00
zador.blood.stained
5358e31a3a
Rename Helios4 u-boot include file
2017-11-06 13:11:44 +03:00
