n2n/doc/Building.md

n2n on macOS

In order to use n2n on macOS, you first need to install support for TUN/TAP interfaces:

brew tap homebrew/cask
brew cask install tuntap

If you are on a modern version of macOS (i.e. Catalina), the commands above will ask you to enable the TUN/TAP kernel extension in System Preferences → Security & Privacy → General.

For more information refer to vendor documentation or the Apple Technical Note.

Build on Windows

Requirements

In order to build on Windows the following tools should be installed:

• Visual Studio. For a minimal install, the command line only build tools can be downloaded and installed from https://visualstudio.microsoft.com/downloads/#build-tools-for-visual-studio-2017

• Cmake

• (optional) The OpenSSL library. Prebuild binaries can be downloaded from https://slproweb.com/products/Win32OpenSSL.html . The full version is required (not the "Light" version). The Win32 version of it is usually required for a standard build.

  NOTE: in order to skip OpenSSL compilation, edit CMakeLists.txt and replace

  OPTION(N2N_OPTION_AES "USE AES" ON)
  with
  OPTION(N2N_OPTION_AES "USE AES" OFF)
  

  NOTE: to static link OpenSSL, add the -DOPENSSL_USE_STATIC_LIBS=true option to the cmake command

In order to run n2n:

• The TAP drivers should be installed into the system. They can be installed from http://build.openvpn.net/downloads/releases (search for "tap-windows")
• If OpenSSL has been linked dynamically, the corresponding .dll file should be available into the target computer

Build (CLI)

In order to build from the command line, open a terminal window and run the following commands:

md build
cd build
cmake ..

MSBuild edge.vcxproj /t:Build /p:Configuration=Release
MSBuild supernode.vcxproj /t:Build /p:Configuration=Release

NOTE: if cmake has problems finding the installed OpenSSL library, try to download the official cmake and invoke it with: C:\Program Files\CMake\bin\cmake

The compiled exe files should now be available under the Release directory.

Run

The edge.exe program reads the edge.conf file located into the current directory if no option is provided.

Here is an example edge.conf file:

-c=mycommunity
-k=mysecretkey

# supernode IP address
-l=1.2.3.4:5678

# edge IP address
-a=192.168.100.1

The supernode.exe program reads the supernode.conf file located into the current directory if no option is provided.

Here is an example supernode.conf file:

-l=5678

See edge.exe --help and supernode.exe --help for a list of supported options.

General Building Options

Compiler Optimizations

The easiest way to boosting speed is by allowing the compiler to apply optimization to the code. To let the compiler know, the configuration process can take in the optionally specified compiler flag -O3:

./configure CFLAGS="-O3"

The tools/n2n-benchmark tool reports speed-ups of 200% or more! There is no known risk in terms of instable code or so.

Hardware Features

Some parts of the code can be compiled to benefit from available hardware acceleration. It needs to be decided at compile-time. So, if compiling for a specific platform with known features (maybe the local one), it should be specified to the compiler, for example through the -march=sandybridge (you name it) or just -march=native for local use.

So far, the following portions of n2n's code benefit from hardware features:

AES:               AES-NI
ChaCha20:          SSE2, SSSE3
SPECK:             SSE2, SSSE3, AVX2, NEON
Pearson Hashing:   AES-NI
Random Numbers:    RDSEED, RDRND (not faster but more random seed)

The compilations flags could easily be combined:

./configure CFLAGS="-O3 -march=native".

OpenSSL Support

Some ciphers' speed can take advantage of OpenSSL support which is disabled by default as the built-in ciphers already prove reasonably fast in most cases. OpenSSL support can be configured using

./configure --with-openssl

which then will include OpenSSL 1.1 if found on the system. This can be combined with the hardware support and compiler optimizations such as

./configure --with-openssl CFLAGS="-O3 -march=native"

Please do no forget to make clean after (re-)configuration and before building (again) using make.

ZSTD Compression Support

In addition to the built-in LZO1x for payload compression (-z1 at the edge's commandline), n2n optionally supports ZSTD. As of 2020, it is considered cutting edge and praised for reaching the currently technologically possible Pareto frontier in terms of CPU power versus compression ratio. ZSTD support can be configured using

./configure --with-zstd

which then will include ZSTD if found on the system. It will be available via -z2 at the edges. Of course, it can be combined with the other features mentioned above:

./configure --with-zstd --with-openssl CFLAGS="-O3 -march=native"

Again, and this needs to be reiterated sufficiently often, please do no forget to make clean after (re-)configuration and before building (again) using make.

Federation – Supernode Selection by Round Trip Time

If used with multiple supernodes, by default, an edge choses the least loaded supernode to connect to. This selection strategy is part of the federation feature and aims at a fair workload distribution among the supernodes. To serve special scenarios, an edge can be compiled to always connect to the supernode with the lowest round trip time, i.e. the "closest" with the lowest ping. However, this could result in not so fair workload distribution among supernodes. This option can be configured by defining the macro SN_SELECTION_RTT and affects edge's behaviour only:

./configure CFLAGS="-DSN_SELECTION_RTT"

which of course can be combined with the compiler optimizations mentioned above…

Note that the activation of this strategy requires a sufficiently accurate local day-of-time clock. It probably will fail on smaller systems using uclibc (instead of glibc) whose day-of-time clock is said to not provide sub-second accuracy.