mirror of
https://github.com/ntop/n2n.git
synced 2024-09-20 09:01:10 +02:00
25ac58900a
The `/etc/config` directory should only store the "UCI" configuration files. Reference: https://openwrt.org/docs/guide-user/base-system/uci
40 lines
1.4 KiB
Markdown
40 lines
1.4 KiB
Markdown
## Prerequisites
|
|
|
|
This instructions explain how to build an OpenWRT .ipk package for n2n.
|
|
|
|
Before going on, it is required to have a working cross-compiling build
|
|
environment for the OpenWRT version installed into your device. This usually
|
|
comes down to the following steps:
|
|
|
|
1. Download and extract the SDK toolchain for your device. The toolchain
|
|
must match the *exact* OpenWRT version installed in your device. Toolchain
|
|
for official OpenWRT images can be downloaded from https://downloads.openwrt.org
|
|
|
|
2. Build the toolchain: run `make menuconfig`, save the configuration, then
|
|
run `make` to build the cross compiling tools
|
|
|
|
3. Download the feeds with `./scripts/feeds update -a`
|
|
|
|
## Compilation
|
|
|
|
From the OpenWRT build directory:
|
|
|
|
```
|
|
git clone https://github.com/ntop/n2n n2n
|
|
cp -r n2n/packages/openwrt package/n2n
|
|
make menuconfig # select Network -> VPN -> n2n-edge and n2n-supernode
|
|
make package/n2n/compile V=s
|
|
```
|
|
|
|
If everything went fine, two ipk will be generated, one for the n2n-edge
|
|
and the other for n2n-supernode. They can be found with `find . -name "n2n*.ipk"`,
|
|
copied to the target device, and installed with `opkg install`.
|
|
|
|
## Configuration
|
|
|
|
The edge node can be started with `/etc/init.d/edge start`.
|
|
Its configuration file is `/etc/n2n/edge.conf`.
|
|
|
|
The supernode can be started with `/etc/init.d/supernode start`.
|
|
Its configuration file is `/etc/n2n/supernode.conf`.
|