enoch/armbian-build
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f614caeb97
armbian-build/config/cubieboard4.fex
Igor Pecovnik cb45a5c6fe Added new boards, altered sources, bugfixes
2014-11-26 12:33:58 +01:00

1830 lines
66 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;A80 PAD application
;---------------------------------------------------------------------------------------------------------
; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
;---------------------------------------------------------------------------------------------------------
[product]
version = "100"
machine = "cubieboard4"
[platform]
eraseflag = 0
;----------------------------------------------------------------------------------
; system configuration
; ?
;dcdc1_vol ---set dcdc1 voltage,mV,1600-3400,100mV/step
;dcdc2_vol ---set dcdc2 voltage,mV,600-1540,20mV/step
;dcdc3_vol ---set dcdc3 voltage,mV,600-1860,20mV/step
;dcdc4_vol ---set dcdc4 voltage,mV,600-1540,20mV/step
;dcdc5_vol ---set dcdc5 voltage,mV,1000-2550,50mV/step
;aldo2_vol ---set aldo2 voltage,mV,700-3300,100mV/step
;aldo3_vol ---set aldo3 voltage,mV,700-3300,100mV/step
;----------------------------------------------------------------------------------
[target]
boot_clock = 1008
storage_type = -1
[charging_type]
charging_type = 1
;---------------------------------------------------------------------------------
; uboot key detect enable
; 当keyen_flag = 1 时，支持按键检测
; 当keyen_flag = 0 时，不支持
;---------------------------------------------------------------------------------
[key_detect_en]
keyen_flag = 0
;----------------------------------------------------------------------------------
;
; 各路电压输出语法说明：
;
; 电压名称 = 100XXXX : 表示把该路电压设置为XXXX指定的电压值，同时打开输出开关
; 电压名称 = 000XXXX : 表示把该路电压设置为XXXX指定的电压值，同时关闭输出开关，当有需要时由内核驱动打开
; 电压名称 = 0 : 表示关闭该路电压输出开关，不修改原有的值
;
;----------------------------------------------------------------------------------
[power_sply]
dcdc1_vol = 1003000
dcdc2_vol = 900
dcdc3_vol = 1000900
dcdc4_vol = 1000900
dcdc5_vol = 1001500
dc5ldo_vol = 1000900
dldo2_vol = 1003000
eldo3_vol = 1001800
aldo1_vol = 1003000
aldo3_vol = 1003000
gpio1_vol = 0002500
[slave_power_sply]
dcdca_vol = 1000900
dcdcb_vol = 0
dcdcc_vol = 0
dcdcd_vol = 1000900
dcdce_vol = 1002100
aldo1_vol = 1003000
bldo1_vol = 1001800
bldo2_vol = 1001800
cldo1_vol = 0003000
[gpio_bias]
pa_bias = "axp809:gpio1:2500"
pb_bias = "axp809:aldo2:1800"
pc_bias = "axp809:dcdc1:3000"
pd_bias = "axp806:bldo1:1800"
pe_bias = "axp809:eldo2:1800"
pf_bias = "axp809:dcdc1:3000"
pg_bias = "axp809:gpio0:3000"
ph_bias = "axp809:dcdc1:3000"
pl_bias = "axp809:dldo2:3000"
pm_bias = "axp809:eldo3:3000"
[card_boot]
logical_start = 40960
sprite_gpio0 =
next_work = 3
;---------------------------------------------------------------------------------------------------------
; if 1 == standby_mode, then support super standby;
; else, support normal standby.
;---------------------------------------------------------------------------------------------------------
[pm_para]
standby_mode = 1
[card0_boot_para]
card_ctrl = 0
card_high_speed = 1
card_line = 4
sdc_d1 = port:PF00<2><1><default><default>
sdc_d0 = port:PF01<2><1><default><default>
sdc_clk = port:PF02<2><1><default><default>
sdc_cmd = port:PF03<2><1><default><default>
sdc_d3 = port:PF04<2><1><default><default>
sdc_d2 = port:PF05<2><1><default><default>
[card2_boot_para]
card_ctrl = 2
card_high_speed = 1
card_line = 4
sdc_cmd = port:PC06<3><1><default><default>
sdc_clk = port:PC07<3><1><default><default>
sdc_d0 = port:PC08<3><1><default><default>
sdc_d1 = port:PC09<3><1><default><default>
sdc_d2 = port:PC10<3><1><default><default>
sdc_d3 = port:PC11<3><1><default><default>
[boot_disp]
output_disp = 1
output_type = 3
output_mode = 4
auto_hpd = 1
[twi_para]
twi_port = 0
twi_scl = port:PH14<2><default><default><default>
twi_sda = port:PH15<2><default><default><default>
[uart_para]
uart_debug_port = 0
uart_debug_tx = port:PH12<2><1><default><default>
uart_debug_rx = port:PH13<2><1><default><default>
[jtag_para]
jtag_enable = 1
jtag_ms = port:PF00<3><default><default><default>
jtag_ck = port:PF05<3><default><default><default>
jtag_do = port:PF03<3><default><default><default>
jtag_di = port:PF01<3><default><default><default>
[clock]
pll4 = 300
pll6 = 600
pll8 = 297
pll9 = 297
pll10 = 2376
;*****************************************************************************
;sdram configuration
;
;dram_para2 = 0x00001200 ;代表启用dram双通道
;
;dram_para2 = 0x00001100 ;代表启用dram单通道
;
;*****************************************************************************
[dram_para]
dram_clk = 672
dram_type = 3
dram_zq = 0x003F3FDD
dram_odt_en = 1
dram_para1 = 0x10f41000
dram_para2 = 0x00001200
dram_mr0 = 0x1A50
dram_mr1 = 0x40
dram_mr2 = 0x10
dram_mr3 = 0
dram_tpr0 = 0x04E214EA
dram_tpr1 = 0x004214AD
dram_tpr2 = 0x10A75030
dram_tpr3 = 0
dram_tpr4 = 0
dram_tpr5 = 0
dram_tpr6 = 0
dram_tpr7 = 0
dram_tpr8 = 0
dram_tpr9 = 0
dram_tpr10 = 0
dram_tpr11 = 0
dram_tpr12 = 168
dram_tpr13 = 0x23
;----------------------------------------------------------------------------------
;os life cycle para configuration
;----------------------------------------------------------------------------------
;------------------------------------------------------------------------------;
; 10/100/100Mbps Ethernet MAC Controller Configure ;
;------------------------------------------------------------------------------;
; 配置选项： ;
; gmac_used --- 1: gmac used, 0: not used ;
; gmac_powerx -- A[:B] A: axp channel, B: voltage value ;
;------------------------------------------------------------------------------;
; MII GMII RGMII MII GMII RGMII MII GMII RGMII ;
;PA00~03 * * * PA10 * * PA20 * * * ;
; PA04 * PA11~14 * * * PA21 * * ;
; PA05 * PA15 * PA22 * * ;
; PA06 * PA16 * PA23 * * ;
; PA07 * PA17 * PA24 * * ;
; PA08 * * PA18 * PA25 * * ;
; PA09 * * * PA19 * * * PA26~27 * * * ;
;------------------------------------------------------------------------------;
[gmac0]
gmac_used = 1
gmac_rxd3 = port:PA00<2><default><3><default>
gmac_rxd2 = port:PA01<2><default><3><default>
gmac_rxd1 = port:PA02<2><default><3><default>
gmac_rxd0 = port:PA03<2><default><3><default>
gmac_rxclk = port:PA04<2><default><3><default>
gmac_rxdv = port:PA05<2><default><3><default>
;gmac_rxerr = port:PA06<2><default><3><default>
gmac_txd3 = port:PA07<2><default><3><default>
gmac_txd2 = port:PA08<2><default><3><default>
gmac_txd1 = port:PA09<2><default><3><default>
gmac_txd0 = port:PA10<2><default><3><default>
;gmac_crs = port:PA11<2><default><3><default>
gmac_txclk = port:PA12<2><default><3><default>
gmac_txen = port:PA13<2><default><3><default>
gmac_txerr = port:PA14<2><default><3><default>
gmac_col = port:PA15<2><default><3><default>
gmac_mdc = port:PA16<2><default><3><default>
gmac_mdio = port:PA17<2><default><3><default>
gmac_power1 = "axp15_cldo1:3000000"
gmac_power2 = "axp22_ldoio1"
;---------------------------------------------------------------------------------------------------------
; wakeup_src_para:
; sometimes, u would like to add more wakeup src in standby mode, these para will be
; help;
; u need to make sure the standby mode support the wakeup src. Also, some hw
; condition must be guaranteed.
; including:
; cpu_en: power on or off.
; 1: mean power on
; 0: mean power off
; cpu_freq: indicating lowest freq. unit is Mhz;
; dram selfresh_en: selfresh or not.
; 1: enable enter selfresh
; 0: disable enter selfresh
; dram_pll: if not enter selfresh, indicating lowest freq. unit is Mhz;
; wakeup_src: to make the scenario work, the wakeup src is needed.
;---------------------------------------------------------------------------------------------------------
[wakeup_src_para]
cpu_en = 0
cpu_freq = 48
; (cpu:apb:ahb)
pll_ratio = 0x111
dram_selfresh_en = 1
dram_freq = 36
wakeup_src0 =
wakeup_src_wl = port:PL03<4><default><default><0>
wakeup_src_bt = port:PL04<4><default><default><0>
bb_wake_ap = port:PM01<4><default><default><0>
;----------------------------------------------------------------------------------
;i2c configuration
;----------------------------------------------------------------------------------
[twi0]
twi_used = 1
twi_scl = port:PH0<2><default><default><default>
twi_sda = port:PH1<2><default><default><default>
[twi1]
twi_used = 1
twi_scl = port:PH2<2><default><default><default>
twi_sda = port:PH3<2><default><default><default>
[twi2]
twi_used = 1
twi_scl = port:PH4<2><default><default><default>
twi_sda = port:PH5<2><default><default><default>
[twi3]
twi_used = 0
twi_scl = port:PG10<2><default><default><default>
twi_sda = port:PG11<2><default><default><default>
[twi4]
twi_used = 0
twi_scl = port:PB15<4><default><default><default>
twi_sda = port:PB16<4><default><default><default>
;----------------------------------------------------------------------------------
;uart configuration
;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
;----------------------------------------------------------------------------------
[uart0]
uart_used = 1
uart_port = 0
uart_type = 2
uart_tx = port:PH12<2><1><default><default>
uart_rx = port:PH13<2><1><default><default>
[uart1]
uart_used = 0
uart_port = 1
uart_type = 8
uart_tx = port:PA0<4><1><default><default>
uart_rx = port:PA1<4><1><default><default>
uart_rts = port:PA2<4><1><default><default>
uart_cts = port:PA3<4><1><default><default>
;uart_dtr = port:PA4<4><1><default><default>
;uart_dsr = port:PA5<4><1><default><default>
;uart_dcd = port:PA6<4><1><default><default>
;uart_ring = port:PA7<4><1><default><default>
[uart2]
uart_used = 1
uart_port = 2
uart_type = 4
uart_tx = port:PG06<2><1><default><default>
uart_rx = port:PG07<2><1><default><default>
uart_rts = port:PG08<2><1><default><default>
uart_cts = port:PG09<2><1><default><default>
[uart3]
uart_used = 0
uart_port = 3
uart_type = 4
uart_tx = port:PB05<3><1><default><default>
uart_rx = port:PB06<3><1><default><default>
uart_rts = port:PB04<3><1><default><default>
uart_cts = port:PB00<3><1><default><default>
[uart4]
uart_used = 1
uart_port = 4
uart_type = 4
uart_tx = port:PG12<2><1><default><default>
uart_rx = port:PG13<2><1><default><default>
uart_rts = port:PG14<2><1><default><default>
uart_cts = port:PG15<2><1><default><default>
[uart5]
uart_used = 1
uart_port = 5
uart_type = 2
uart_tx = port:PE04<4><1><default><default>
uart_rx = port:PE05<4><1><default><default>
;----------------------------------------------------------------------------------
;SPI controller configuration
;----------------------------------------------------------------------------------
[spi0]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PC19<3><1><default><default>
spi_sclk = port:PC02<3><default><default><default>
spi_mosi = port:PC00<3><default><default><default>
spi_miso = port:PC01<3><default><default><default>
[spi1]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 =
spi_sclk =
spi_mosi =
spi_miso =
[spi2]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PE04<3><1><default><default>
spi_sclk = port:PE05<3><default><default><default>
spi_mosi = port:PE06<3><default><default><default>
spi_miso = port:PE07<3><default><default><default>
[spi3]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PH17<2><1><default><default>
spi_cs1 = port:PH18<2><1><default><default>
spi_cs2 = port:PH12<3><1><default><default>
spi_cs3 = port:PH13<3><default><default><default>
spi_sclk = port:PH14<2><default><default><default>
spi_mosi = port:PH15<2><default><default><default>
spi_miso = port:PH16<2><default><default><default>
;----------------------------------------------------------------------------------
;SPI device configuration
;----------------------------------------------------------------------------------
[spi_devices]
spi_dev_num = 1
[spi_board0]
modalias = "m25p32"
max_speed_hz = 33000000
bus_num = 0
chip_select = 0
mode = 0
;----------------------------------------------------------------------------------
;resistance tp configuration
;----------------------------------------------------------------------------------
[rtp_para]
rtp_used = 0
rtp_screen_size = 5
rtp_regidity_level = 5
rtp_press_threshold_enable = 0
rtp_press_threshold = 0x1f40
rtp_sensitive_level = 0xf
rtp_exchange_x_y_flag = 0
;----------------------------------------------------------------------------------
;capacitor tp configuration
;external int function
;wakeup output function
;notice --- tp_int_port & tp_io_port use the same port
;----------------------------------------------------------------------------------
[ctp_para]
ctp_used = 0
ctp_twi_id = 1
ctp_twi_addr = 0x5d
ctp_screen_max_x = 1280
ctp_screen_max_y = 800
ctp_revert_x_flag = 1
ctp_revert_y_flag = 1
ctp_exchange_x_y_flag = 1
ctp_int_port =
ctp_wakeup =
;--------------------------------------------------------------------------------
; CTP automatic detection configuration
;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[ctp_list_para]
ctp_det_used = 1
ft5x_ts = 1
gt82x = 1
gslX680 = 1
gt9xx_ts = 1
gt811 = 1
zet622x = 1
aw5306_ts = 1
;----------------------------------------------------------------------------------
;touch key configuration
;----------------------------------------------------------------------------------
[tkey_para]
tkey_used = 0
tkey_twi_id =
tkey_twi_addr =
tkey_int =
;----------------------------------------------------------------------------------
;motor configuration
;----------------------------------------------------------------------------------
[motor_para]
motor_used = 0
motor_shake = 0
motor_ldo = axp22_ldoio0
motor_ldo_voltage = 3300
;----------------------------------------------------------------------------------
;thermal configuration
;----------------------------------------------------------------------------------
[ths_para]
ths_used = 1
ths_trend = 0
ths_trip1_count = 5
ths_trip1_0 = 60
ths_trip1_1 = 75
ths_trip1_2 = 85
ths_trip1_3 = 95
ths_trip1_4 = 105
ths_trip1_5 = 0
ths_trip1_6 = 0
ths_trip1_7 = 0
ths_trip1_0_min = 0
ths_trip1_0_max = 1
ths_trip1_1_min = 1
ths_trip1_1_max = 2
ths_trip1_2_min = 2
ths_trip1_2_max = 5
ths_trip1_3_min = 5
ths_trip1_3_max = 9
ths_trip1_4_min = 0
ths_trip1_4_max = 0
ths_trip1_5_min = 0
ths_trip1_5_max = 0
ths_trip1_6_min = 0
ths_trip1_6_max = 0
ths_trip2_count = 1
ths_trip2_0 = 105
;----------------------------------------------------------------------------------
;cooler_table cooler_count <=32
;----------------------------------------------------------------------------------
[cooler_table]
cooler_count = 10
cooler0 = "1200000 4 1800000 4"
cooler1 = "1200000 4 1608000 4"
cooler2 = "1200000 4 1440000 4"
cooler3 = "1200000 4 1200000 4"
cooler4 = "1200000 4 1200000 3"
cooler5 = "1200000 4 1440000 2"
cooler6 = "1200000 4 1200000 2"
cooler7 = "1200000 4 1200000 1"
cooler8 = "1200000 4 4294967295 0"
cooler9 = "600000 4 4294967295 0"
;----------------------------------------------------------------------------------
[nand0_para]
nand_support_2ch = 0
nand0_used = 0
nand0_we = port:PC00<2><default><default><default>
nand0_ale = port:PC01<2><default><default><default>
nand0_cle = port:PC02<2><default><default><default>
nand0_ce1 = port:PC03<2><default><default><default>
nand0_ce0 = port:PC04<2><default><default><default>
nand0_nre = port:PC05<2><default><default><default>
nand0_rb0 = port:PC06<2><default><default><default>
nand0_rb1 = port:PC07<2><default><default><default>
nand0_d0 = port:PC08<2><default><default><default>
nand0_d1 = port:PC09<2><default><default><default>
nand0_d2 = port:PC10<2><default><default><default>
nand0_d3 = port:PC11<2><default><default><default>
nand0_d4 = port:PC12<2><default><default><default>
nand0_d5 = port:PC13<2><default><default><default>
nand0_d6 = port:PC14<2><default><default><default>
nand0_d7 = port:PC15<2><default><default><default>
nand0_ce2 = port:PC17<2><default><default><default>
nand0_ce3 = port:PC18<2><default><default><default>
nand0_ndqs = port:PC16<2><default><default><default>
[nand1_para]
nand1_used = 0
nand1_we = port:PC00<2><default><default><default>
nand1_ale = port:PC01<2><default><default><default>
nand1_cle = port:PC03<2><default><default><default>
nand1_ce1 = port:PC03<2><default><default><default>
nand1_ce0 = port:PC04<2><default><default><default>
nand1_nre = port:PC05<2><default><default><default>
nand1_rb0 = port:PC06<2><default><default><default>
nand1_rb1 = port:PC07<2><default><default><default>
nand1_d0 = port:PC08<2><default><default><default>
nand1_d1 = port:PC09<2><default><default><default>
nand1_d2 = port:PC10<2><default><default><default>
nand1_d3 = port:PC11<2><default><default><default>
nand1_d4 = port:PC12<2><default><default><default>
nand1_d5 = port:PC13<2><default><default><default>
nand1_d6 = port:PC14<2><default><default><default>
nand1_d7 = port:PC15<2><default><default><default>
nand1_ce2 = port:PC17<2><default><default><default>
nand1_ce3 = port:PC18<2><default><default><default>
nand1_ndqs = port:PC16<2><default><default><default>
;----------------------------------------------------------------------------------
;disp init configuration
;
;disp_mode (0:screen0<screen0,fb0>)
;screenx_output_type (0:none; 1:lcd; 3:hdmi;)
;screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
; (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
;fbx format (0:ARGB 1:ABGR 2:RGBA 3:BGRA)
;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
;lcdx_backlight (lcd init backlight,the range:[0,256],default:197
;lcdx_yy (lcd init screen bright/contrast/saturation/hue, value:0~100, default:50/50/57/50)
;----------------------------------------------------------------------------------
[disp_init]
disp_composer_mode = 1
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 1
screen0_output_mode = 1
screen1_output_type = 3
screen1_output_mode = 10
fb0_format = 0
fb0_scaler_mode_enable = 0
fb0_width = 0
fb0_height = 0
fb1_format = 0
fb1_scaler_mode_enable = 0
fb1_width = 0
fb1_height = 0
lcd0_backlight = 197
lcd1_backlight = 197
lcd0_bright = 50
lcd0_contrast = 50
lcd0_saturation = 57
lcd0_hue = 50
lcd1_bright = 50
lcd1_contrast = 50
lcd1_saturation = 57
lcd1_hue = 50
;----------------------------------------------------------------------------------
;lcd0 configuration
;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp
;lcd_x: lcd horizontal resolution
;lcd_y: lcd vertical resolution
;lcd_width: width of lcd in mm
;lcd_height: height of lcd in mm
;lcd_dclk_freq: in MHZ unit
;lcd_pwm_freq: in HZ unit
;lcd_pwm_pol: lcd backlight PWM polarity
;lcd_pwm_max_limit lcd backlight PWM max limit(<=255)
;lcd_hbp: hsync back porch
;lcd_ht: hsync total cycle
;lcd_vbp: vsync back porch
;lcd_vt: vysnc total cycle
;lcd_hspw: hsync plus width
;lcd_vspw: vysnc plus width
;lcd_lvds_if: 0:single link; 1:dual link
;lcd_lvds_colordepth: 0:8bit; 1:6bit
;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_gamma_en lcd gamma correction enable
;lcd_bright_curve_en lcd bright curve correction enable
;lcd_cmap_en lcd color map function enable
;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than 10inch)
;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10;
; decrease it while lcd is not bright enough; increase while lcd is too bright
;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch)
;vga_used if need vga,lcd_used must be 1,in that case,vga_used is 1 means output to vga
;----------------------------------------------------------------------------------
[lcd0_para]
lcd_used = 1
vga_used = 1
lcd_driver_name = "default_lcd"
lcd_if = 0
lcd_x = 1024
lcd_y = 768
lcd_width = 150
lcd_height = 94
lcd_dclk_freq = 65
lcd_pwm_used = 0
lcd_pwm_ch = 0
lcd_pwm_freq = 50000
lcd_pwm_pol = 0
lcd_hbp = 296
lcd_ht = 1344
lcd_hspw = 136
lcd_vbp = 35
lcd_vt = 806
lcd_vspw = 6
lcd_lvds_if = 0
lcd_lvds_colordepth = 0
lcd_lvds_mode = 0
lcd_frm = 0
lcd_hv_clk_phase = 0
lcd_hv_sync_polarity = 0
lcd_gamma_en = 0
lcd_bright_curve_en = 0
lcd_cmap_en = 0
deu_mode = 0
lcdgamma4iep = 22
smart_color = 90
;lcd_bl_en = port:PA6<1><0><default><1>
lcd_power = port:power2<1><0><default><1>
lcdd0 = port:PD00<2><0><default><default>
lcdd1 = port:PD01<2><0><default><default>
lcdd2 = port:PD02<2><0><default><default>
lcdd3 = port:PD03<2><0><default><default>
lcdd4 = port:PD04<2><0><default><default>
lcdd5 = port:PD05<2><0><default><default>
lcdd6 = port:PD06<2><0><default><default>
lcdd7 = port:PD07<2><0><default><default>
lcdd8 = port:PD08<2><0><default><default>
lcdd9 = port:PD09<2><0><default><default>
lcdd10 = port:PD10<2><0><default><default>
lcdd11 = port:PD11<2><0><default><default>
lcdd12 = port:PD12<2><0><default><default>
lcdd13 = port:PD13<2><0><default><default>
lcdd14 = port:PD14<2><0><default><default>
lcdd15 = port:PD15<2><0><default><default>
lcdd16 = port:PD16<2><0><default><default>
lcdd17 = port:PD17<2><0><default><default>
lcdd18 = port:PD18<2><0><default><default>
lcdd19 = port:PD19<2><0><default><default>
lcdd20 = port:PD20<2><0><default><default>
lcdd21 = port:PD21<2><0><default><default>
lcdd22 = port:PD22<2><0><default><default>
lcdd23 = port:PD23<2><0><default><default>
lcdclk = port:PD24<2><0><default><default>
lcdde = port:PD25<2><0><default><default>
lcdhsync = port:PD26<2><0><3><default>
lcdvsync = port:PD27<2><0><3><default>
;----------------------------------------------------------------------------------
;hdmi configuration
;----------------------------------------------------------------------------------
[hdmi_para]
hdmi_used = 1
;----------------------------------------------------------------------------------
;pwm config
;----------------------------------------------------------------------------------
[pwm0_para]
pwm_used = 0
pwm_positive = port:PH6<2><0><default><default>
[pwm1_para]
pwm_used = 0
pwm_positive = port:PH8<3><0><default><default>
;--------------------------------------------------------------------------------
;vip (video input port) configuration
;vip_used: 0:disable 1:enable
;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer
;vip_dev_qty: The quantity of devices linked to capture bus
;
;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and
; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured!
;
;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,vip_dev(x)_pos must be configured!
;
;vip_dev(x)_isp_used 0:not use isp 1:use isp
;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply
;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
;x indicates the index of the devices which are linked to the same capture bus
;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
;fill handle string as below:
;axp22_eldo3
;axp22_dldo4
;axp22_eldo2
;fill handle string "" when not using any pmu power supply
;--------------------------------------------------------------------------------
[csi0]
vip_used = 0
vip_mode = 0
vip_dev_qty = 1
vip_define_sensor_list = 0
vip_csi_mck = port:PB14<3><default><default><default>
vip_csi_sck = port:PB15<3><default><default><default>
vip_csi_sda = port:PB16<3><default><default><default>
vip_dev0_mname = "ov16825"
vip_dev0_pos = "rear"
vip_dev0_lane = 1
vip_dev0_twi_id = 0
vip_dev0_twi_addr = 0x6c
vip_dev0_isp_used = 1
vip_dev0_fmt = 1
vip_dev0_stby_mode = 0
vip_dev0_vflip = 0
vip_dev0_hflip = 0
vip_dev0_iovdd = "axp22_aldo2"
vip_dev0_iovdd_vol = 2800000
vip_dev0_avdd = "axp15_aldo2"
vip_dev0_avdd_vol = 2800000
vip_dev0_dvdd = "axp22_eldo1"
vip_dev0_dvdd_vol = 1500000
vip_dev0_afvdd = "axp15_cldo2"
vip_dev0_afvdd_vol = 2800000
vip_dev0_power_en =
vip_dev0_reset = port:PB5<1><default><default><default>
vip_dev0_pwdn = port:PB6<1><default><default><default>
vip_dev0_flash_en =
vip_dev0_flash_mode =
vip_dev0_af_pwdn =
vip_dev0_act_used = 1
vip_dev0_act_name = "dw9714_act"
vip_dev0_act_slave = 0x18
vip_dev1_mname = ""
vip_dev1_pos = "front"
vip_dev1_lane = 1
vip_dev1_twi_id = 0
vip_dev1_twi_addr =
vip_dev1_isp_used = 0
vip_dev1_fmt = 1
vip_dev1_stby_mode = 0
vip_dev1_vflip = 0
vip_dev1_hflip = 0
vip_dev1_iovdd = "axp22_eldo3"
vip_dev1_iovdd_vol = 2800000
vip_dev1_avdd = "axp22_dldo4"
vip_dev1_avdd_vol = 2800000
vip_dev1_dvdd = "axp22_eldo2"
vip_dev1_dvdd_vol = 1500000
vip_dev1_afvdd = ""
vip_dev1_afvdd_vol = 2800000
vip_dev1_power_en =
vip_dev1_reset =
vip_dev1_pwdn =
vip_dev1_flash_en =
vip_dev1_flash_mode =
vip_dev1_af_pwdn =
[csi1]
vip_used = 0
;--------------------------------------------------------------------------------
;tv configuration
;
;--------------------------------------------------------------------------------
[tvout_para]
tvout_used =
tvout_channel_num =
tv_en =
[tvin_para]
tvin_used =
tvin_channel_num =
;--------------------------------------------------------------------------------
; SDMMC PINS MAPPING |
; ------------------------------------------------------------------------------|
; Config Guide |
; sdc_used: 1-enable card, 0-disable card |
; sdc_detmode: card detect mode |
; 1-detect card by gpio polling |
; 2-detect card by gpio irq(must use IO with irq function) |
; 3-no detect, always in for boot card |
; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert|
; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit |
; sdc_use_wp: 1-with write protect IO, 0-no write protect IO |
; sdc_isio: for sdio card |
; sdc_regulator: power control.if card supports UHS-I/DDR and HS200 timing for|
; SD3.0 or eMMC4.5, regulator must be configured. the value is |
; the ldo name of AXP221, eg: sdc_regulator = "axp22_eldo2" |
; other: GPIO Mapping configuration |
; ------------------------------------------------------------------------------|
; Note: |
; 1 if detmode=2, sdc_det's config=6 |
; else if detmode=1, sdc_det's config=0 |
; else sdc_det IO is not necessary |
; 2 if the customer wants to support UHS-I and HS200 features, he must provide|
; an independent power supply for the card. This is only used in platforms |
; that supports SD3.0 cards and eMMC4.4+ flashes |
;--------------------------------------------------------------------------------
[mmc0_para]
sdc_used = 1
sdc_detmode = 2
sdc_buswidth = 4
sdc_clk = port:PF02<2><1><2><default>
sdc_cmd = port:PF03<2><1><2><default>
sdc_d0 = port:PF01<2><1><2><default>
sdc_d1 = port:PF00<2><1><2><default>
sdc_d2 = port:PF05<2><1><2><default>
sdc_d3 = port:PF04<2><1><2><default>
sdc_det = port:PH18<6><1><2><default>
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[mmc1_para]
sdc_used = 1
sdc_detmode = 4
sdc_buswidth = 4
sdc_clk = port:PG00<2><1><2><default>
sdc_cmd = port:PG01<2><1><2><default>
sdc_d0 = port:PG02<2><1><2><default>
sdc_d1 = port:PG03<2><1><2><default>
sdc_d2 = port:PG04<2><1><2><default>
sdc_d3 = port:PG05<2><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 1
sdc_regulator = "none"
[mmc2_para]
sdc_used = 1
sdc_detmode = 3
sdc_buswidth = 8
sdc_clk = port:PC07<3><1><2><default>
sdc_cmd = port:PC06<3><1><2><default>
sdc_d0 = port:PC08<3><1><2><default>
sdc_d1 = port:PC09<3><1><2><default>
sdc_d2 = port:PC10<3><1><2><default>
sdc_d3 = port:PC11<3><1><2><default>
sdc_d4 = port:PC12<3><1><2><default>
sdc_d5 = port:PC13<3><1><2><default>
sdc_d6 = port:PC14<3><1><2><default>
sdc_d7 = port:PC15<3><1><2><default>
emmc_rst = port:PC16<3><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[mmc3_para]
sdc_used = 0
sdc_detmode = 4
sdc_buswidth = 8
sdc_clk = port:PC07<3><1><2><default>
sdc_cmd = port:PC06<3><1><2><default>
sdc_d0 = port:PC08<3><1><2><default>
sdc_d1 = port:PC09<3><1><2><default>
sdc_d2 = port:PC10<3><1><2><default>
sdc_d3 = port:PC11<3><1><2><default>
sdc_d4 = port:PC12<3><1><2><default>
sdc_d5 = port:PC13<3><1><2><default>
sdc_d6 = port:PC14<3><1><2><default>
sdc_d7 = port:PC15<3><1><2><default>
emmc_rst = port:PC16<3><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
; ------------------------------------------------------------------------------|
; sim card configuration
;--------------------------------------------------------------------------------
[smc_para]
smc_used =
smc_rst =
smc_vppen =
smc_vppp =
smc_det =
smc_vccen =
smc_sck =
smc_sda =
;--------------------------------
;[usbc0]：控制器0的配置。
;usb_used：USB使能标志。置1，表示系统中USB模块可用,置0,则表示系统USB禁用。
;usb_port_type：USB端口的使用情况。 0：device only;1：host only;2：OTG
;usb_detect_type：USB端口的检查方式。0：不做检测;1：vbus/id检查;2：id/dpdm检查
;usb_id_gpio：USB ID pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio：USB DET_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_drv_vbus_gpio：USB DRY_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio: "axp_ctrl",表示axp 提供
;usb_restrict_gpio usb限流控制pin
;usb_restric_flag: usb限流标置
;--------------------------------
;--------------------------------
;--- USB0控制标志
;--------------------------------
[usbc0]
usb_used = 1
usb_port_type = 2
usb_detect_type = 1
usb_id_gpio = port:PH16<0><1><default><default>
usb_det_vbus_gpio = "axp_ctrl"
usb_drv_vbus_gpio = port:power4<1><0><default><1>
usb_restrict_gpio =
usb_host_init_state = 1
usb_restric_flag =
usb_restric_voltage = 3550000
usb_restric_capacity= 5
;--------------------------------
;--- USB1控制标志
;--------------------------------
[usbc1]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_drv_vbus_gpio = port:PH14<1><0><default><0>
usb_restrict_gpio =
usb_host_init_state = 1
usb_restric_flag = 0
;--------------------------------
;--- USB2控制标志
;--------------------------------
[usbc2]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_drv_vbus_gpio = port:PH15<1><0><default><0>
usb_restrict_gpio =
usb_host_init_state = 1
usb_restric_flag = 0
;--------------------------------
;--- USB3控制标志
;--------------------------------
[usbc3]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_drv_vbus_gpio =
usb_restrict_gpio =
usb_host_init_state = 1
usb_restric_flag = 0
;--------------------------------
;--- USB Device
;--------------------------------
[usb_feature]
vendor_id = 0x18D1
mass_storage_id = 0x0001
adb_id = 0x0002
manufacturer_name = "USB Developer"
product_name = "Android"
serial_number = "20080411"
[msc_feature]
vendor_name = "USB 2.0"
product_name = "USB Flash Driver"
release = 100
luns = 3
[serial_feature]
serial_unique = 0
;--------------------------------------------------------------------------------
; G sensor configuration
; gs_twi_id --- TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2)
;--------------------------------------------------------------------------------
[gsensor_para]
gsensor_used = 0
gsensor_twi_id = 1
gsensor_twi_addr = 0x18
gsensor_int1 = port:PH17<6><1><default><default>
gsensor_int2 =
;--------------------------------------------------------------------------------
; G sensor automatic detection configuration
;gsensor_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[gsensor_list_para]
gsensor_det_used = 1
bma250 = 1
mma8452 = 1
mma7660 = 1
mma865x = 1
afa750 = 1
lis3de_acc = 1
lis3dh_acc = 1
kxtik = 1
dmard10 = 0
dmard06 = 1
mxc622x = 1
fxos8700 = 1
lsm303d = 1
;--------------------------------------------------------------------------------
; gps gpio configuration
; gps_spi_id --- the index of SPI controller. 0: SPI0, 1: SPI1, 2: SPI2, 15: no SPI used
; gps_spi_cs_num --- the chip select number of SPI controller. 0: SPI CS0, 1: SPI CS1
; gps_lradc --- the lradc number for GPS used. 0 and 1 is valid, set 2 if not use lradc
;--------------------------------------------------------------------------------
[gps_para]
;--------------------------------------------------------------------------------
;wifi configuration
;wifi_sdc_id --- 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
;wifi_usbc_id --- 0- USB0, 1- USB1, 2- USB2, 3- USB3
;wifi_mod_sel --- 0- none, 1- rtl8188eu, 2- rtl8723bs(wifi+bt),
; 3 - ap6181, 4- ap6210(wifi+bt), 5 - ap6330(wifi+bt)
;--------------------------------------------------------------------------------
[wifi_para]
wifi_used = 1
wifi_sdc_id = 1
wifi_usbc_id = 1
wifi_usbc_type = 1
wifi_mod_sel = 5
wifi_power = "axp22_dldo1"
wifi_power_ext1 = "axp15_cldo3"
wifi_power_ext2 = "axp22_ldoio0"
sdio_power = ""
; 1 - rtl8188eu usb wifi gpio conifg
;rtl8188eu_power = port:PH27<1><0><default><0>
; 2 - rtl8723bs sdio wifi + bt gpio config
rtl8723bs_chip_en = port:PL09<1><default><default><0>
rtl8723bs_wl_regon = port:PL02<1><default><default><0>
rtl8723bs_wl_host_wake = port:PL03<4><default><default><0>
rtl8723bs_bt_regon = port:PL05<1><default><default><0>
rtl8723bs_bt_wake = port:PL08<1><default><default><0>
rtl8723bs_bt_host_wake = port:PL04<4><default><default><0>
rtl8723bs_lpo_use_apclk = 0
; 3 - ap6181 sdio wifi gpio config
; 4 - ap6210 sdio wifi + bt gpio config
; 5 - ap6330 sdio wifi + bt gpio config
ap6xxx_wl_regon = port:PL02<1><default><default><0>
ap6xxx_wl_host_wake = port:PL03<0><default><default><0>
ap6xxx_bt_regon = port:PL05<1><default><default><0>
ap6xxx_bt_wake = port:PL08<1><default><default><0>
ap6xxx_bt_host_wake = port:PL04<0><default><default><0>
ap6xxx_lpo_use_apclk = 2
;--------------------------------------------------------------------------------
;3G configuration
;--------------------------------------------------------------------------------
[3g_para]
3g_used = 0
3g_usbc_num = 3
3g_uart_num = 4
bb_name = "mu509"
bb_vbat =
bb_on = port:PM02<1><default><default><0>
bb_pwr_on = port:PM03<1><default><default><0>
bb_wake = port:PM04<1><default><default><0>
bb_rf_dis = port:PM15<1><default><default><0>
bb_rst = port:PM00<1><default><default><0>
bb_dldo = "axp22_sw0"
bb_dldo_min_uV = 5000000
bb_dldo_max_uV = 5000000
;--------------------------------------------------------------------------------
;gyroscope
;--------------------------------------------------------------------------------
[gy_para]
gy_used = 1
gy_twi_id = 1
gy_twi_addr = 0x6a
gy_int1 = port:PH15<6><1><default><default>
gy_int2 =
;--------------------------------------------------------------------------------
; Gyro automatic detection configuration
;gy_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[gy_list_para]
gy_det_used = 0
l3gd20_gyr = 1
;--------------------------------------------------------------------------------
;light sensor
;--------------------------------------------------------------------------------
[ls_para]
ls_used = 0
ls_twi_id = 1
ls_twi_addr = 0x23
ls_int = port:PH17<6><1><default><default>
;--------------------------------------------------------------------------------
; lsensor automatic detection configuration
;ls_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[ls_list_para]
ls_det_used = 0
ltr_501als = 1
;--------------------------------------------------------------------------------
;compass
;--------------------------------------------------------------------------------
[compass_para]
compass_used = 0
compass_twi_id = 1
compass_twi_addr = 0x0d
compass_int =
;--------------------------------------------------------------------------------
;led
;--------------------------------------------------------------------------------
[leds_para]
leds_used = 1
leds_num = 2
leds_pin_1 = port:PH06<1><default><default><0>
leds_name_1 = "red:ph06:led1"
leds_default_1 = 0
leds_trigger_1 = "heartbeat"
leds_pin_2 = port:PH17<1><default><default><0>
leds_name_2 = "green:ph17:led2"
leds_default_2 = 0
leds_trigger_2 = "cpu0"
;--------------------------------------------------------------------------------
;blue tooth
;bt_used ---- blue tooth used (0- no used, 1- used)
;bt_uard_id ---- uart index
;--------------------------------------------------------------------------------
[bt_para]
bt_used = 1
bt_uart_id = 2
bt_wakeup =
bt_gpio =
bt_rst =
;--------------------------------------------------------------------------------
;daudio_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
;daudio_select:0 is pcm.1 is i2s
;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
;sample_resolution :16bits/20bits/24bits
;word_select_size :16bits/20bits/24bits/32bits
;pcm_sync_period :16/32/64/128/256
;msb_lsb_first :0: msb first; 1: lsb first
;sign_extend :0: zero pending; 1: sign extend
;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
;slot_width :8 bit width / 16 bit width
;frame_width :0: long frame = 2 clock width; 1: short frame
;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;--------------------------------------------------------------------------------
[s_i2s1]
daudio_used = 1
daudio_master = 4
daudio_select = 1
audio_format = 1
signal_inversion = 1
mclk_fs = 512
sample_resolution = 16
slot_width_select = 16
;pcm_sync_period = 256
pcm_lrck_period = 32
pcm_lrckr_period = 1
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
frame_width = 0
tx_data_mode = 0
rx_data_mode = 0
s_i2s1_lrckr = port:PM04<3><1><default><default>
s_i2s1_dout1 = port:PM05<3><1><default><default>
s_i2s1_dout2 = port:PM06<3><1><default><default>
s_i2s1_dout3 = port:PM07<3><1><default><default>
s_i2s1_mclk = port:PM10<3><1><default><default>
s_i2s1_bclk = port:PM11<3><1><default><default>
s_i2s1_lrclk = port:PM12<3><1><default><default>
s_i2s1_din = port:PM13<3><1><default><default>
s_i2s1_dout0 = port:PM14<3><1><default><default>
[audio0]
audio_int_ctrl = port:PL9<6><default><default><0>
audio_pa_ctrl = port:PA16<1><default><default><0>
audio_hp_det = port:PM00<0><default><default><0>
aif3_voltage = "axp15_cldo3"
Digital_bb_cap_keytone_used = 0
;speaker_val = 0x1b
headset_val = 0x3b
single_speaker_val = 0x19
double_speaker_val = 0x1b
speaker_double_used = 1
[spdif0]
spdif_used = 0
spdif_dout = port:PH18<3><1><default><default>
spdif_din = port:PH17<3><1><default><default>
spdif_voltage = "axp22_dcdc1"
;----------------------------------------------------------------------------------
;ir rx --- infra remote configuration
;----------------------------------------------------------------------------------
[s_cir0]
ir_used = 1
ir_rx = port:PL06<3><1><default><default>
ir_power_key_code = 0x0
ir_addr_code = 0x0
;----------------------------------------------------------------------------------
;ir tx--- infra remote configuration
;----------------------------------------------------------------------------------
[cir]
ir_used = 1
ir_tx = port:PH07<2><default><default><default>
;-------------------------------------------------------------------------------------
;pmu_used ---0:not used,1:used
;pmu_twi_addr ---slave address
;pmu_twi_id ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3)
;pmu_irq_id ---irq number (0 irq0,1 irq1,……)
;pmu_battery_rdc ---battery initial resistance
;pmu_battery_cap ---battery capability,mAh
;pmu_batdeten ---battery detect en;0:disable 1:enable
;pmu_runtime_chgcur ---set initial charging current limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_earlysuspend_chgcur ---set earlysuspend charging current limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_suspend_chgcur ---set suspend charging current limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_shutdown_chgcur ---set shutdown charging current limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_init_chgvol ---set initial charing target voltage,mV,4100/4220/4200/4240
;pmu_init_chgend_rate ---set initial charing end current rate,10/15
;pmu_init_chg_enabled ---set initial charing enabled,0:disable,1:enable
;pmu_init_adc_freq ---set initial adc frequency,Hz,100/200/400/800
;pmu_init_adcts_freq ---set initial adc TS,Hz,100/200/400/800
;pmu_init_chg_pretime ---set initial pre-charging time,min,40/50/60/70
;pmu_init_chg_csttime ---set initial constance-charging time,min,360/480/600/720
;pmu_batt_cap_correct ---correct the battery capacity or not when one charge cycle 0:not correct 1:correct
;pmu_bat_regu_en ---bat regulator is enable or not when charge done 0:disable 1:enable
;pmu_bat_para1 ---battery indication at 3.13V
;pmu_bat_para2 ---battery indication at 3.27V
;pmu_bat_para3 ---battery indication at 3.34V
;pmu_bat_para4 ---battery indication at 3.41V
;pmu_bat_para5 ---battery indication at 3.48V
;pmu_bat_para6 ---battery indication at 3.52V
;pmu_bat_para7 ---battery indication at 3.55V
;pmu_bat_para8 ---battery indication at 3.57V
;pmu_bat_para9 ---battery indication at 3.59V
;pmu_bat_para10 ---battery indication at 3.61V
;pmu_bat_para11 ---battery indication at 3.63V
;pmu_bat_para12 ---battery indication at 3.64V
;pmu_bat_para13 ---battery indication at 3.66V
;pmu_bat_para14 ---battery indication at 3.7V
;pmu_bat_para15 ---battery indication at 3.73V
;pmu_bat_para16 ---battery indication at 3.77V
;pmu_bat_para17 ---battery indication at 3.78V
;pmu_bat_para18 ---battery indication at 3.8V
;pmu_bat_para19 ---battery indication at 3.82V
;pmu_bat_para20 ---battery indication at 3.84V
;pmu_bat_para21 ---battery indication at 3.85V
;pmu_bat_para22 ---battery indication at 3.87V
;pmu_bat_para23 ---battery indication at 3.91V
;pmu_bat_para24 ---battery indication at 3.94V
;pmu_bat_para25 ---battery indication at 3.98V
;pmu_bat_para26 ---battery indication at 4.01V
;pmu_bat_para27 ---battery indication at 4.05V
;pmu_bat_para28 ---battery indication at 4.08V
;pmu_bat_para29 ---battery indication at 4.1V
;pmu_bat_para30 ---battery indication at 4.12V
;pmu_bat_para31 ---battery indication at 4.14V
;pmu_bat_para32 ---battery indication at 4.15V
;pmu_usbvol_limit ---set usb-ac limited voltage enable,1:enable，0：disable
;pmu_usbcur_limit ---set usb-ac limited current enable,1:enable，0：disable
;pmu_usbvol ---set usb-ac limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbcur ---set usb-ac limited current level,mA,500/900, 0 - not limite
;pmu_usbvol_pc ---set usb-pc limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbcur_pc ---set usb-pc limited current level,mA,500/900, 0 - not limite
;pmu_pwroff_vol ---set protect voltage when system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
;pmu_pwron_vol ---set protect voltage after system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
;pmu_pekoff_time ---set pek off time,ms, 4000/6000/8000/10000
;pmu_pekoff_func ---set pek off func, 0:shutdown,1:restart
;pmu_pekoff_en ---set pek offlevel powerdown or not, 0:not powerdown,1:powerdown
;pmu_pekoff_delay_time ---set pek off delay time s, 0/10/20/30/40/50/60/70
;pmu_peklong_time ---set pek pek long irq time,ms,1000/1500/2000/2500
;pmu_pekon_time ---set pek on time,ms,128/1000/2000/3000
;pmu_pwrok_time ---set pmu pwrok delay time,ms,8/16/32/64
;pmu_pwrok_shutdown_en ---set pwrok 6s shutdown enable
;pmu_battery_warning_level1 ---low power warning high level,5%-20%,1%/step
;pmu_battery_warning_level2 ---low power warning low level,0%-15%,1%/step
;pmu_restvol_time ---battery indicaton reflash time,30/60/120/
;pmu_ocv_cou_adjust_time ---ocv battery indication reflash time,60/120/30
;pmu_chgled_func ---CHGKED pin control，0:controlled by pmu,1:controlled by Charger
;pmu_chgled_type ---CHGLED Type select when pmu_chgled_func=0,0:Type A，1：Type B
;pmu_vbusen_func ---N_VBUSEN function select,0:as an output,1:as an input
;pmu_reset ---when power key press longer than 16's,PMU reset or not.0:not reset 1:reset
;pmu_IRQ_wakeup ---press IRQ wakeup or not when sleep or power down.0:not wakeup 1:wakeup
;pmu_hot_shutdowm ---when PMU over temperature protect or not;0:disable 1:enable
;pmu_inshort ---ACIN and VBUS inshort or not by software;0:auto detect 1:inshort
;pmu_charge_ltf ---
;pmu_charge_htf ---
;pmu_discharge_ltf ---
;pmu_discharge_htf ---
;pmu_temp_para1 --- temp -25 voltage
;pmu_temp_para2 --- temp -15 voltage
;pmu_temp_para3 --- temp -10 voltage
;pmu_temp_para4 --- temp -5 voltage
;pmu_temp_para5 --- temp 0 voltage
;pmu_temp_para6 --- temp 5 voltage
;pmu_temp_para7 --- temp 10 voltage
;pmu_temp_para8 --- temp 20 voltage
;pmu_temp_para9 --- temp 30 voltage
;pmu_temp_para10 --- temp 40 voltage
;pmu_temp_para11 --- temp 45 voltage
;pmu_temp_para12 --- temp 50 voltage
;pmu_temp_para13 --- temp 55 voltage
;pmu_temp_para14 --- temp 60 voltage
;pmu_temp_para15 --- temp 70 voltage
;pmu_temp_para16 --- temp 80 voltage
;--------------------------------------------------------------------------------------------------------
;--------------------------------------------------------------------------------------------------------
;pmu1 is axp22
;--------------------------------------------------------------------------------------------------------
[pmu1_para]
pmu_used = 1
pmu_twi_addr = 0x34
pmu_twi_id = 0
pmu_irq_id = 0
pmu_battery_rdc = 100
pmu_battery_cap = 0
pmu_batdeten = 1
pmu_runtime_chgcur = 900
pmu_earlysuspend_chgcur = 900
pmu_suspend_chgcur = 1500
pmu_shutdown_chgcur = 1500
pmu_init_chgvol = 4200
pmu_init_chgend_rate = 15
pmu_init_chg_enabled = 1
pmu_init_adc_freq = 800
pmu_init_adcts_freq = 800
pmu_init_chg_pretime = 70
pmu_init_chg_csttime = 720
pmu_batt_cap_correct = 1
pmu_bat_regu_en = 0
pmu_bat_para1 = 0
pmu_bat_para2 = 0
pmu_bat_para3 = 0
pmu_bat_para4 = 0
pmu_bat_para5 = 0
pmu_bat_para6 = 0
pmu_bat_para7 = 0
pmu_bat_para8 = 0
pmu_bat_para9 = 5
pmu_bat_para10 = 8
pmu_bat_para11 = 9
pmu_bat_para12 = 10
pmu_bat_para13 = 13
pmu_bat_para14 = 16
pmu_bat_para15 = 20
pmu_bat_para16 = 33
pmu_bat_para17 = 41
pmu_bat_para18 = 46
pmu_bat_para19 = 50
pmu_bat_para20 = 53
pmu_bat_para21 = 57
pmu_bat_para22 = 61
pmu_bat_para23 = 67
pmu_bat_para24 = 73
pmu_bat_para25 = 78
pmu_bat_para26 = 84
pmu_bat_para27 = 88
pmu_bat_para28 = 92
pmu_bat_para29 = 93
pmu_bat_para30 = 94
pmu_bat_para31 = 95
pmu_bat_para32 = 100
pmu_usbvol_limit = 0
pmu_usbcur_limit = 0
pmu_usbvol = 4000
pmu_usbcur = 0
pmu_usbvol_pc = 4400
pmu_usbcur_pc = 500
pmu_pwroff_vol = 3300
pmu_pwron_vol = 2600
pmu_pekoff_time = 6000
pmu_pekoff_func = 0
pmu_pekoff_en = 1
pmu_pekoff_delay_time = 0
pmu_peklong_time = 1500
pmu_pekon_time = 1000
pmu_pwrok_time = 64
pmu_pwrok_shutdown_en = 0
pmu_battery_warning_level1 = 15
pmu_battery_warning_level2 = 0
pmu_restvol_adjust_time = 60
pmu_ocv_cou_adjust_time = 60
pmu_chgled_func = 0
pmu_chgled_type = 0
pmu_vbusen_func = 1
pmu_reset = 0
pmu_IRQ_wakeup = 0
pmu_hot_shutdowm = 1
pmu_inshort = 0
power_start = 1
pmu_temp_enable = 0
pmu_charge_ltf = 2261
pmu_charge_htf = 388
pmu_discharge_ltf = 3200
pmu_discharge_htf = 237
pmu_temp_para1 = 7466
pmu_temp_para2 = 4480
pmu_temp_para3 = 3518
pmu_temp_para4 = 2786
pmu_temp_para5 = 2223
pmu_temp_para6 = 1788
pmu_temp_para7 = 1448
pmu_temp_para8 = 969
pmu_temp_para9 = 664
pmu_temp_para10 = 466
pmu_temp_para11 = 393
pmu_temp_para12 = 333
pmu_temp_para13 = 283
pmu_temp_para14 = 242
pmu_temp_para15 = 179
pmu_temp_para16 = 134
;--------------------------------------------------------------------------------------------------------
;pmu2 is axp15
;pmu_used ---0:not used,1:used
;pmu_twi_addr ---slave address
;pmu_twi_id ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3)
;pmu_irq_id ---irq number (0 irq0,1 irq1)
;pmu_hot_shutdowm ---when PMU over temperature protect or not;0:disable 1:enable
;--------------------------------------------------------------------------------------------------------
[pmu2_para]
pmu_used = 1
pmu_twi_addr = 0x34
pmu_twi_id = 1
pmu_irq_id = 0
pmu_hot_shutdowm = 1
;----------------------------------------------------------------------------------
; dvfs voltage-frequency table configuration
;
; there are two clusters, cluster0 and cluster1, they have diffrent configuration
; on frequency and voltage.
;
; max_freq: cpu maximum frequency, based on Hz
; min_freq: cpu minimum frequency, based on Hz
;
; LV_count: count of LV_freq/LV_volt, must be < 16
;
; L_LV1: core vdd is 1.02v if cpu frequency is (1128Mhz, 1200Mhz]
; L_LV2: core vdd is 0.96v if cpu frequency is (1008Mhz, 1128Mhz]
; L_LV3: core vdd is 0.90v if cpu frequency is ( 864Mhz, 1008Mhz]
; L_LV4: core vdd is 0.84v if cpu frequency is ( 0Mhz, 864Mhz]
; L_LV5: core vdd is 0.84v if cpu frequency is ( 0Mhz, 864Mhz]
; L_LV6: core vdd is 0.84v if cpu frequency is ( 0Mhz, 864Mhz]
; L_LV7: core vdd is 0.84v if cpu frequency is ( 0Mhz, 864Mhz]
; L_LV8: core vdd is 0.84v if cpu frequency is ( 0Mhz, 864Mhz]
;
; B_LV1: core vdd is 1.08v if cpu frequency is (1608Mhz, 1800Mhz]
; B_LV2: core vdd is 1.00v if cpu frequency is (1536Mhz, 1608Mhz]
; B_LV3: core vdd is 0.96v if cpu frequency is (1440Mhz, 1536Mhz]
; B_LV4: core vdd is 0.90v if cpu frequency is (1296Mhz, 1440Mhz]
; B_LV5: core vdd is 0.84v if cpu frequency is ( 0Mhz, 1296Mhz]
; B_LV6: core vdd is 0.84v if cpu frequency is ( 0Mhz, 1296Mhz]
; B_LV7: core vdd is 0.84v if cpu frequency is ( 0Mhz, 1296Mhz]
; B_LV8: core vdd is 0.84v if cpu frequency is ( 0Mhz, 1296Mhz]
;
;----------------------------------------------------------------------------------
[dvfs_table]
vf_table_count = 3
[vf_table0]
;little
L_max_freq = 1200000000
L_min_freq = 480000000
L_LV_count = 8
L_LV1_freq = 1200000000
L_LV1_volt = 1020
L_LV2_freq = 1104000000
L_LV2_volt = 960
L_LV3_freq = 1008000000
L_LV3_volt = 900
L_LV4_freq = 816000000
L_LV4_volt = 840
L_LV5_freq = 0
L_LV5_volt = 840
L_LV6_freq = 0
L_LV6_volt = 840
L_LV7_freq = 0
L_LV7_volt = 840
L_LV8_freq = 0
L_LV8_volt = 840
;big
B_max_freq = 1800000000
B_min_freq = 600000000
B_LV_count = 8
B_LV1_freq = 1800000000
B_LV1_volt = 1100
B_LV2_freq = 1608000000
B_LV2_volt = 1020
B_LV3_freq = 1416000000
B_LV3_volt = 960
B_LV4_freq = 1200000000
B_LV4_volt = 900
B_LV5_freq = 1008000000
B_LV5_volt = 840
B_LV6_freq = 0
B_LV6_volt = 840
B_LV7_freq = 0
B_LV7_volt = 840
B_LV8_freq = 0
B_LV8_volt = 840
[vf_table1]
;little
L_max_freq = 1200000000
L_min_freq = 480000000
L_LV_count = 8
L_LV1_freq = 1200000000
L_LV1_volt = 1060
L_LV2_freq = 1008000000
L_LV2_volt = 960
L_LV3_freq = 912000000
L_LV3_volt = 900
L_LV4_freq = 720000000
L_LV4_volt = 840
L_LV5_freq = 0
L_LV5_volt = 840
L_LV6_freq = 0
L_LV6_volt = 840
L_LV7_freq = 0
L_LV7_volt = 840
L_LV8_freq = 0
L_LV8_volt = 840
;big
B_max_freq = 1608000000
B_min_freq = 600000000
B_LV_count = 8
B_LV1_freq = 1800000000
B_LV1_volt = 1160
B_LV2_freq = 1608000000
B_LV2_volt = 1100
B_LV3_freq = 1416000000
B_LV3_volt = 1020
B_LV4_freq = 1320000000
B_LV4_volt = 960
B_LV5_freq = 1200000000
B_LV5_volt = 900
B_LV6_freq = 1008000000
B_LV6_volt = 840
B_LV7_freq = 0
B_LV7_volt = 840
B_LV8_freq = 0
B_LV8_volt = 840
[vf_table2]
;little
L_max_freq = 1200000000
L_min_freq = 480000000
L_LV_count = 8
L_LV1_freq = 1200000000
L_LV1_volt = 1020
L_LV2_freq = 1104000000
L_LV2_volt = 960
L_LV3_freq = 1008000000
L_LV3_volt = 900
L_LV4_freq = 816000000
L_LV4_volt = 840
L_LV5_freq = 0
L_LV5_volt = 840
L_LV6_freq = 0
L_LV6_volt = 840
L_LV7_freq = 0
L_LV7_volt = 840
L_LV8_freq = 0
L_LV8_volt = 840
;big
B_max_freq = 1800000000
B_min_freq = 600000000
B_LV_count = 8
B_LV1_freq = 1800000000
B_LV1_volt = 1100
B_LV2_freq = 1608000000
B_LV2_volt = 1020
B_LV3_freq = 1416000000
B_LV3_volt = 960
B_LV4_freq = 1200000000
B_LV4_volt = 900
B_LV5_freq = 1008000000
B_LV5_volt = 840
B_LV6_freq = 0
B_LV6_volt = 840
B_LV7_freq = 0
B_LV7_volt = 840
B_LV8_freq = 0
B_LV8_volt = 840
;----------------------------------------------------------------------------------
;virtual device
;virtual device for pinctrl testing
;device have pin PA1 PA2
;----------------------------------------------------------------------------------
[Vdevice]
Vdevice_used = 1
Vdevice_0 =
Vdevice_1 =
;----------------------------------------------------------------------------------
;s_uart0 config parameters
;s_uart_used --s_uart0 whether used for arisc debugging
;
;----------------------------------------------------------------------------------
[s_uart0]
s_uart_used = 1
s_uart_tx = port:PL00<3><default><default><default>
s_uart_rx = port:PL01<3><default><default><default>
;----------------------------------------------------------------------------------
;s_rsb0 config parameters
;s_rsb_used --s_rsb0 whether used for arisc
;
;----------------------------------------------------------------------------------
[s_rsb0]
s_rsb_used = 1
s_rsb_sck = port:PN00<3><1><2><default>
s_rsb_sda = port:PN01<3><1><2><default>
;----------------------------------------------------------------------------------
;s_jtag0 config parameters
;s_jtag0_used --s_jtag0 whether used for arisc
;
;----------------------------------------------------------------------------------
[s_jtag0]
s_jtag_used = 1
s_jtag_tms = port:PL02<3><1><2><default>
s_jtag_tck = port:PL03<3><1><2><default>
s_jtag_tdo = port:PL04<3><1><2><default>
s_jtag_tdi = port:PL05<3><1><2><default>
;----------------------------------------------------------------------------------
;s_powchk cpus power check
;s_powchk_used --power check whether used for arisc in super standby
; bit31:enable power updat, bit1:wakeup when power state exception
; bit0:wakeup when power consumption exception
;s_power_reg the expected regs stand for power on/off state
;s_system_power the limit maxmum power consumption when super standby (unit: mw)
;
;----------------------------------------------------------------------------------
[s_powchk]
s_powchk_used = 0x80000000
s_power_reg = 0x02309621
s_system_power = 50
;----------------------------------------------------------------------------------
; dram dvfs voltage-frequency table configuration
;
; LV_count: count of LV_freq/LV_volt
;
; LV1: core vdd is 0.90v if dram frequency is (360Mhz, 672Mhz]
; LV2: core vdd is 0.84v if dram frequency is ( 0Mhz, 168Mhz]
; LV3: core vdd is 0.84v if dram frequency is ( 0Mhz, 168Mhz]
;
;----------------------------------------------------------------------------------
[dram_dvfs_table]
LV_count = 3
LV1_freq = 672000000
LV1_volt = 900
LV2_freq = 168000000
LV2_volt = 840
LV3_freq = 0
LV3_volt = 840
;----------------------------------------------------------------------------------
; dram scene frequency table configuration
;
; LV_count: count of LV_scene/LV_freq
;
; LV0: dram frequency default is 672MHz in normal
; LV1: dram frequency default is 480MHz in home, supported for 480MHz/672MHz
; LV2: dram frequency default is 240MHz in video play, supported for 240MHz/336MHz/480MHz/672MHz
; LV3: dram frequency default is 168MHz in bgmusic play
; LV4: dram frequency default is 480MHz in 4K video play, supported for 480MHz/672MHz
;
;----------------------------------------------------------------------------------
[dram_scene_table]
LV_count = 5
LV0_scene = 0
LV0_freq = 672000000
LV1_scene = 1
LV1_freq = 480000000
LV2_scene = 2
LV2_freq = 240000000
LV3_scene = 3
LV3_freq = 168000000
LV4_scene = 4
LV4_freq = 480000000
Reference in New Issue View Git Blame Copy Permalink