Added new boards, altered sources, bugfixes
This commit is contained in:
Igor Pecovnik
parent
3a44ffd079
commit
cb45a5c6fe
134
boards.config
134
boards.config
@ -5,12 +5,12 @@
|
||||
|
||||
case $BOARD in
|
||||
|
||||
cubieboard | cubietruck)
|
||||
cubieboard2 | cubietruck)
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# Cubieboards 3.4.x
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
BOOTLOADER="https://github.com/patrickhwood/u-boot -b pat-cb2-ct"
|
||||
BOOTSOURCE="u-boot-sunxi"
|
||||
BOOTLOADER="https://github.com/patrickhwood/u-boot"
|
||||
BOOTSOURCE="u-boot-patwood"
|
||||
BOOTCONFIG="cubietruck"
|
||||
CPUMIN="480000"
|
||||
CPUMAX="1010000"
|
||||
@ -33,13 +33,65 @@ MISC4_DIR="$LINUXSOURCE/drivers/video/fbtft"
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
|
||||
|
||||
cubieboard-next)
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# Cubieboard mainline kernel / experimental
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
BOOTLOADER="https://github.com/RobertCNelson/u-boot"
|
||||
BOOTSOURCE="u-boot"
|
||||
BOOTCONFIG="Cubieboard_defconfig"
|
||||
CPUMIN="480000"
|
||||
CPUMAX="1010000"
|
||||
LINUXKERNEL="https://github.com/linux-sunxi/linux-sunxi -b sunxi-next"
|
||||
LINUXSOURCE="linux-sunxi-next"
|
||||
LOCALVERSION="-sunxi"
|
||||
DTBS="sun4i-a10-cubieboard.dtb"
|
||||
DOCS="https://github.com/igorpecovnik/Cubietruck-Debian.wiki.git"
|
||||
DOCSDIR="docs-banana"
|
||||
MISC1="https://github.com/linux-sunxi/sunxi-tools.git"
|
||||
MISC1_DIR="sunxi-tools"
|
||||
MISC2=""
|
||||
MISC2_DIR=""
|
||||
MISC3=""
|
||||
MISC3_DIR=""
|
||||
MISC4="https://github.com/notro/fbtft"
|
||||
MISC4_DIR="$LINUXSOURCE/drivers/video/fbtft"
|
||||
;;
|
||||
|
||||
|
||||
cubieboard2-next)
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# Cubieboard mainline kernel / experimental
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
BOOTLOADER="https://github.com/RobertCNelson/u-boot"
|
||||
BOOTSOURCE="u-boot"
|
||||
BOOTCONFIG="Cubieboard2_defconfig"
|
||||
CPUMIN="480000"
|
||||
CPUMAX="1010000"
|
||||
LINUXKERNEL="https://github.com/linux-sunxi/linux-sunxi -b sunxi-next"
|
||||
LINUXSOURCE="linux-sunxi-next"
|
||||
LOCALVERSION="-sunxi"
|
||||
DTBS="sun7i-a20-cubieboard2.dtb"
|
||||
DOCS="https://github.com/igorpecovnik/Cubietruck-Debian.wiki.git"
|
||||
DOCSDIR="docs-banana"
|
||||
MISC1="https://github.com/linux-sunxi/sunxi-tools.git"
|
||||
MISC1_DIR="sunxi-tools"
|
||||
MISC2=""
|
||||
MISC2_DIR=""
|
||||
MISC3=""
|
||||
MISC3_DIR=""
|
||||
MISC4="https://github.com/notro/fbtft"
|
||||
MISC4_DIR="$LINUXSOURCE/drivers/video/fbtft"
|
||||
;;
|
||||
|
||||
|
||||
cubietruck-next)
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# Cubieboards mainline kernel / experimental
|
||||
# Cubieboard mainline kernel / experimental
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
BOOTLOADER="https://github.com/jwrdegoede/u-boot-sunxi"
|
||||
BOOTSOURCE="u-boot-sunxi-next"
|
||||
BOOTCONFIG="Cubietruck_config"
|
||||
BOOTLOADER="https://github.com/RobertCNelson/u-boot"
|
||||
BOOTSOURCE="u-boot"
|
||||
BOOTCONFIG="Cubietruck_defconfig"
|
||||
CPUMIN="480000"
|
||||
CPUMAX="1010000"
|
||||
LINUXKERNEL="https://github.com/linux-sunxi/linux-sunxi -b sunxi-next"
|
||||
@ -52,8 +104,60 @@ MISC1="https://github.com/linux-sunxi/sunxi-tools.git"
|
||||
MISC1_DIR="sunxi-tools"
|
||||
MISC2=""
|
||||
MISC2_DIR=""
|
||||
MISC3="https://github.com/dz0ny/rt8192cu"
|
||||
MISC3_DIR="rt8192cu"
|
||||
MISC3=""
|
||||
MISC3_DIR=""
|
||||
MISC4="https://github.com/notro/fbtft"
|
||||
MISC4_DIR="$LINUXSOURCE/drivers/video/fbtft"
|
||||
;;
|
||||
|
||||
|
||||
lime2-next)
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# Olimex Lime mainline kernel / experimental
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
BOOTLOADER="https://github.com/RobertCNelson/u-boot"
|
||||
BOOTSOURCE="u-boot"
|
||||
BOOTCONFIG="A20-OLinuXino-Lime2_defconfig"
|
||||
CPUMIN="480000"
|
||||
CPUMAX="1010000"
|
||||
LINUXKERNEL="https://github.com/linux-sunxi/linux-sunxi -b sunxi-next"
|
||||
LINUXSOURCE="linux-sunxi-next"
|
||||
LOCALVERSION="-sunxi"
|
||||
DTBS="sun7i-a20-olinuxino-lime2.dtb"
|
||||
DOCS="https://github.com/igorpecovnik/Cubietruck-Debian.wiki.git"
|
||||
DOCSDIR="docs-banana"
|
||||
MISC1="https://github.com/linux-sunxi/sunxi-tools.git"
|
||||
MISC1_DIR="sunxi-tools"
|
||||
MISC2=""
|
||||
MISC2_DIR=""
|
||||
MISC3=""
|
||||
MISC3_DIR=""
|
||||
MISC4="https://github.com/notro/fbtft"
|
||||
MISC4_DIR="$LINUXSOURCE/drivers/video/fbtft"
|
||||
;;
|
||||
|
||||
|
||||
lime-next)
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# Olimex Lime mainline kernel / experimental
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
BOOTLOADER="https://github.com/RobertCNelson/u-boot"
|
||||
BOOTSOURCE="u-boot"
|
||||
BOOTCONFIG="A20-OLinuXino-Lime_defconfig"
|
||||
CPUMIN="480000"
|
||||
CPUMAX="1010000"
|
||||
LINUXKERNEL="https://github.com/linux-sunxi/linux-sunxi -b sunxi-next"
|
||||
LINUXSOURCE="linux-sunxi-next"
|
||||
LOCALVERSION="-sunxi"
|
||||
DTBS="sun7i-a20-olinuxino-lime.dtb"
|
||||
DOCS="https://github.com/igorpecovnik/Cubietruck-Debian.wiki.git"
|
||||
DOCSDIR="docs-banana"
|
||||
MISC1="https://github.com/linux-sunxi/sunxi-tools.git"
|
||||
MISC1_DIR="sunxi-tools"
|
||||
MISC2=""
|
||||
MISC2_DIR=""
|
||||
MISC3=""
|
||||
MISC3_DIR=""
|
||||
MISC4="https://github.com/notro/fbtft"
|
||||
MISC4_DIR="$LINUXSOURCE/drivers/video/fbtft"
|
||||
;;
|
||||
@ -63,9 +167,9 @@ bananapi-next)
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# bananapi mainline kernel / experimental
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
BOOTLOADER="https://github.com/jwrdegoede/u-boot-sunxi"
|
||||
BOOTSOURCE="u-boot-sunxi-next"
|
||||
BOOTCONFIG="Bananapi_config"
|
||||
BOOTLOADER="https://github.com/RobertCNelson/u-boot"
|
||||
BOOTSOURCE="u-boot"
|
||||
BOOTCONFIG="Bananapi_defconfig"
|
||||
CPUMIN="480000"
|
||||
CPUMAX="1010000"
|
||||
LINUXKERNEL="https://github.com/linux-sunxi/linux-sunxi -b sunxi-next"
|
||||
@ -78,8 +182,8 @@ MISC1="https://github.com/linux-sunxi/sunxi-tools.git"
|
||||
MISC1_DIR="sunxi-tools"
|
||||
MISC2=""
|
||||
MISC2_DIR=""
|
||||
MISC3="https://github.com/dz0ny/rt8192cu"
|
||||
MISC3_DIR="rt8192cu"
|
||||
MISC3=""
|
||||
MISC3_DIR=""
|
||||
MISC4="https://github.com/notro/fbtft"
|
||||
MISC4_DIR="$LINUXSOURCE/drivers/video/fbtft"
|
||||
;;
|
||||
@ -94,7 +198,7 @@ BOOTSOURCE="u-boot-banana"
|
||||
BOOTCONFIG="BananaPi_config"
|
||||
CPUMIN="480000"
|
||||
CPUMAX="1010000"
|
||||
LINUXKERNEL="https://github.com/LeMaker/linux-bananapi"
|
||||
#LINUXKERNEL="https://github.com/LeMaker/linux-bananapi"
|
||||
LINUXKERNEL="https://github.com/dan-and/linux-sunxi"
|
||||
LINUXSOURCE="linux-sunxi"
|
||||
LOCALVERSION="-sunxi"
|
||||
|
||||
74
common.sh
74
common.sh
@ -16,8 +16,8 @@ debconf-apt-progress -- apt-get -y install pv bc lzop zip binfmt-support bison b
|
||||
debconf-apt-progress -- apt-get -y install gcc-arm-linux-gnueabihf lvm2 qemu-user-static u-boot-tools uuid-dev zlib1g-dev unzip libncurses5-dev
|
||||
debconf-apt-progress -- apt-get -y install libusb-1.0-0-dev parted pkg-config
|
||||
# for creating PDF documentation
|
||||
debconf-apt-progress -- apt-get -y install pandoc nbibtex texlive-latex-base texlive-latex-recommended texlive-latex-extra preview-latex-style
|
||||
debconf-apt-progress -- apt-get -y install dvipng texlive-fonts-recommended
|
||||
# debconf-apt-progress -- apt-get -y install pandoc nbibtex texlive-latex-base texlive-latex-recommended texlive-latex-extra preview-latex-style
|
||||
# debconf-apt-progress -- apt-get -y install dvipng texlive-fonts-recommended
|
||||
echo "Done.";
|
||||
}
|
||||
|
||||
@ -130,7 +130,7 @@ else
|
||||
git checkout master
|
||||
fi
|
||||
cd $DEST/$LINUXSOURCE
|
||||
if [[ $BOARD == "bananapi" ]]; then
|
||||
if [[ $BOARD == "bananapi" || $BOARD == "cubietruck" || $BOARD == "cubieboard2" || $BOARD == "lime" || $BOARD == "lime2" ]]; then
|
||||
if [ "$(patch --dry-run -t -p1 < $SRC/lib/patch/bananafbtft.patch | grep previ)" == "" ]; then
|
||||
patch --batch -N -p1 < $SRC/lib/patch/bananafbtft.patch
|
||||
fi
|
||||
@ -159,7 +159,7 @@ cd $DEST/$LINUXSOURCE
|
||||
make -s CROSS_COMPILE=arm-linux-gnueabihf- clean
|
||||
|
||||
rm -rf output
|
||||
mkdir -p output/boot
|
||||
mkdir -p output/boot output/boot/dtb
|
||||
|
||||
# Adding custom firmware to kernel source
|
||||
if [[ -n "$FIRMWARE" ]]; then unzip -o $SRC/lib/$FIRMWARE -d $DEST/$LINUXSOURCE/firmware; fi
|
||||
@ -177,15 +177,16 @@ then
|
||||
cp Module.symvers output/usr/include
|
||||
cp arch/arm/boot/zImage output/boot/
|
||||
cp arch/arm/boot/dts/*.dtb output/boot
|
||||
elif [[ $BOARD == "bananapi-next" || $BOARD == "cubietruck-next" ]]
|
||||
elif [[ $BOARD == *next* ]]
|
||||
then
|
||||
make $CTHREADS ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LOADADDR=0x40008000 uImage modules $DTBS LOCALVERSION="$LOCALVERSION"
|
||||
make $CTHREADS ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LOADADDR=0x40008000 uImage modules dtbs LOCALVERSION="$LOCALVERSION"
|
||||
make $CTHREADS ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_MOD_PATH=output modules_install
|
||||
make $CTHREADS ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_HDR_PATH=output/usr headers_install
|
||||
cp Module.symvers output/usr/include
|
||||
cp arch/arm/boot/uImage output/boot/
|
||||
cp arch/arm/boot/dts/*.dtb output/boot
|
||||
mkimage -C none -A arm -T script -d $SRC/lib/config/boot-$BOARD.cmd output/boot/boot.scr
|
||||
cp arch/arm/boot/dts/*.dtb output/boot/dtb
|
||||
sed -e "s/WHICH/$DTBS/g" $SRC/lib/config/boot.cmd > /tmp/boot.cmd
|
||||
mkimage -C none -A arm -T script -d /tmp/boot.cmd output/boot/boot.scr
|
||||
else
|
||||
make $CTHREADS ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage modules LOCALVERSION="$LOCALVERSION"
|
||||
make $CTHREADS ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_MOD_PATH=output modules_install
|
||||
@ -223,11 +224,12 @@ ln -s /usr/include/ source
|
||||
fi
|
||||
#
|
||||
cd $DEST/$LINUXSOURCE/output
|
||||
tar -cPf $DEST"/output/"$BOARD"_kernel_"$VER"_mod_head_fw.tar" *
|
||||
cd $DEST/output
|
||||
tar -cPf $DEST"/output/kernel/"$BOARD"_kernel_"$VER"_mod_head_fw.tar" *
|
||||
cd $DEST/output/kernel
|
||||
md5sum "$BOARD"_kernel_"$VER"_mod_head_fw.tar > "$BOARD"_kernel_"$VER"_mod_head_fw.md5
|
||||
zip "$BOARD"_kernel_"$VER"_mod_head_fw.zip "$BOARD"_kernel_"$VER"_mod_head_fw.*
|
||||
sync
|
||||
CHOOSEN_KERNEL="$BOARD"_kernel_"$VER"_mod_head_fw.tar
|
||||
}
|
||||
|
||||
|
||||
@ -236,7 +238,8 @@ creating_image (){
|
||||
# Create and mount SD image
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# check if previously build kernel file exits
|
||||
if [ ! -f "$DEST/output/"$BOARD"_kernel_"$VER"_mod_head_fw.tar" ]; then
|
||||
|
||||
if [ ! -f "$DEST/output/kernel/"$CHOOSEN_KERNEL ]; then
|
||||
echo "Previously compiled kernel does not exits. Please choose compile=yes in configuration and run again!"
|
||||
exit
|
||||
fi
|
||||
@ -271,7 +274,7 @@ tune2fs -o journal_data_writeback $LOOP
|
||||
# label it
|
||||
e2label $LOOP "$BOARD"
|
||||
# create mount point and mount image
|
||||
mkdir -p $DEST/output/sdcard/
|
||||
mkdir -p $DEST/output/sdcard/ $DEST/output/kernel
|
||||
mount -t ext4 $LOOP $DEST/output/sdcard/
|
||||
}
|
||||
|
||||
@ -346,13 +349,9 @@ install_board_specific (){
|
||||
# Install board specific applications
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
echo "------ Install board specific applications"
|
||||
if [[ $BOARD == "cubietruck" || $BOARD == "cubieboard" || $BOARD == "bananapi" || $BOARD == "lime" || $BOARD == "lime2" || $BOARD == "bananapi-next" || $BOARD == "cubietruck-next" ]] ; then
|
||||
if [[ $LOCALVERSION == *sunxi ]] ; then
|
||||
# enable serial console (Debian/sysvinit way)
|
||||
echo T0:2345:respawn:/sbin/getty -L ttyS0 115200 vt100 >> $DEST/output/sdcard/etc/inittab
|
||||
# sunxi tools
|
||||
cp $DEST/sunxi-tools/fex2bin $DEST/sunxi-tools/bin2fex $DEST/sunxi-tools/nand-part $DEST/output/sdcard/usr/bin/
|
||||
# script to install to SATA
|
||||
cp $SRC/lib/scripts/sata-install.sh $DEST/output/sdcard/root
|
||||
echo T0:2345:respawn:/sbin/getty -L ttyS0 115200 vt100 >> $DEST/output/sdcard/etc/inittab
|
||||
# alter rc.local
|
||||
head -n -1 $DEST/output/sdcard/etc/rc.local > /tmp/out
|
||||
echo 'echo 2 > /proc/irq/$(cat /proc/interrupts | grep eth0 | cut -f 1 -d ":" | tr -d " ")/smp_affinity' >> /tmp/out
|
||||
@ -360,12 +359,14 @@ if [[ $BOARD == "cubietruck" || $BOARD == "cubieboard" || $BOARD == "bananapi" |
|
||||
echo 'exit 0' >> /tmp/out
|
||||
mv /tmp/out $DEST/output/sdcard/etc/rc.local
|
||||
chroot $DEST/output/sdcard /bin/bash -c "chmod +x /etc/rc.local"
|
||||
if [[ $BOARD != *next* ]] ; then
|
||||
# sunxi tools
|
||||
cp $DEST/sunxi-tools/fex2bin $DEST/sunxi-tools/bin2fex $DEST/sunxi-tools/nand-part $DEST/output/sdcard/usr/bin/
|
||||
# script to install to SATA
|
||||
cp $SRC/lib/scripts/sata-install.sh $DEST/output/sdcard/root
|
||||
fi
|
||||
fi
|
||||
|
||||
if [[ $BOARD == "bananapi-next" ]] ; then
|
||||
cp $SRC/lib/config/uEnv.cubox-i $DEST/output/sdcard/boot/uEnv.txt
|
||||
fi
|
||||
|
||||
if [[ $BOARD == "bananapi" ]] ; then
|
||||
fex2bin $SRC/lib/config/bananapi.fex $DEST/output/sdcard/boot/bananapi.bin
|
||||
cp $SRC/lib/config/uEnv.bananapi $DEST/output/sdcard/boot/uEnv.txt
|
||||
@ -388,7 +389,7 @@ if [[ $BOARD == "lime" || $BOARD == "lime2" ]] ; then
|
||||
cp $SRC/lib/bin/nand1-allwinner.tgz $DEST/output/sdcard/root
|
||||
fi
|
||||
|
||||
if [[ $BOARD == "cubietruck" ]] ; then
|
||||
if [[ $BOARD == "cubietruck" || $BOARD == "cubieboard2" ]] ; then
|
||||
fex2bin $SRC/lib/config/cubietruck.fex $DEST/output/sdcard/boot/cubietruck.bin
|
||||
fex2bin $SRC/lib/config/cubieboard2.fex $DEST/output/sdcard/boot/cubieboard2.bin
|
||||
cp $SRC/lib/config/uEnv.cubietruck $DEST/output/sdcard/boot/uEnv.ct
|
||||
@ -470,7 +471,8 @@ fi
|
||||
# replace hostapd from testing binary.
|
||||
cd $DEST/output/sdcard/usr/sbin/
|
||||
tar xvfz $SRC/lib/bin/hostapd23.tgz
|
||||
cp $SRC/lib/config/hostapd.conf.$BOARD $DEST/output/sdcard/etc/hostapd.conf
|
||||
cp $SRC/lib/config/hostapd.conf $DEST/output/sdcard/etc/hostapd.conf
|
||||
sed -i "s/BOARD/$BOARD/" $DEST/output/sdcard/etc/hostapd.conf
|
||||
# don't clear screen
|
||||
sed -e 's/1:2345:respawn:\/sbin\/getty 38400 tty1/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/g' -i $DEST/output/sdcard/etc/inittab
|
||||
# console
|
||||
@ -523,12 +525,31 @@ sed -e 's/#SHM_SIZE=/SHM_SIZE=128M/g' -i $DEST/output/sdcard/etc/default/tmpfs
|
||||
sed -e 's/#TMP_SIZE=/TMP_SIZE=1G/g' -i $DEST/output/sdcard/etc/default/tmpfs
|
||||
# uncompress kernel
|
||||
cd $DEST/output/sdcard/
|
||||
tar -xPf $DEST"/output/"$BOARD"_kernel_"$VER"_mod_head_fw.tar"
|
||||
#ls ../*.tar | xargs -i tar xf {}
|
||||
tar -xPf $DEST"/output/kernel/"$CHOOSEN_KERNEL
|
||||
sync
|
||||
sleep 3
|
||||
# cleanup
|
||||
rm -f $DEST/output/*.md5 *.tar
|
||||
# recreate boot.scr if using kernel for different board. Mainline only
|
||||
if [[ $BOARD == *next* ]];then
|
||||
sed -e "s/WHICH/$DTBS/g" $SRC/lib/config/boot.cmd > /tmp/boot.cmd
|
||||
mkimage -C none -A arm -T script -d /tmp/boot.cmd $DEST/output/sdcard/boot/boot.scr
|
||||
fi
|
||||
}
|
||||
|
||||
|
||||
choosing_kernel (){
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
# Choose which kernel to use
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
cd $DEST"/output/kernel/"
|
||||
MYLIST=`for x in $(ls -1 *kernel*.tar); do echo $x " -"; done`
|
||||
WC=`echo $MYLIST | wc -l`
|
||||
if [[ $WC -ne 0 ]]; then
|
||||
whiptail --title "Choose kernel archive" --backtitle "Which kernel do you want to use?" --menu "" 12 60 4 $MYLIST 2>results
|
||||
fi
|
||||
CHOOSEN_KERNEL=$(<results)
|
||||
rm results
|
||||
}
|
||||
|
||||
|
||||
@ -626,6 +647,7 @@ rm $DEST/output/sdcard/usr/bin/qemu-arm-static
|
||||
umount -l $DEST/output/sdcard/
|
||||
sleep 2
|
||||
losetup -d $LOOP
|
||||
rm -rf $DEST/output/sdcard/
|
||||
|
||||
# create documentation
|
||||
#pandoc $SRC/lib/README.md $DEST/documentation/Home.md --standalone -o $DEST/output/$VERSION.pdf -V geometry:"top=2.54cm, bottom=2.54cm, left=3.17cm, right=3.17cm" -V geometry:paperwidth=21cm -V geometry:paperheight=29.7cm
|
||||
|
||||
@ -1,5 +0,0 @@
|
||||
setenv bootargs console=ttyS0,115200 sunxi_g2d_mem_reserve=0 sunxi_ve_mem_reserve=0 sunxi_no_mali_mem_reserve root=/dev/mmcblk0p1 rootwait panic=10 ${extra}
|
||||
ext4load mmc 0 0x46000000 /boot/uImage
|
||||
ext4load mmc 0 0x49000000 /boot/sun7i-a20-bananapi.dtb
|
||||
env set fdt_high ffffffff
|
||||
bootm 0x46000000 - 0x49000000
|
||||
@ -1,5 +0,0 @@
|
||||
setenv bootargs console=ttyS0,115200 sunxi_g2d_mem_reserve=0 sunxi_ve_mem_reserve=0 sunxi_no_mali_mem_reserve root=/dev/mmcblk0p1 rootwait panic=10 ${extra}
|
||||
ext4load mmc 0 0x46000000 /boot/uImage
|
||||
ext4load mmc 0 0x49000000 /boot/sun7i-a20-cubietruck.dtb
|
||||
env set fdt_high ffffffff
|
||||
bootm 0x46000000 - 0x49000000
|
||||
@ -1,5 +1,5 @@
|
||||
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10
|
||||
ext4load mmc 0 0x46000000 /boot/uImage
|
||||
ext4load mmc 0 0x49000000 /boot/dtbs/sun7i-a20-olinuxino-lime2.dtb
|
||||
ext4load mmc 0 0x49000000 /boot/dtb/WHICH
|
||||
env set fdt_high ffffffff
|
||||
bootm 0x46000000 - 0x49000000
|
||||
1829
config/cubieboard4.fex
Normal file
1829
config/cubieboard4.fex
Normal file
File diff suppressed because it is too large
Load Diff
@ -1,4 +1,4 @@
|
||||
ssid=LIME
|
||||
ssid=BOARD
|
||||
interface=wlan0
|
||||
hw_mode=g
|
||||
channel=1
|
||||
@ -16,4 +16,4 @@ wpa_key_mgmt=WPA-PSK
|
||||
wpa_pairwise=TKIP
|
||||
rsn_pairwise=CCMP
|
||||
auth_algs=1
|
||||
macaddr_acl=0
|
||||
macaddr_acl=0
|
||||
@ -1,19 +0,0 @@
|
||||
ssid=BANANA
|
||||
interface=wlan0
|
||||
hw_mode=g
|
||||
channel=1
|
||||
bridge=br0
|
||||
|
||||
logger_syslog=0
|
||||
logger_syslog_level=0
|
||||
|
||||
wmm_enabled=0
|
||||
wpa=2
|
||||
preamble=1
|
||||
wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27
|
||||
wpa_passphrase=12345678
|
||||
wpa_key_mgmt=WPA-PSK
|
||||
wpa_pairwise=TKIP
|
||||
rsn_pairwise=CCMP
|
||||
auth_algs=1
|
||||
macaddr_acl=0
|
||||
@ -1,19 +0,0 @@
|
||||
ssid=BANANA
|
||||
interface=wlan0
|
||||
hw_mode=g
|
||||
channel=1
|
||||
bridge=br0
|
||||
|
||||
logger_syslog=0
|
||||
logger_syslog_level=0
|
||||
|
||||
wmm_enabled=0
|
||||
wpa=2
|
||||
preamble=1
|
||||
wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27
|
||||
wpa_passphrase=12345678
|
||||
wpa_key_mgmt=WPA-PSK
|
||||
wpa_pairwise=TKIP
|
||||
rsn_pairwise=CCMP
|
||||
auth_algs=1
|
||||
macaddr_acl=0
|
||||
@ -1,19 +0,0 @@
|
||||
ssid=CUBIE
|
||||
interface=wlan0
|
||||
hw_mode=g
|
||||
channel=1
|
||||
bridge=br0
|
||||
|
||||
logger_syslog=0
|
||||
logger_syslog_level=0
|
||||
|
||||
wmm_enabled=0
|
||||
wpa=2
|
||||
preamble=1
|
||||
wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27
|
||||
wpa_passphrase=12345678
|
||||
wpa_key_mgmt=WPA-PSK
|
||||
wpa_pairwise=TKIP
|
||||
rsn_pairwise=CCMP
|
||||
auth_algs=1
|
||||
macaddr_acl=0
|
||||
@ -1,19 +0,0 @@
|
||||
ssid=BANANA
|
||||
interface=wlan0
|
||||
hw_mode=g
|
||||
channel=1
|
||||
bridge=br0
|
||||
|
||||
logger_syslog=0
|
||||
logger_syslog_level=0
|
||||
|
||||
wmm_enabled=0
|
||||
wpa=2
|
||||
preamble=1
|
||||
wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27
|
||||
wpa_passphrase=12345678
|
||||
wpa_key_mgmt=WPA-PSK
|
||||
wpa_pairwise=TKIP
|
||||
rsn_pairwise=CCMP
|
||||
auth_algs=1
|
||||
macaddr_acl=0
|
||||
@ -1,17 +0,0 @@
|
||||
ssid=CUBOX
|
||||
interface=wlan0
|
||||
hw_mode=g
|
||||
channel=1
|
||||
bridge=br0
|
||||
driver=nl80211
|
||||
logger_syslog=0
|
||||
logger_syslog_level=0
|
||||
wmm_enabled=0
|
||||
wpa=2
|
||||
preamble=1
|
||||
wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27
|
||||
wpa_passphrase=12345678
|
||||
wpa_key_mgmt=WPA-PSK
|
||||
rsn_pairwise=CCMP
|
||||
auth_algs=1
|
||||
macaddr_acl=0
|
||||
@ -1,19 +0,0 @@
|
||||
ssid=LIME
|
||||
interface=wlan0
|
||||
hw_mode=g
|
||||
channel=1
|
||||
bridge=br0
|
||||
|
||||
logger_syslog=0
|
||||
logger_syslog_level=0
|
||||
|
||||
wmm_enabled=0
|
||||
wpa=2
|
||||
preamble=1
|
||||
wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27
|
||||
wpa_passphrase=12345678
|
||||
wpa_key_mgmt=WPA-PSK
|
||||
wpa_pairwise=TKIP
|
||||
rsn_pairwise=CCMP
|
||||
auth_algs=1
|
||||
macaddr_acl=0
|
||||
6
main.sh
6
main.sh
@ -60,6 +60,12 @@ if [ "$SOURCE_COMPILE" = "yes" ]; then
|
||||
|
||||
# create tar file
|
||||
packing_kernel
|
||||
|
||||
else
|
||||
|
||||
# choose kernel from ready made
|
||||
choosing_kernel
|
||||
|
||||
#--------------------------------------------------------------------------------------------------------------------------------
|
||||
fi
|
||||
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
#! /bin/sh
|
||||
#! /bin/bash
|
||||
### BEGIN INIT INFO
|
||||
# Provides: armhwinfo
|
||||
# Required-Start:
|
||||
@ -21,7 +21,7 @@ case "$1" in
|
||||
start)
|
||||
# ARM
|
||||
if [ "$ARCH" = "armv7l" ]; then
|
||||
if [ "$HARDWARE" = "sun7i" ]; then
|
||||
if [ $HARDWARE = "sun7i" ] || [ $HARDWARE = "Allwinner" ]; then
|
||||
ID="Allwinner"
|
||||
if [ "$MEMTOTAL" = 2 ]; then
|
||||
ID="Cubietruck"
|
||||
@ -60,6 +60,14 @@ if [ "$ARCH" = "armv7l" ]; then
|
||||
fi
|
||||
fi
|
||||
|
||||
# mainline kernel - read from machine info
|
||||
|
||||
MACHINE=$(dmesg |grep "Machine model")
|
||||
|
||||
if [[ $MACHINE == *LIME2 ]]; then ID="Lime 2"; fi
|
||||
if [[ $MACHINE == *LIME ]]; then ID="Lime"; fi
|
||||
if [[ $MACHINE == *"Banana Pi" ]]; then ID="Banana PI"; fi
|
||||
|
||||
echo "" > /var/run/motd.dynamic
|
||||
toilet -f standard -F metal "$ID" >> /var/run/motd.dynamic
|
||||
echo "" >> /var/run/motd.dynamic
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
#!/bin/sh
|
||||
#!/bin/bash
|
||||
|
||||
### BEGIN INIT INFO
|
||||
# Provides: firstrun
|
||||
@ -30,7 +30,7 @@ case "$1" in
|
||||
echo ""
|
||||
toilet -f standard "first run"
|
||||
# if we have 1G ram reduce RAMLOG size
|
||||
if [ "$MEMTOTAL" = 1 ]; then
|
||||
if (($MEMTOTAL <= 1)); then
|
||||
sed -e 's/TMPFS_RAMFS_SIZE=512m/TMPFS_RAMFS_SIZE=256m/g' -i /etc/default/ramlog
|
||||
# for cubieboard disable some services
|
||||
if [ -f "/boot/cubieboard2.bin" ]; then
|
||||
|
||||
Loading…
Reference in New Issue
Block a user