* `orangepi5.wip`: initial OrangePi5 support
- OPi5's Xunlong vendor u-boot; override family in board hook
- using original config from vendor, needs `BOOT_SOC`
- OPi5's kernel patches, all extracted from Xunlong's tree
- Only enable the DT patch and the Motorcomm PHY patch
- Other stuff that looks might be useful is grouped in a few other disabled patches
- Most panel/overlays/etc from Xunlong tree not included
- everything is on top of existing `rockchip-rk3588` family,
- thus the same crazy half-android rk kernel tree and ancient rk u-boot
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* `linux-rockchip-rk3588-legacy`: `.config` updated to 5.10.110; no actual changes
- prepare for merging Xunlong config
* `linux-rockchip-rk3588-legacy`: `.config` Xunlong config, manually merged; preserved previous PR's
- preserved previous PR's changes:
- 1fdbab346a
- bf3b8a8fb7
- 7a3ad3afb2
- f1952f97f4
- ab70cb247f
- 62adba7825
- ba10622c32
- cd4da2a77b
- 7b3325c95e
- b4945d973c
- a8473e8143
* `linux-rockchip-rk3588-legacy`: `.config` re-updated to 5.10.110 after Xunlong changes
* OPi5: `rockchip-rk3588-legacy`: add patch to remove chosen > bootargs from `rk3588-linux.dtsi`
* Opi5: add build targets (by Igor)
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Igor <igor@armbian.com>
This fix impacts all boards that use extlinux.conf
I have tested the aml-s9xx-box build to ensure that this works as expected.
I think the only other boards that use extlinux.conf are those under
the media kernel
In testing I realized that I needed to add SRC_CMDLINE to the aml-s9xx-box
config file to get the correct append line added to the extlinux.conf file
Changes to be committed:
modified: config/boards/aml-s9xx-box.tvb
modified: config/sources/common.conf
config doesn't include rtl8822cs (which apparently some TV boxes use).
This is enabled in most kernel configs:
linux-bcm2711-current.config:CONFIG_RTL8822CS=m
linux-bcm2711-edge.config:CONFIG_RTL8822CS=m
linux-imx6-current.config:CONFIG_RTL8822CS=m
linux-imx6-edge.config:CONFIG_RTL8822CS=m
linux-media-current.config:CONFIG_RTL8822CS=m
linux-media-edge.config:CONFIG_RTL8822CS=m
linux-media-legacy.config:# CONFIG_RTL8822CS is not set
linux-meson64-current.config:CONFIG_RTL8822CS=m
linux-meson64-edge.config:# CONFIG_RTL8822CS is not set
linux-mvebu64-current.config:CONFIG_RTL8822CS=m
linux-mvebu64-edge.config:CONFIG_RTL8822CS=m
linux-mvebu-current.config:CONFIG_RTL8822CS=m
linux-mvebu-edge.config:CONFIG_RTL8822CS=m
linux-odroidxu4-edge.config:CONFIG_RTL8822CS=m
linux-rk322x-current.config:CONFIG_RTL8822CS=m
linux-rk322x-edge.config:CONFIG_RTL8822CS=m
linux-rockchip64-current.config:CONFIG_RTL8822CS=m
linux-rockchip64-edge.config:CONFIG_RTL8822CS=m
linux-rockchip-current.config:CONFIG_RTL8822CS=m
linux-rockchip-edge.config:# CONFIG_RTL8822CS is not set
linux-rockchip-rk3588-legacy.config:# CONFIG_RTL8822CS is not set
linux-sunxi64-current.config:CONFIG_RTL8822CS=m
linux-sunxi64-edge.config:CONFIG_RTL8822CS=m
linux-sunxi64-legacy.config:CONFIG_RTL8822CS=m
linux-sunxi-current.config:CONFIG_RTL8822CS=m
linux-sunxi-edge.config:CONFIG_RTL8822CS=m
linux-sunxi-legacy.config:CONFIG_RTL8822CS=m
linux-uefi-arm64-current.config:CONFIG_RTL8822CS=m
linux-uefi-arm64-edge.config:# CONFIG_RTL8822CS is not set
linux-uefi-riscv64-current.config:# CONFIG_RTL8822CS is not set
linux-uefi-riscv64-edge.config:# CONFIG_RTL8822CS is not set
linux-uefi-x86-current.config:CONFIG_RTL8822CS=m
linux-uefi-x86-edge.config:CONFIG_RTL8822CS=m
This commit enables this for just the meson64-edge kernel as that resolves the
issue I was researching, but I suspect it probably should also be enabled for
rockchip-edge as well, but I don't have any such devices.
On branch rtl8822cs_meson64_edge
Changes to be committed:
modified: ../kernel/linux-meson64-edge.config
* Don't display RX today: Error: No interface matching when wrong NIC is detected
* Improve checking
* Address shellcheck problem
* Switch conditions order
* Fix variable $root_partition_device to be a device path
- variable $root_partition_device is intended to be a
device path as /dev/$root_partition_device_name
* Fix determination and usage of variable $sduuid
- a) lookup mmc devices excluding the mmc device probably providing
the current root partition
- b) if there is no sduuid determined by this lookup,
then lookup any mmc partition matching /dev/mmcblk*p1
- c) move the sduuid calculation to the script header
to enable usage for scenario selection filtering
- d) hide installation scenario #1 selection,
if $sduuid is empty, since $sduuid is essential for that scenario
* Hide current root partition device from destination selection
- add new variable $root_partition_name
- use this variable to filter current root partition
from destination selection in check_partitions()
* Fix behavior in case of no available partition
- The logic in check_partitions() in case of no available
partition is improved not to fail for a hidden reason
and UX for fresh disk devices is improved
- Fix the calculation of $FREE_SPACE for devices without or
with an empty partition table
- Ask the user to proceed AFTER the minimum free capacity
required is verified
- Improve the logic for auto-creating initial partitions
as follows:
1. Check for a minimum free space of 4GB for a partition
2. Ask user to proceed with auto-created partition(s) or not
3. Distinguish between UEFI and non UEFI device
4. Create a partition of full free size for non UEFI devices also
* Add support for MTD char driven flash
- replace $spicheck by $mtdcheck
- add probable MTD char device partitions to $mtdcheck
- update comments and dialog content:
- replace "SPI Flash" by "MTD Flash"
- replace call of "create_armbian 'spi' ..." by "create_armbian 'mtd' ..."
- update description for /dev/nand1 /dev/nand2 as "legacy SUNXI NAND"
- additional parameters passed to import function "write_uboot_platform_mtd":
$3 - Log file name
$4 - SPACE separated list of all MTD device partition(s)
* Moving repository handling from main script
- cleaning
- working
TBD: handling of parameters
* Not needed anymore
* Paramter handling, edit config in mktemp
* Typo
* Improve string handling
* Cleanining
* Compacting
* Change to backslash compatible sed replacement
* Publish all, update selected to avoid having erros at update
* Add support for html index generation
* Bugfix
* More arch
* Don't run publish if there is nothing in the incoming
* Add repo sync control file creation
* Fix hardcoded value
* moved rockpro64 patch out of rockpis patch sequence
It had been misnamed
* patch new mainline devtree for Rock Pi-S instead of overwritting it.
Also restores lost bluetooth compatibility items on UART4
- function check_partitions():
- remove file system filter on lsblk commands
for listing probable target partitions
- fix typo "Destnation" -> "Destination"
- fix indentation on if scopes
fixes#4576
There is no way to support this on s905 TV Boxes while reusing the
android u-boot as the android uboot on s905 conflicts with the partition
table location of standard mainline linux.
Changes to be committed:
modified: config/sources/families/meson-gxl.conf
deleted: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh
