* update libreelec patches to latest bits
* rework some patches
* rework dtb patches due to new arch/arm/boot/dts layout
* fix led overlays due to idiot u-boot dtbo bug
- restore the victims as well
```
CONFIG_INPUT_RK805_PWRKEY=y
CONFIG_PINCTRL_RK805=y
CONFIG_CHARGER_RK817=m
CONFIG_REGULATOR_RK808=y
CONFIG_SND_SOC_RK817=m
CONFIG_RTC_DRV_RK808=y
CONFIG_COMMON_CLK_RK808=y
```
- only "boot from SD" supported right now
- building uboot with xPack riscv-none-embed-gcc **external** toolchain setup in hooks
- kvim4: very high kernel logging + systemd debug logging to console
- kvim4/kvim1s: add uEnv.txt and ROOT_FS_LABEL="ROOTFS" and Khadas-esque extlinux
- meson-s4t7: unify khadas-vim1s and khadas-vim4 u-boot building
- kernel .config:
- s4t7: original Khadas vendor config
- s4t7: CONFIG_BINFMT_MISC=y
- s4t7: make NFS/sunrpc stuff =y
- s4t7: enable USB wifi drivers from Armbian network_drivers
- firmware: at https://github.com/armbian/firmware/pull/56
- extlinux tricks require https://github.com/armbian/build/pull/5462
- status:
- kvim1s: boots from SD and works as server/CLI
- kvim4: kernel panic during systemd-udevd
- x13s: initialize bluetooth's public-addr, thus allowing BT to work
- linux-arm64-sc8280xp.config: enable per-core temperature sensors
- x13s: disable snapd.seeded service so boot won't hang if clock's < 2017
- x13s: back to steev's 6.3.y, since 6.4.y's audio drivers don't match alsa-ucm-conf
Removed WIP status
Added CONFIG_R8169=m to defconfig(s) (eth support)
Modified and added additional patches (linux 6.1 / 6.4)
U-Boot v2023.07.2 (dropped v2022.10)
Upstream BT FW (rtl8822cs) is now shared between CM4IO and M2s
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Disabled ws2812 driver for all sunxi64 boards in edge kernel. As this
driver is used by Bigtreetech CB1 board, the driver is enabled for the
same but edge kernel is kept back at 6.2.16. Once the driver has been
updated, we can revert this commit.
- add `GRUB_CMDLINE_LINUX_DEFAULT` with `efi=noruntime clk_ignore_unused pd_ignore_unused` so it actually boots
- use `grub-with-dtb` for the (required) DTB usage in grub
- use a customize hook to add a lot of modules & fw into initrd, required for booting
- if on RELEASE=lunar, add Ubuntu's "x13s Concept" PPA and a few packages for battery control/audio
BPI-CM4:
In accordance with the BSP DTS, set LED gpio to GPIO_ACTIVE_LOW.
Added default-on trigger to led-green
Board now powers off, added reboot node 'meson64-reboot'.
CONFIG_POWER_RESET_MESON64
Isolated RESET ODROID driver and renamed to MESON64 as it can be used in more than ODROIDS.
MESON UART
Series improves support for UART attached Bluetooth modules on Amlogic Meson G12A and newer SoCs. These SoCs also support the "divide XTAL by 2" bit which (greatly) reduces jitter when generating baud rates such as 1500000 (which is used by the Bluetooth part of the RTL8822CS SDIO WiFi and UART Bluetooth combo chip).
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
- `meson64`-`edge` (6.2.y): drop old/unused/pre-armbian-next builddeb patch that was leftover
- `meson64`-`edge` (6.2.y): pick & squash from chewitt's tree; new t95z board and its tm1628 driver, fixes for odroidc2, vim3, gxl/gxm SDIO
- `meson64`-`edge` (6.2.y): reword the `-spi` extra DTBs for the N2(+) into more generic for g12; add VIM3/VIM3L which also have same SPI NOR scheme
- `meson64`-`edge` (6.2.y): update .config to 6.2.16; enable `CONFIG_TM1628`
- `meson64`-`edge` (6.2.y): rebase to 6.2.16 after picking chewitt
* sunxi-6.1: rebase to v6.1.14, reexport patches megous
* sunxi-6.1: rename fixes patches
* sunxi-6.1: reexport armbian patches
* sunxi-6.1: fix the series.conf file to the current state
* sunxi-6.1: switch edge to v6.1.14
* Adjust sunxi to 5.15 / 6.1 / 6.2
- change configs
- adjust broken patches
- disable patch that only changes /readme.md and it has issues
---------
Co-authored-by: Igor Pečovnik <igor@armbian.com>
- `risc-v`: rework RichNeese's boards, reduce families, move tweaks to boards
- `risc-v`/`starfive`: `CONFIG_MOTORCOMM_PHY=m` for the onboard Ethernet
- `risc-v`/`starfive`: use mainline kernel 6.1.y, with StarFive's rebased patches against `v6.1.5`
- from https://github.com/starfive-tech/linux/commits/visionfive
- contention point: `1022-soc-sifive-ccache-Add-StarFive-JH71x0-support.patch` which I merged half-assed, need review/fixes?
- `risc-v`/`starfive`: update kernel config, sans changes
- `risc-v`/`starfive`: switch from `grub` to `extlinux`
- `risc-v`/`starfive`: new `starfive` family with their (vendor) kernel
Co-authored-by: Richard Neese <r.neese@gmail.com>
add support for various HID game controllers and waydroid on rk3588 legacy kernel
Co-authored-by: monkaBlyat <54044929+monkaBlyat@users.noreply.github.com>
* Add some Wireless modules to RK3588 legacy kernel
* Add some Wireless modules to RK3588 legacy kernel
* Add some Wireless modules to RK3588 legacy kernel
This is already enabled in the rockchip family on edge and per the discussion
here: https://forum.armbian.com/topic/20018-mglru-patches-to-bring-down-kswapd-cpu-usage
I would like to enable it on meson64-edge. And if that goes smoothly,
I will followup with a PR to enable it on meson64-current also since that is
now on 6.1.
Changes to be committed:
modified: config/kernel/linux-meson64-edge.config
* Initial work on bringing mvebu to 6.0
* Switch mvebu edge to 6.1
* Remove link leftover
* Update kernel config
Co-authored-by: Igor <igor@armbian.com>
* `orangepi5.wip`: initial OrangePi5 support
- OPi5's Xunlong vendor u-boot; override family in board hook
- using original config from vendor, needs `BOOT_SOC`
- OPi5's kernel patches, all extracted from Xunlong's tree
- Only enable the DT patch and the Motorcomm PHY patch
- Other stuff that looks might be useful is grouped in a few other disabled patches
- Most panel/overlays/etc from Xunlong tree not included
- everything is on top of existing `rockchip-rk3588` family,
- thus the same crazy half-android rk kernel tree and ancient rk u-boot
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* `linux-rockchip-rk3588-legacy`: `.config` updated to 5.10.110; no actual changes
- prepare for merging Xunlong config
* `linux-rockchip-rk3588-legacy`: `.config` Xunlong config, manually merged; preserved previous PR's
- preserved previous PR's changes:
- 1fdbab346a
- bf3b8a8fb7
- 7a3ad3afb2
- f1952f97f4
- ab70cb247f
- 62adba7825
- ba10622c32
- cd4da2a77b
- 7b3325c95e
- b4945d973c
- a8473e8143
* `linux-rockchip-rk3588-legacy`: `.config` re-updated to 5.10.110 after Xunlong changes
* OPi5: `rockchip-rk3588-legacy`: add patch to remove chosen > bootargs from `rk3588-linux.dtsi`
* Opi5: add build targets (by Igor)
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Igor <igor@armbian.com>
config doesn't include rtl8822cs (which apparently some TV boxes use).
This is enabled in most kernel configs:
linux-bcm2711-current.config:CONFIG_RTL8822CS=m
linux-bcm2711-edge.config:CONFIG_RTL8822CS=m
linux-imx6-current.config:CONFIG_RTL8822CS=m
linux-imx6-edge.config:CONFIG_RTL8822CS=m
linux-media-current.config:CONFIG_RTL8822CS=m
linux-media-edge.config:CONFIG_RTL8822CS=m
linux-media-legacy.config:# CONFIG_RTL8822CS is not set
linux-meson64-current.config:CONFIG_RTL8822CS=m
linux-meson64-edge.config:# CONFIG_RTL8822CS is not set
linux-mvebu64-current.config:CONFIG_RTL8822CS=m
linux-mvebu64-edge.config:CONFIG_RTL8822CS=m
linux-mvebu-current.config:CONFIG_RTL8822CS=m
linux-mvebu-edge.config:CONFIG_RTL8822CS=m
linux-odroidxu4-edge.config:CONFIG_RTL8822CS=m
linux-rk322x-current.config:CONFIG_RTL8822CS=m
linux-rk322x-edge.config:CONFIG_RTL8822CS=m
linux-rockchip64-current.config:CONFIG_RTL8822CS=m
linux-rockchip64-edge.config:CONFIG_RTL8822CS=m
linux-rockchip-current.config:CONFIG_RTL8822CS=m
linux-rockchip-edge.config:# CONFIG_RTL8822CS is not set
linux-rockchip-rk3588-legacy.config:# CONFIG_RTL8822CS is not set
linux-sunxi64-current.config:CONFIG_RTL8822CS=m
linux-sunxi64-edge.config:CONFIG_RTL8822CS=m
linux-sunxi64-legacy.config:CONFIG_RTL8822CS=m
linux-sunxi-current.config:CONFIG_RTL8822CS=m
linux-sunxi-edge.config:CONFIG_RTL8822CS=m
linux-sunxi-legacy.config:CONFIG_RTL8822CS=m
linux-uefi-arm64-current.config:CONFIG_RTL8822CS=m
linux-uefi-arm64-edge.config:# CONFIG_RTL8822CS is not set
linux-uefi-riscv64-current.config:# CONFIG_RTL8822CS is not set
linux-uefi-riscv64-edge.config:# CONFIG_RTL8822CS is not set
linux-uefi-x86-current.config:CONFIG_RTL8822CS=m
linux-uefi-x86-edge.config:CONFIG_RTL8822CS=m
This commit enables this for just the meson64-edge kernel as that resolves the
issue I was researching, but I suspect it probably should also be enabled for
rockchip-edge as well, but I don't have any such devices.
On branch rtl8822cs_meson64_edge
Changes to be committed:
modified: ../kernel/linux-meson64-edge.config
* Enable CONFIG_BPF_SYSCALL which might improve Docker support
* Adjust board names
* Move neo3 to previous bootloader too
* Disable 3d support on rock64
* Add initial RISCV support
* Add UEFI edge and current kernel configs
* Cleanup and adjust packages
* Those files were in wrong path
* Fix locations
* Ubuntu images built
* Remove Debian support as its too fragile
* Remove Pinta as it doesn't work under riscv
* Limitation is only for building images
* Remove obsolete switch
* Cleanup major arch config files
* Support for Docker building
