* Improve all kernel building
Store hashes and rebuild only changed kernels. TBD: support for patch directory not fully implemented yet
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add support for patch directory checking
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Update lib/build-all-ng.sh
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
* Update lib/build-all-ng.sh
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
* Update lib/compilation.sh
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
* Update lib/compilation.sh
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
* Update build-all-ng.sh
* Disable u-boot hashing for now
* remove banana r2
breaks compilation ... no time for inspection ATM
* typo
* Change s5p6818 to COMMIT instead of TAG
TAG points to a different HASH and its not posible to resolve hash without cloning. This can be addressed later, but now commit HASH will do.
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bumping to new version
* Bumping to new version
* Bump
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* few changes
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Test
* Bumping to new version
* Bumping to new version
BOARD
Cubox i2eX/i4
* Bumping to new version
imx6 current
meson-gxl current
* Bumping to new version
linux-image-current-imx6_20.08.4-trunk_armhf.deb
linux-image-current-meson64_20.08.4-trunk_arm64.deb
* Bumping to new version
Adding following kernels:\n
* Bumping to new version
Adding following kernels:
linux-image-current-imx6_20.08.4-trunk_armhf.deb
linux-image-current-meson64_20.08.4-trunk_arm64.deb
* Bumping to new version
Adding following kernels:
linux-image-current-meson64_20.08.5-trunk_arm64.deb
linux-image-current-sunxi_20.08.5-trunk_armhf.deb
linux-image-legacy-meson_20.08.5-trunk_armhf.deb
linux-image-legacy-s5p6818_20.08.5-trunk_arm64.deb
* fix versioning
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bumping to new version
Adding following kernels:
linux-image-current-meson64_20.08.1_arm64.deb
* Put version back
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bumping to new version
Adding following kernels:
linux-image-current-imx6_20.08.0-trunk_armhf.deb
linux-image-current-meson64_20.08.0-trunk_arm64.deb
linux-image-current-mvebu_20.08.0-trunk_armhf.deb
linux-image-current-mvebu64_20.08.0-trunk_arm64.deb
linux-image-current-odroidxu4_20.08.0-trunk_armhf.deb
linux-image-current-rockchip_20.08.0-trunk_armhf.deb
linux-image-current-rockchip64_20.08.0-trunk_arm64.deb
linux-image-current-sunxi_20.08.0-trunk_armhf.deb
linux-image-dev-mvebu_20.08.0-trunk_armhf.deb
linux-image-dev-rockchip64_20.08.0-trunk_arm64.deb
linux-image-legacy-meson_20.08.0-trunk_armhf.deb
linux-image-legacy-meson64_20.08.0-trunk_arm64.deb
linux-image-legacy-mvebu_20.08.0-trunk_armhf.deb
linux-image-legacy-mvebu64_20.08.0-trunk_arm64.deb
linux-image-legacy-odroidxu4_20.08.0-trunk_armhf.deb
linux-image-legacy-rk3399_20.08.0-trunk_arm64.deb
linux-image-legacy-rockchip_20.08.0-trunk_armhf.deb
linux-image-legacy-rockchip64_20.08.0-trunk_arm64.deb
linux-image-legacy-rockpis_20.08.0-trunk_arm64.deb
linux-image-legacy-s5p6818_20.08.0-trunk_arm64.deb
* Bumping to new version
Adding following kernels:
* Bumping to new version
Adding following kernels:
linux-image-dev-rockchip_20.08.0-trunk.2_armhf.deb
* Bumping to new version
Adding following kernels:
* Bumping to new version
Adding following kernels:
* Bumping to new version
Adding following kernels:
* Bumping to new version
Adding following kernels:
* Report error code, adjust version
* Adjust ver
* Add another switch
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
Co-authored-by: root <root@workstation>
* Add GPT parition table support Leave unchanged / mbr by default since GPT doesn't works everywhere.
* Accept ROOTFS_PARTITION_TABLE as a parameter
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Change variable name
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Update README.md
* Delete FORCE_CHECKOUT, IGNORE_UPDATES variables
There are currently two questionable variables.
They are the keys in the structures:
'if [[ $FORCE_CHECKOUT == yes ]]; then' in the function 'fetch_from_repo()'
which is set by default by the script 'main.sh'
'[[ -z $FORCE_CHECKOUT ]] && FORCE_CHECKOUT=yes'
Next in the script 'main.sh'
if [[ $IGNORE_UPDATES != yes ]]; then
display_alert "Downloading sources" "" "info"
fetch_from_repo "$BOOTSOURCE" "$BOOTDIR" "$BOOTBRANCH" "yes"
This key has aged. It can't work properly today.
We should always clear the sources before starting the build.
For this reason, these two keys in these places do not make any sense.
You can just delete them.
* Working offline for sources
This is useful when building recursively for multiple platforms,
when some resource on the Internet is frozen.
To do this, I entered a new variable 'OFFLINE_WORK'
* New ability to work in offline mode
* Skip check prepare host
* Add unset OFFLINE_WORK in lib/build-all-ng.sh
Sources, time and host will not be checked
Now you can collect packages without accessing the Internet
This is a minimal fix for the correct display
of characters in the applications, especially the console.
For example, if the locale-gen command is only for one locale
locale-gen ru_RU.UTF-8
Then the console application MC instead of a line in the frame outputs:
@
@@@@@@@@@@@@@@@@@@
@ README.md
@@@@@@@@@@@@@@@@@@
@
@
Setting variables to LC_ALL=C LANG=C is not necessary in this construction.
The line with the editor is not needed.
The 'locale-gen en_US.UTF-8 xx_XX.UTF-8' command
will fix this file itself.
* Exit if you can't create a directory
Otherwise the entire folder structure will crash
* git rev-parse --git-dir will always return ".git" line
if we are in the git repository folder.
When there is a symbolic link in the path, some functions
will not return what is expected. This condition is always true.
$(git rev-parse --show-toplevel) != $(pwd)
This commit fixes this threat
* fix permisson denied error happening in line 79
`mktemp` creates files with `-rw-------` (on Ubuntu bionic at least), which causes `line 79` to throw a permission denied error if the file isn't world readable.
* fixes umount error caused by single quotes
* force metadata duplication for btrfs root
Without this change metadata duplication is automatically turned off for `mkfs.btrfs` when the **build system** has a SSD drive.
However, since Armbian image is most likely flashed to a SD card afterwards, the drive type of the build host system should not be the deciding factor.
Metadata duplication is a good idea (better reliability) to have on a SD card.
From `man mkfs.btrfs`:
```
-m|--metadata <profile>
Specify the profile for the metadata block groups. Valid values are raid0, raid1, raid5, raid6, raid10, single or dup, (case does not matter).
A single device filesystem will default to DUP, unless a SSD is detected. Then it will default to single.
```
* armbian-resize-filesystem fails on first run due to missing fdisk
The `fdisk` package is missing in the `minimal` image, in bullseye at leat. Maybe other, future minimal images as well.
This will cause the `armbian-resize-filesystem` script to fail on first boot, which contains several
`fdisk` references. This could be fixed in the `bullseye` specific section, but since fdisk is so
essential for Armbian, it's probably best to list it in the general, mandatory packages to make sure it's available in every image in any case.
* fix for https://github.com/armbian/build/issues/1584
Since Debian buster the final `update-initramfs` call must be made
on the finished image where the final root device is mounted, else
`cryptsetup-initramfs` hooks fail to detect the root device.
* Merge remote-tracking branch 'upstream/master'
* make sure cryptsetup-initramfs is installed in any case if CRYPTROOT_SSH_UNLOCK is configured
Before Debian **bullseye**, `cryptsetup-initramfs` was a hard dependency of the `cryptsetup` package. Not anymore.
Therefore we need to install `cryptsetup-initramfs` explicitly, else CRYPTROOT_SSH_UNLOCK won't work.
* Switching Odroid C1 boot partition to FAT
U-boot FAT driver is very unstable and there is no wish to dig into u-boot. Seems like a sane workaround @plntyk
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add notes for separate boot partitions
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Typo
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bugfix: use zImage for converting to uImage since on FAT partitions we use move
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Cleanup C1 boot scripts
We have no plans to ever support legacy kernel again. Removing related things
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* A bit more radical change. Moving meson current to (new) legacy, current to 5.6.y and dev to some development branch / commit.
* Remove unneded patch
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Fixing desktop install on Ubuntu Focal / Eean
Changed dependencies for Network manager automatically install Gnome3 desktop unless certain packages are installed first. Fixing with pre-depends package feature. Tested on arm64, desktop install on top of CLI image
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Rework packages install that they can be installed from repository instead of local compile. Handy for making releases.
* Don't build ATF if you don't build u-boot
* meson-sm1: use amlogic-boot-fip to generate boot binary for SM1
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* patch: add Linux and U-Boot patches
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* configs: enable Odroid-C4
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* Remove Xenial from supported host OS
... and adjust comments.
I'd suggest add `tricia` as codename for Linux Mint based on Bionic somewhere but not sure where to put it.
* Add Debian Buster and Linux Mint
compatible build hosts
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* Replace apt with apt-get unless in chroot
* Improve support for Buster and Mint Debbie
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* Add 8189es out of the tree patch from repository.
* Added 8189FS version
* Support building on kernel 5.6. for 88x2bu
Tested for building on legacy, current and dev, removed old patches
Enable Realtek 8723DS only for kernel 5.5 and above. We only need it for Rockpi S DEV kernel, while it causes troubles on at least on 5.4.y
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* [ROCK Pi S] WIP mainline (dev) target
* [ROCK Pi S] Disable `rockchip64-dev` patches for now
* [ROCK Pi S] Add rtl8723ds wifi drivers
* [ROCK Pi S] Enable onboard audio (`rk3308-acodec`,`rk3308-i2s-tdm`)
Switch kernelsource to 5.5.y
* [ROCK Pi S] WIP: Use mainline 5.5.y kernel
Add a new `current` branch that tracks mainline
* [ROCK Pi S] Use updated u-boot board dt name `rk3308-rock-pi-s`
Removing the need for a special bootenv for n
* Temporally disable current
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* Move to new version of wireless driver for 8188EU, disable staging driver from kernel which is worse quality
* Update driver for RTL8812AU/21AU and RTL8814AU
* Port ANX78xx Pinebook / Teres LCD panel driver from 5.6-rc1
* Move Teres U-boot to 2020.01 ... it boots with enabled screen now.
* U-boot 2020 needs some extra Pyton utils when packing sunxi bootloader. Adding to native and Docker build dependencies.
* Add Pinebook lid wakeup
* python3-dev is also needed dependency
* Add exceptions to support native Ubuntu 20.04 building, fix small bug related to SD card write verification.
* Improve first install steps by installing Dialog and lsb_release first. This left out since we moved host install after we choose what we will do ... dialog is essential for this. Second we don't wait properly for APT manager to finish the process. Fixed with this commit
* Suppress output
* Update OdroidXU4 dev config & patches
Since Debian buster the final `update-initramfs` call must be made
on the finished image where the final root device is mounted, else
`cryptsetup-initramfs` hooks fail to detect the root device.
Currently, invoking compile.sh will run its mono task of building all the
components into a final image.
In some situation, especially when developing with Kernel or U-Boot, it is
handy to run a portion of that great task like:
export BOARD=firefly-rk3399
export BRANCH=dev
# more to avoid the popup of dialog
./compile.sh 'fetch_from_repo "$BOOTSOURCE" "$BOOTDIR" "$BOOTBRANCH" "yes"'
./compile.sh 'compile_uboot'
or use a profile to keep things simple:
./compile.sh default BRANCH=dev 'compile_uboot'
AR-1 - Adding support category for distributions
AR-4 - Remove Allwinner legacy
AR-5 - Drop Udoo family and move Udoo board into newly created imx6 family
AR-9 - Rename sunxi-next to sunxi-legacy
AR-10 - Rename sunxi-dev to sunxi-current
AR-11 - Adding Radxa Rockpi S support
AR-13 - Rename rockchip64-default to rockchip64-legacy
AR-14 - Add rockchip64-current as mainline source
AR-15 - Drop Rockchip 4.19.y NEXT, current become 5.3.y
AR-16 - Rename RK3399 default to legacy
AR-17 - Rename Odroid XU4 next and default to legacy 4.14.y, add DEV 5.4.y
AR-18 - Add Odroid N2 current mainline
AR-19 - Move Odroid C1 to meson family
AR-20 - Rename mvebu64-default to mvebu64-legacy
AR-21 - Rename mvebu-default to mvebu-legacy
AR-22 - Rename mvebu-next to mvebu-current
AR-23 - Drop meson64 default and next, current becomes former DEV 5.3.y
AR-24 - Drop cubox family and move Cubox/Hummingboard boards under imx6
AR-26 - Adjust motd
AR-27 - Enabling distribution release status
AR-28 - Added new GCC compilers
AR-29 - Implementing Ubuntu Eoan
AR-30 - Add desktop packages per board or family
AR-31 - Remove (Ubuntu/Debian) distribution name from image filename
AR-32 - Move arch configs from configuration.sh to separate arm64 and armhf config files
AR-33 - Revision numbers for beta builds changed to day_in_the_year
AR-34 - Patches support linked patches
AR-35 - Break meson64 family into gxbb and gxl
AR-36 - Add Nanopineo2 Black
AR-38 - Upgrade option from old branches to new one via armbian-config
AR-41 - Show full timezone info
AR-43 - Merge Odroid N2 to meson64
AR-44 - Enable FORCE_BOOTSCRIPT_UPDATE for all builds
In fetch_from_repo() from general.sh, when ref uses `head` as value, the ref_name
will be set to `HEAD`, which is later used as a subdir:
local workdir=$dir/$ref_name
This commit makes the directories consistent with the workdir above.
* btrfs-tools to btfs-progs
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Force rootfs cache recompilation
"Just in case" measure
* Change btrfs-progs in the package base too
* We will build Ubuntu 19.10 rootfs cache as well
U-boot runs several targets. Cubox, Helios4, ... and they are not cleaned at checkout. @zhangn1985
This reverts commit 357926add6
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
source code cleanup should be done in source update/checkout step.
thus no need redundant cleanup in apply patch step.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Initial commit for serial consoles rfc
* Board configuration cleanup + small tweaks
* Add serial gadget rename to dev kernel as well
* Cleanup, fixing permissions
* Cleanup board configs
* Introducing build-all-ng
* Implementing REBUILD_IMAGES='board1,board2,...' for rebuilding certain images only
* Add optimisations when building kernels - only cycle trough needed targets. Adding variable for defining whether an image is build, otherwise only BSP is made.
* repository manipulating RFC
* Add bianco deb file that is added by default if repository is clean
* Switch to gpg2 signing method, small bugfix
* Create subdir for debs and debs-beta
* Synaptic bugfix: installing indexing tools https://forum.armbian.com/topic/8021-orange-pi-one-synaptic-package-manager-search-very-slow/?do=findComment&comment=74918
* add all modules by default to Odroid N2, but leave them commented
* Bugfix: not making any builds when selecting kernel_only
* Remove EXTERNAL=yes ... move armbian-config and armbian-firmware into main compilation area, drop others since they are deprecated anyway. This will also enable multi threaded images making
* Move armbian.list to create_sources_list function. Replace NTP by Chrony. Remove armbian-firmware from PACKAGE_LIST and RockPi 4A (#1528)
* Replace NTP by chrony. Remove installion of outdated armbian-firmware from reposity.
* added RockPi 4A
* New format for board config
* Fix Bluetooth dependencies for minimal package - add rfkill to family related installs
* Moving networkd-dispatcher from minimal image
* Cubox-i: update default config
* Improving umount process
* Add purgesource feature
* Add FULL_DESKTOP to install few more applications on top of our desktop - notebooks should * rk3399 default: adjust patches and configuration
* Enable full desktop on most powerfull boards and notebooks
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Minimal build setup (#1463)
* Netplan folder check & armbian-tools dependency on expect (and tcl) solved (#1464)
* Prevent netplan configration if it is not installed
* Resolved expect dependecy of armbian-tools
* More packages added for armbian-tools
* Added python3-apt and rsyslog to minimal installation
* Debootstrap variant doesn't play nice. We loose networking and it affects standard builds as well. Removing.
* Python-to-Bash conversion (#1470)
* Remove python3-apt dependency from BSP package, fix netplan error also on Disco and putting back varint=minbase ... tested Disco, Bionic
* Distinguish package list: *-minimal.list and *-desktop.list
* Enable Wireguard back which was removed by mistake. https://github.com/armbian/build/issues/1471
* Having minbase debootstrap variant for all will require further adjustements with current package base - backward compatibility. Minimal image is now Python free but need further testings ...
* Add wireless-regdb and crda to the pakage base, fix Ubuntu keyring warning while debootstrap.
* Add figlet to sort out missing fonts
* Moving few packages here and there. Bugfix when creating a cache package list
* Manually compared base images - they are the same with small insignificant difference. Minimal image has to be futher tuned
* Adjustements for bash powered lsb_release, adding some needed packages
* Fixed (no) network problems on Bionic/Disco
* Add rsync to debootstrap_list and few minor fixes
* Adjust text in lsb_release
* Olimex Micro A20: fix wrong boot config
* Remove duplicate depenedency
* Odroid C1: adjust kernel config
* Initial Mvebu RFC https://github.com/armbian/build/issues/1426
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu: add missing patches
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu: change making u-boot targets to standard way, adjust patches and config
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* helios4: set default branch to use U-Boot 2018.11
Switch over to U-Boot 2018.11 that has been used for some time in next
branch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: Enable DEV branch
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: Add RTC support on Clearfog and Helios4
Added DM driver for mvebu RTC and enable it on Clearfog and Helios4
configuration.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* add boot-marvell.cmd backward compatibility
The patches added missing variable that used on boot-marvell.cmd and
also adjust the some memory addresses to prevent crash due to usage of
fdt_high and initrd_high.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios4: Added SPI NOR flash target
Build bootable SPI NOR flash image.
Change the boot order to USB -> SATA -> MMC
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Restore SPI support on U-Boot 2019.04
* mvebu: kernel: Added Wake-On-GPIO and WoL support
The patch set was missing during transition.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* [#1429] SolidRun's ARMADA A388 SOM U-Boot ODT Update
Old versions of U-Boot did not configure correctly the ODT on data
signals of DDR RAM on SolidRun's ARMADA A388 SOMs.
According to SolidRun Knowledge Base, the changes already pushed to
mainline U-Boot. But then it was overwritten when Marvell DDR Training
Tool updated
[URL]
https://developer.solid-run.com/knowledge-base/armada-38x-som-u-boot-odt-update/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* [#1429] mvebu: u-boot: Add revision id for Armada 38x B0
Added patch for SolidRun U-Boot v2018.01 and
for Helios4 U-Boot v2018.11
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* clearfog: Added SPI NOR flash target
Build bootable SPI NOR flash image.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: clearfog: DEV branch use mainline U-Boot
Also move clearfog base patch into its own board folder.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: enable U-Boot uart target
Normal MMC image can be used for uart boot using following command:
./tools/kwboot -b u-boot-spl.kwb /dev/ttyUSBX
But on Helios4, the SPL failed to continue the booting process if ECC is
enabled, so disable it.
Since the usage of uart boot is more for rescue/debug, disable autoboot.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: NEXT branch use mainline U-Boot
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: fix fancontrol related bug during buster testing
- On kernel 4.19, cpu thermal sensor changed the name from
armada_thermal into f10e4078.thermal. Added this new name to udev rules
- Since DEFAULT branch now use kernel 4.14, update fancontrol
configuration
- Load lm75 kernel module
- On kernel 4.19, cpu temp reading about 20 degree C lower, update
fancontrol configuration.
[URL]
https://forum.armbian.com/topic/10214-clearfogpro-possible-change-in-temperature-reporting-between-414next-and-419dev
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: Override vendor provided fancontrol unit
systemd emit following message on dmesg
systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/fancontrol.pid \xe2\x86\x92 /run/fancontrol.pid; please update
the unit file accordingly.
Override and change the value in the unit file to remove the message.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: DEV branch use its own u-boot patch folder
The patches are copied over from u-boot-mvebu-next
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: u-boot: Make clearfog model distinction more obvious
While at it, also change SerDes LANE4 into USB 3.0 on Clearfog Base.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* lib: Use apt-get install instead of dpkg on install_deb_chroot()
dpkg -i does not install dependencies required by the package.
This is needed if the BSP package requires other package that is not
installed during debootstrap.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: mvebu: helios4: Move various tweak to family_tweak_bsp()
Various tweak in family_tweaks_s() only applied to SD card image.
Move it to family_tweaks_bsp() so it will also included on the BSP
package and applied to existing user.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: mvebu: helios4: Add /etc/modules to BSP
On kernel 4.19, user need to modify the /etc/modules to add lm75 kernel
module. Pack the file into BSP so user no longer needed to modify it.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: kernel: Make zbud as built-in module
To remove the following error:
[ 1.705485] zswap: default zpool zbud not available
[ 1.705488] zswap: pool creation failed
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* bootscripts: mvebu: Add default value for spi_workaround
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: kernel: Backport armada_thermal changes to 4.14 (#1452)
On kernel 4.19, armada_thermal driver has been fixed to address
Marvell's Errata #132698 (The changes first appear on LK 4.16). The
result is temperature reading is around 20 degree Celsius lower.
Currently armbian-motd apply -20C tweak for both LK 4.14 and LK 4.19
which is incorrect. Instead of adding some logic on what condition to
apply the tweak, it is better to remove the tweak and patch the kernel
instead.
Revert commit b3dd4e9 ("[ mvebu ] Put back Armada temperature tweak in
motd")
which is part of #1421 solution.
[URL]
https://forum.armbian.com/topic/10214-clearfogpro-possible-change-in-temperature-reporting-between-414next-and-419dev/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: unified fancontrol config
Since LK 4.14 on DEFAULT branch already patched and the temp reading is
same as LK 4.19 on NEXT branch, it is no longer needed to separate
fancontrol configuration file.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: helios4: Remove rev id patch
The patch is already applied in helios4 repo, no need to have it in
armbian.
This revert helios4 part of commit 7411c55
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: clearfog: enable PCIe support and PCIe reset
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: clearfog: add boot-marvell.cmd backward compatibility
The patches added missing variable that used on boot-marvell.cmd and
also adjust the some memory addresses to prevent crash due to usage of
fdt_high and initrd_high.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: tweak regarding temperature setting
Make fan speed similar compared to pre-patched armada-thermal. Target
PWM value around 70 during idle.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: sources: clearfog to use u-boot 2018.01 for NEXT branch
This changes also affect Helios4. Moved the shared U-Boot source setting
back to Helios4 for NEXT branch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: boards: build Stretch image for Clearfog and Helios4
Also remove DEV from Helios4 CLI_TARGET
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: mvebu-next: Disable access to SPI Flash
User need to set spi_workaround=yes to enable SPI Flash access and lost
access to internal SATA.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu-next: adjust kernel config
* mvebu-dev: bump to 5.2 and adjust kernel configuraion. Tested for building.
* Adjust kernel config, add AUFS
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu-next: Adjust kernel config, add debug GPIO
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu-dev: separate Clearfog Base U-boot configuration file and patch
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
some patches will create new files, they can be removed by `git clean -qdf`
but when repo has update, git clean is forgot, thus leave new files still in repo.
add git clean back.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
defualt DNS for prebuilt rootfs is 1.0.0.1
when this DNS is not accessable, eg. due to proxy.
network operation in chroot will not available.
use alternative DNS in variable NAMESERVER.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Unified name for sha file.
* Better information about build in armbian.txt
* armbianEnv.txt from userpatches folder
* Better armbian.txt.
* Lost second argument for fingerprint_image (armbian.txt)
* Docker: a chance to rebuild docker image
when Dockerfile is updated, docker image will not be rebuilt,
let armbian docker image tag with framework version, thus has
a chance to rebuild it.
V2: use VERSION file to track build script version.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Docker: use upgrade instead of dist-upgrade to speed up docker build
this patch also change to use apt instead of apt-get
when compile in docker, it will run apt update&&upgrade everytime.
this is very time consuming.
apt-get dist-upgrade will not upgrade packages, thus will make build framework
do upgrade each time.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Default config as symlink for comfort switching between several custom boards.
* Better metadata for kernel packages.
* Local changes with detailed git diff.
* Support for gz and bz2 compression (supported by balenaEtcher).
Support for generation sha without 7z compression.
Bug fix for current directory changing in 7z compression.
* Remove bzip2 and use fast pigz for gziping.
* Deleted typo with "gz" in 7z section.
Separated parameter for gpg.
* Information about exit command.
- change console welcome text
- changed display manager to lightdm by default and remove nodm completly
- desktop login manager enabled by default, toogle can be done with armbian-config
- added URL to the build script and commit hash to /etc/armbian-release file
- added debconf-utils,html2text,mmc-utils,sunxi-tools to the base and additional pkg list
- added synaptic package manager and onboard keyboard to the desktop base
- changed motd console welcome text to: Welcome to Debian Stretch with Armbian Linux 5.1.6-sunxi
- added "logout" to the panel/menu
- added normal users to additional groups: disk tty users games
* Adjust tabs and alter displaying build options at the end - hide empty ones
* Fix wrong MOTD message, adjust logic to autologin by default and request login for both notebooks
* Making fs cache naming more intuitive, rename script
* Move additional kernel drivers into separate file. Add AUFS for K5.1 this way, attach wireguard sources to last known working tag. master is broken atm
* Add two more extra wireless drivers 88x2BU, (improved) 8811EU and introduce switch EXTRAWIFI which is enabled by default
* Move 8812AU to the same version we have now. More recent has some performance issues in AP mode. Adjust configuration, add mvebut-dev 5.1.y kernel
* Enable Wireguard also on 3.10.y since it was fixed upstream. Attach bach to master branch since its working now
* Rockchip64 & RK3399 - upstream patches and remove deprecated patches, mvebu64 add DEV kernel attached to 5.1.y
* Enable BT on Tinkerboard CLI images as well
* cubox-i move to 5.1.y and enable missing HDMI
* Bugfixes for adding wireless driver to Kconfig. Adjusted RK3399 kernel due to upstream changes at FriendlyARM - does not boot yet. Changes has to be extract from their commits. Removed patches with RTL8188EU since we add more recent driver with a new precedure. Small fixes mvebu-default, udoo-next, s56818-next, ... remove deprecated patches.
* Boot-able RK3399-default config, add upstream patches for K4.4.y mvebu-default/udoo-next
* Adjust overclocking patch to meet upstream changes
* Odroid XU4 - remove deprecated kernel patches
With some docker CLI version, `stty size` in the container will return `0 0`,
which causes `dialog` to fail. This commit fixes that by setting the actual
terminal size.
For more infor, see:
https://github.com/docker/for-linux/issues/314
- changed display manager to lightdm by default and remove nodm completly
- desktop login manager enabled by default, toogle can be done with armbian-config
- added URL to the build script and commit hash to /etc/armbian-release file
- added debconf-utils,html2text,mmc-utils,sunxi-tools to the base and additional pkg list
- added synaptic package manager and onboard keyboard to the desktop base
- changed motd console welcome text to: Welcome to Debian Stretch with Armbian Linux 5.1.6-sunxi
- added "logout" to the panel/menu
- added normal users to additional groups: disk tty users games
* [ general ] Change Toolchain download method. Introduce torrent downloads by using Aria2. If torrent download fails it proceeds to download from servers. It can download from all mirrors at once, so download speed is dramatically increased. @mzhboy DOWNLOAD_MIRROR parameter is not needed here anymore. The same method is used to download rootfilesystem cache. Based on ideas from here https://github.com/armbian/build/pull/1364
* Added yet another mirror for speeding up the download process, few small adjustements for torrent downloading
* Optimising direct download when DOWNLOAD_MIRROR is set to 'china' due to aria2 download limitations
* Both mirrors support HTTPS, changing
The packages 'recommend' python3-apt, while it simply does not work
without this package:
Traceback (most recent call last):
File "/usr/lib/armbian/armbian-apt-updates", line 25, in <module>
import apt_pkg
ModuleNotFoundError: No module named 'apt_pkg'
- set to `google` to use mirror provided by Google, the same as
`USE_MAINLINE_GOOGLE_MIRROR=yes`.
- set to `tuna` to use mirror provided by tsinghua university.
- leave it unset to use offical `git.kernel.org`.
* downloader aria2 replace curl
aria2 is a fast downloader and it can do much more than curl
- skip download when target file exists
- restart an interrupted download session
- multithreading
* remove duplicate download item
* change btrfs compression to zstd and no force compression
* mkfs.btrfs options '--data single --metadata single --label btrfs'
disable dup(duplication) on microsd card
* [fstab] change mountopts[btrfs] compression method to zstd
lzo is no fater than zstd because the low 4k write performance on my
Samsung EVO+ 32GB microsd card.
meanwhile the best io size is above 32k based on benchmark
* replace dd with truncate, create a sparse disk image
* create btrfs subvolume by default
subvolume @ as rootfs, mount at /
subvolume @home as /home, mount at /home
* fix extraargs in armbianEnv.txt
* remove tmpfs mount on /tmp
A zram block device will mount on /tmp by
/usr/lib/armbian/armbian-zram-config.
And instead, mount /media as tmpfs.
* [rsync] add '--inplace' option, optimize for btrfs
* [general.sh] change ntp server to pool.ntp.org
* [general] new option to setup btrfs compression method
for support old and boring 3.x kernels
* [general] set btrfs space cache based kervel version
kernel version above 4.5 select 'v2' as default
* [btrfs] BTRFS_COMPRESSION accept compression ratio
BTRFS_COMPRESSION=zlib
BTRFS_COMPRESSION=zstd:5
BTRFS_COMPRESSION=zstd:12 are acceptable
* [btrfs] set btrfs compression to lzo when input is illegal
* [general] new option DOWNLOAD_MIRROR to select download mirror
current DOWNLOAD_MIRROR=china is used
the mirror is provided by tsinghua university
* [general] replace USE_MAINLINE_GOOGLE_MIRROR with MAINLINE_MIRROR
MAINLINE_MIRROR=google, use google provided mirror
MAINLINE_MIRROR=tuna, use tsinghua provided mirror
leave it empty, use official git.kernel.org
* fix btrfs default compression
* display $fscreateopt
* display_alert BTRFS_COMPRESSION
* try fix BTRFS_COMPRESSION variable not working
* debug fetch_from_repo
* configuration.sh debug BTRFS_COMPRESION
* update logic
* debug checking btrfs compression
* fix variable check,fix local variable usage
* [general] replace USE_MAINLINE_GOOGLE_MIRROR with MAINLINE_MIRROR
MAINLINE_MIRROR=google, use google provided mirror
MAINLINE_MIRROR=tuna, use tsinghua provided mirror
leave it empty, use official git.kernel.org
* [general] new option DOWNLOAD_MIRROR to select download mirror
current DOWNLOAD_MIRROR=china is used
the mirror is provided by tsinghua university
* Revert "try fix BTRFS_COMPRESSION variable not working"
This reverts commit 9814cfb054.
* Revert "debug fetch_from_repo"
This reverts commit ba571f0d89.
* add default compression method for mountopts
* remove useless var
* remove debug
* remove debug
* [general] set btrfs space cache based on kernel version
kernel version above 4.5 select 'v2' as default,
below 4.5 select 'v1' as default
* [general] reintroduce USE_MAINLINE_GOOGLE_MIRROR
* [general] case replaces 'if xx ;elif xxx;fi'
* [general] fix always downloading linux-firmware.git
clone to new dir 'linux-firmware-git' instead the old '$plugin_dir/lib/firmware'
,and then copy files as hardlinks.
* [general] create soft link instead of moving directory
* [btrfs] change rootfs subvolume name to @$RELEASE
now, the rootfs subvolume looks like @stretch,@bionic
it is possible to use different distribution in the same btrfs
partition.
Currently, compilation errors from the standard error channel
are sent to standard output, and then the shared stream
can be routed to the $DEST/debug/compilation.log file or not.
As a result, we can see either empty compilation.log file,
or a file containing a million lines of total output.
This behavior makes little sense.
After applying this patch, compilation errors
will always be sent to $DIST/debug/compilation.log
The file will look something like this:
----------------------------------------------------------------
== atf ==
== u-boot ==
.config:1253:warning: override: reassigning to symbol BOOTDELAY
== kernel ==
In file included from ./include/linux/kernel.h:11:0,
from ./include/linux/clk.h:16,
from drivers/iio/adc/sun4i-gpadc-iio.c:25:
......
---
add --keyserver-options when http_proxy env is set.
for docker build, need to pass http_proxy to docker
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
Further I introduced the variable CRYPTROOT_PARAMETERS to have the ability to pass more options to the cryptsetup command.
I've test this on an Odroid HC2 (XU4) with default kernel configuration, full OS image, "next" branch and stretch as server:
- default without encryption
- encryption with user sepcific cryptsetup parameters
- encryption without user specific cryptsetup parameters
* helios4: next branch use u-boot 2018
use new u-boot based on upstream 2018
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios4: Tweak fancontrol configuration
Adjusted MINSTART and MINSTOP to suit both old and new fan.
Adjusted TEMP threshold so fan would stop or run in minimal speed when
the system idle.
Fixed wrong MINPWM value.
URL:https://wiki.kobol.io/pwm/#configuration-file
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: mvebu-next: use upstream helios4 dts
Helios4 device tree has been merged on upstream since 4.19.
Rework the patch to produce same device tree.
URL:https://patchwork.kernel.org/patch/10449393/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: Use boot-mvebu-next bootscript
Use boot-mvebu-next.cmd that make use of upstream's Generic Distro
Configuration.
Since loadaddr and fdt_addr varibales are no longer required, remove the
patch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue
Concurrent access on SPI NOR and SATA drives can lead to unstable SATA.
Therefore as workaround, disable SATA controller when SPI flash access
is needed and make it as user configurable item in armbianEnv.txt
This workaround might applies to Clearfog too.
Refer to
Commit 59af84c07c ("Helios4: Add SPI bootloader install feature
(#1126)")
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Bootscripts: Fixed boot-mvebu-next.cmd
The environment setting (armbianEnv.txt) is loaded to RAM located on
${load_addr} but the env import use wrong address (${pxefile_addr_r}).
bootargs still expect ${boot_interface} which carried over from boot-
marvell.cmd. Upstream's distro configuration use ${devtype} instead.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* uboot: mvebu-next: only apply DT fixup script if it exists
* [ buildscript ] Add FORCE_BOOTSCRIPT_UPDATE option
If enabled bootscript will get updated during bsp upgrade.
* Helios4: Enable FORCE_BOOTSCRIPT_UPDATE by default in board config.
* Helios4: Added boot-marvell.cmd compability to u-boot 2018
Revert the changes to use boot-mvebu-next.cmd instead of boot-
marvell.cmd to prevent unbootable system due to incompatibility between
u-boot 2013.01 and boot-mvebu-next.cmd
This reverts commit 0f17ecb233 ("Helios4: Use boot-mvebu-next
bootscript")
U-Boot 2018 will failed load dtb and script due to missing some
variables on boot-marvell.cmd. This will render the system unbootable.
Re-added and update loading-boot-scr.patch for backward compatibility
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: Add workaround for SPI and SATA concurrent access issue
Concurrent access on SPI NOR and SATA drives can lead to unstable SATA.
Therefore as workaround, disable SATA controller when SPI flash access
is needed and make it as user configurable item in armbianEnv.txt
This workaround might applies to Clearfog too.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: Add U-Boot SPI
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: Add SPI bootloader install feature
This will allow to use nand-sata-install to perform the following operations on Helios4 :
- Install bootloader to SPI NOR Flash (Option 5 in Menu).
- Copy RootFS to USB storage in order to boot from SPI with RootFS on USB (Option 6 in Menu).
* Unmount temp mount points in create_armbian() instead of hardcoded /dev/sda
