Add support for Odroid c4 (#1923)
* meson-sm1: use amlogic-boot-fip to generate boot binary for SM1 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> * patch: add Linux and U-Boot patches Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> * configs: enable Odroid-C4 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
Neil Armstrong
GitHub
parent
e81737a9b6
commit
07447294c7
7
config/boards/odroidc4.conf
Normal file
7
config/boards/odroidc4.conf
Normal file
@ -0,0 +1,7 @@
|
||||
# S905X3 quad core 4GB RAM SoC eMMC GBE USB3 SPI
|
||||
BOARD_NAME="Odroid C4"
|
||||
BOARDFAMILY="meson-sm1"
|
||||
BOOTCONFIG="odroid-c4_defconfig"
|
||||
KERNEL_TARGET="current,dev"
|
||||
FULL_DESKTOP="yes"
|
||||
SERIALCON="ttyAML0"
|
||||
@ -68,6 +68,82 @@ uboot_gxl_postprocess()
|
||||
--bl33 bl33.bin.enc
|
||||
}
|
||||
|
||||
# this helper function includes postprocess for u200 and its variants.
|
||||
# $1 PATH for uboot blob repo
|
||||
# $2 family g12a or g12b
|
||||
uboot_g12_postprocess()
|
||||
{
|
||||
mv u-boot.bin bl33.bin
|
||||
|
||||
$1/blx_fix.sh $1/bl30.bin \
|
||||
zero_tmp \
|
||||
bl30_zero.bin \
|
||||
$1/bl301.bin \
|
||||
bl301_zero.bin \
|
||||
bl30_new.bin bl30
|
||||
|
||||
$1/blx_fix.sh $1/bl2.bin \
|
||||
zero_tmp \
|
||||
bl2_zero.bin \
|
||||
$1/acs.bin \
|
||||
bl21_zero.bin \
|
||||
bl2_new.bin bl2
|
||||
|
||||
$1/aml_encrypt_$2 --bl30sig \
|
||||
--input bl30_new.bin \
|
||||
--output bl30_new.bin.g12.enc \
|
||||
--level v3
|
||||
$1/aml_encrypt_$2 --bl3sig \
|
||||
--input bl30_new.bin.g12.enc \
|
||||
--output bl30_new.bin.enc \
|
||||
--level v3 --type bl30
|
||||
$1/aml_encrypt_$2 --bl3sig \
|
||||
--input $1/bl31.img \
|
||||
--output bl31.img.enc \
|
||||
--level v3 --type bl31
|
||||
$1/aml_encrypt_$2 --bl3sig \
|
||||
--input bl33.bin \
|
||||
--compress lz4 \
|
||||
--output bl33.bin.enc \
|
||||
--level v3 --type bl33
|
||||
$1/aml_encrypt_$2 --bl2sig \
|
||||
--input bl2_new.bin \
|
||||
--output bl2.n.bin.sig
|
||||
if [ -e $1/lpddr3_1d.fw ]
|
||||
then
|
||||
$1/aml_encrypt_g12a --bootmk --output u-boot.bin \
|
||||
--bl2 bl2.n.bin.sig \
|
||||
--bl30 bl30_new.bin.enc \
|
||||
--bl31 bl31.img.enc \
|
||||
--bl33 bl33.bin.enc \
|
||||
--ddrfw1 $1/ddr4_1d.fw \
|
||||
--ddrfw2 $1/ddr4_2d.fw \
|
||||
--ddrfw3 $1/ddr3_1d.fw \
|
||||
--ddrfw4 $1/piei.fw \
|
||||
--ddrfw5 $1/lpddr4_1d.fw \
|
||||
--ddrfw6 $1/lpddr4_2d.fw \
|
||||
--ddrfw7 $1/diag_lpddr4.fw \
|
||||
--ddrfw8 $1/aml_ddr.fw \
|
||||
--ddrfw9 $1/lpddr3_1d.fw \
|
||||
--level v3
|
||||
else
|
||||
$1/aml_encrypt_g12a --bootmk --output u-boot.bin \
|
||||
--bl2 bl2.n.bin.sig \
|
||||
--bl30 bl30_new.bin.enc \
|
||||
--bl31 bl31.img.enc \
|
||||
--bl33 bl33.bin.enc \
|
||||
--ddrfw1 $1/ddr4_1d.fw \
|
||||
--ddrfw2 $1/ddr4_2d.fw \
|
||||
--ddrfw3 $1/ddr3_1d.fw \
|
||||
--ddrfw4 $1/piei.fw \
|
||||
--ddrfw5 $1/lpddr4_1d.fw \
|
||||
--ddrfw6 $1/lpddr4_2d.fw \
|
||||
--ddrfw7 $1/diag_lpddr4.fw \
|
||||
--ddrfw8 $1/aml_ddr.fw \
|
||||
--level v3
|
||||
fi
|
||||
}
|
||||
|
||||
write_uboot_platform()
|
||||
{
|
||||
dd if=$1/u-boot.bin of=$2 bs=1 count=442 conv=fsync > /dev/null 2>&1
|
||||
|
||||
13
config/sources/families/meson-sm1.conf
Normal file
13
config/sources/families/meson-sm1.conf
Normal file
@ -0,0 +1,13 @@
|
||||
source "${BASH_SOURCE%/*}/include/meson64_common.inc"
|
||||
|
||||
family_tweaks()
|
||||
{
|
||||
:
|
||||
}
|
||||
|
||||
uboot_custom_postprocess()
|
||||
{
|
||||
if [[ $BOARD == odroidc4 ]]; then
|
||||
uboot_g12_postprocess $SRC/cache/sources/amlogic-boot-fip/odroid-c4 g12a
|
||||
fi
|
||||
}
|
||||
@ -457,6 +457,16 @@ odroidn2 current bullseye cli stable yes
|
||||
odroidn2 current focal cli stable yes
|
||||
odroidn2 dev focal minimal beta yes
|
||||
|
||||
# Odroid C4
|
||||
|
||||
odroidc4 current buster cli stable yes
|
||||
odroidc4 current buster desktop stable yes
|
||||
odroidc4 current stretch cli stable yes
|
||||
odroidc4 current bionic desktop stable yes
|
||||
odroidc4 current bullseye cli stable yes
|
||||
odroidc4 current focal cli stable yes
|
||||
odroidc4 dev focal minimal beta yes
|
||||
|
||||
# Odroid XU4
|
||||
|
||||
odroidxu4 legacy buster cli stable yes
|
||||
|
||||
@ -410,6 +410,7 @@ if [[ $IGNORE_UPDATES != yes ]]; then
|
||||
fetch_from_repo "https://github.com/MarvellEmbeddedProcessors/binaries-marvell" "marvell-binaries" "branch:binaries-marvell-armada-18.12"
|
||||
fetch_from_repo "https://github.com/armbian/odroidc2-blobs" "odroidc2-blobs" "branch:master"
|
||||
fetch_from_repo "https://github.com/armbian/testings" "testing-reports" "branch:master"
|
||||
fetch_from_repo "https://gitlab.com/superna9999/amlogic-boot-fip" "amlogic-boot-fip" "branch:master"
|
||||
fi
|
||||
|
||||
compile_sunxi_tools
|
||||
|
||||
@ -0,0 +1,435 @@
|
||||
From e2ee8474ca020935d2dee7cf3493a5d5084dc975 Mon Sep 17 00:00:00 2001
|
||||
From: Dongjin Kim <tobetter@gmail.com>
|
||||
Date: Sun, 15 Mar 2020 02:15:06 +0900
|
||||
Subject: [PATCH] arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4
|
||||
|
||||
Add the board support for the Hardkernel Odroid-C4 single board computer.
|
||||
|
||||
The Odroid-C4 is the Odroid-C2 successor with same form factor, but using
|
||||
a modern Amlogic S905X3 (SM1) SoC and 4x USB3 ports.
|
||||
|
||||
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
|
||||
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
||||
---
|
||||
arch/arm64/boot/dts/amlogic/Makefile | 1 +
|
||||
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 399 ++++++++++++++++++
|
||||
2 files changed, 400 insertions(+)
|
||||
create mode 100755 arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
|
||||
|
||||
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
|
||||
index 84afecba9..1d2fe850e 100644
|
||||
--- a/arch/arm64/boot/dts/amlogic/Makefile
|
||||
+++ b/arch/arm64/boot/dts/amlogic/Makefile
|
||||
@@ -36,3 +36,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
|
||||
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
|
||||
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
|
||||
new file mode 100755
|
||||
index 000000000..221572a77
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
|
||||
@@ -0,0 +1,399 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+/*
|
||||
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "meson-sm1.dtsi"
|
||||
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
+#include <dt-bindings/leds/common.h>
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "hardkernel,odroid-c4", "amlogic,sm1";
|
||||
+ model = "Hardkernel ODROID-C4";
|
||||
+
|
||||
+ aliases {
|
||||
+ serial0 = &uart_AO;
|
||||
+ ethernet0 = ðmac;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ memory@0 {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x0 0x0 0x0 0x40000000>;
|
||||
+ };
|
||||
+
|
||||
+ emmc_pwrseq: emmc-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-emmc";
|
||||
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ led-blue {
|
||||
+ color = <LED_COLOR_ID_BLUE>;
|
||||
+ function = LED_FUNCTION_STATUS;
|
||||
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ panic-indicator;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tflash_vdd: regulator-tflash_vdd {
|
||||
+ compatible = "regulator-fixed";
|
||||
+
|
||||
+ regulator-name = "TFLASH_VDD";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ tf_io: gpio-regulator-tf_io {
|
||||
+ compatible = "regulator-gpio";
|
||||
+
|
||||
+ regulator-name = "TF_IO";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
|
||||
+ gpios-states = <0>;
|
||||
+
|
||||
+ states = <3300000 0>,
|
||||
+ <1800000 1>;
|
||||
+ };
|
||||
+
|
||||
+ flash_1v8: regulator-flash_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "FLASH_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ main_12v: regulator-main_12v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "12V";
|
||||
+ regulator-min-microvolt = <12000000>;
|
||||
+ regulator-max-microvolt = <12000000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vcc_5v: regulator-vcc_5v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "5V";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <&main_12v>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8: regulator-vcc_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VCC_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vcc_3v3: regulator-vcc_3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VCC_3V3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vddao_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ /* FIXME: actually controlled by VDDCPU_B_EN */
|
||||
+ };
|
||||
+
|
||||
+ vddcpu: regulator-vddcpu {
|
||||
+ /*
|
||||
+ * MP8756GD Regulator.
|
||||
+ */
|
||||
+ compatible = "pwm-regulator";
|
||||
+
|
||||
+ regulator-name = "VDDCPU";
|
||||
+ regulator-min-microvolt = <721000>;
|
||||
+ regulator-max-microvolt = <1022000>;
|
||||
+
|
||||
+ vin-supply = <&main_12v>;
|
||||
+
|
||||
+ pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
+ pwm-dutycycle-range = <100 0>;
|
||||
+
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ hub_5v: regulator-hub_5v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "HUB_5V";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc_5v>;
|
||||
+
|
||||
+ /* Connected to the Hub CHIPENABLE, LOW sets low power state */
|
||||
+ gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ usb_pwr_en: regulator-usb_pwr_en {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "USB_PWR_EN";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc_5v>;
|
||||
+
|
||||
+ /* Connected to the microUSB port power enable */
|
||||
+ gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ vddao_1v8: regulator-vddao_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VDDAO_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vddao_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vddao_3v3: regulator-vddao_3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VDDAO_3V3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&main_12v>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ hdmi-connector {
|
||||
+ compatible = "hdmi-connector";
|
||||
+ type = "a";
|
||||
+
|
||||
+ port {
|
||||
+ hdmi_connector_in: endpoint {
|
||||
+ remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu1 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU1_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu2 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU2_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu3 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU3_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&ext_mdio {
|
||||
+ external_phy: ethernet-phy@0 {
|
||||
+ /* Realtek RTL8211F (0x001cc916) */
|
||||
+ reg = <0>;
|
||||
+ max-speed = <1000>;
|
||||
+
|
||||
+ reset-assert-us = <10000>;
|
||||
+ reset-deassert-us = <30000>;
|
||||
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
+
|
||||
+ interrupt-parent = <&gpio_intc>;
|
||||
+ /* MAC_INTR on GPIOZ_14 */
|
||||
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+ðmac {
|
||||
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ status = "okay";
|
||||
+ phy-mode = "rgmii";
|
||||
+ phy-handle = <&external_phy>;
|
||||
+ amlogic,tx-delay-ns = <2>;
|
||||
+};
|
||||
+
|
||||
+&gpio {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIOZ */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOH */
|
||||
+ "", "", "", "", "",
|
||||
+ "PIN_36", /* GPIOH_5 */
|
||||
+ "PIN_26", /* GPIOH_6 */
|
||||
+ "PIN_32", /* GPIOH_7 */
|
||||
+ "",
|
||||
+ /* BOOT */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOC */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOA */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "",
|
||||
+ "PIN_27", /* GPIOA_14 */
|
||||
+ "PIN_28", /* GPIOA_15 */
|
||||
+ /* GPIOX */
|
||||
+ "PIN_16", /* GPIOX_0 */
|
||||
+ "PIN_18", /* GPIOX_1 */
|
||||
+ "PIN_22", /* GPIOX_2 */
|
||||
+ "PIN_11", /* GPIOX_3 */
|
||||
+ "PIN_13", /* GPIOX_4 */
|
||||
+ "PIN_7", /* GPIOX_5 */
|
||||
+ "PIN_33", /* GPIOX_6 */
|
||||
+ "PIN_15", /* GPIOX_7 */
|
||||
+ "PIN_19", /* GPIOX_8 */
|
||||
+ "PIN_21", /* GPIOX_9 */
|
||||
+ "PIN_24", /* GPIOX_10 */
|
||||
+ "PIN_23", /* GPIOX_11 */
|
||||
+ "PIN_8", /* GPIOX_12 */
|
||||
+ "PIN_10", /* GPIOX_13 */
|
||||
+ "PIN_29", /* GPIOX_14 */
|
||||
+ "PIN_31", /* GPIOX_15 */
|
||||
+ "PIN_12", /* GPIOX_16 */
|
||||
+ "PIN_3", /* GPIOX_17 */
|
||||
+ "PIN_5", /* GPIOX_18 */
|
||||
+ "PIN_35"; /* GPIOX_19 */
|
||||
+
|
||||
+ /*
|
||||
+ * WARNING: The USB Hub on the Odroid-C4 needs a reset signal
|
||||
+ * to be turned high in order to be detected by the USB Controller
|
||||
+ * This signal should be handled by a USB specific power sequence
|
||||
+ * in order to reset the Hub when USB bus is powered down.
|
||||
+ */
|
||||
+ usb-hub {
|
||||
+ gpio-hog;
|
||||
+ gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
+ output-high;
|
||||
+ line-name = "usb-hub-reset";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&gpio_ao {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIOAO */
|
||||
+ "", "", "", "",
|
||||
+ "PIN_47", /* GPIOAO_4 */
|
||||
+ "", "",
|
||||
+ "PIN_45", /* GPIOAO_7 */
|
||||
+ "PIN_46", /* GPIOAO_8 */
|
||||
+ "PIN_44", /* GPIOAO_9 */
|
||||
+ "PIN_42", /* GPIOAO_10 */
|
||||
+ "",
|
||||
+ /* GPIOE */
|
||||
+ "", "", "";
|
||||
+};
|
||||
+
|
||||
+&hdmi_tx {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ hdmi-supply = <&vcc_5v>;
|
||||
+};
|
||||
+
|
||||
+&hdmi_tx_tmds_port {
|
||||
+ hdmi_tx_tmds_out: endpoint {
|
||||
+ remote-endpoint = <&hdmi_connector_in>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pwm_AO_cd {
|
||||
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ clocks = <&xtal>;
|
||||
+ clock-names = "clkin1";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+/* SD card */
|
||||
+&sd_emmc_b {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&sdcard_c_pins>;
|
||||
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
+ pinctrl-names = "default", "clk-gate";
|
||||
+
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ max-frequency = <200000000>;
|
||||
+ sd-uhs-sdr12;
|
||||
+ sd-uhs-sdr25;
|
||||
+ sd-uhs-sdr50;
|
||||
+ sd-uhs-sdr104;
|
||||
+ disable-wp;
|
||||
+
|
||||
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
+ vmmc-supply = <&tflash_vdd>;
|
||||
+ vqmmc-supply = <&tf_io>;
|
||||
+};
|
||||
+
|
||||
+/* eMMC */
|
||||
+&sd_emmc_c {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
+ pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
+ pinctrl-names = "default", "clk-gate";
|
||||
+
|
||||
+ bus-width = <8>;
|
||||
+ cap-mmc-highspeed;
|
||||
+ mmc-ddr-1_8v;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ max-frequency = <200000000>;
|
||||
+ disable-wp;
|
||||
+
|
||||
+ mmc-pwrseq = <&emmc_pwrseq>;
|
||||
+ vmmc-supply = <&vcc_3v3>;
|
||||
+ vqmmc-supply = <&flash_1v8>;
|
||||
+};
|
||||
+
|
||||
+&uart_AO {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&uart_ao_a_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+};
|
||||
+
|
||||
+&usb {
|
||||
+ status = "okay";
|
||||
+ vbus-supply = <&usb_pwr_en>;
|
||||
+};
|
||||
+
|
||||
+&usb2_phy0 {
|
||||
+ phy-supply = <&vcc_5v>;
|
||||
+};
|
||||
+
|
||||
+&usb2_phy1 {
|
||||
+ /* Enable the hub which is connected to this port */
|
||||
+ phy-supply = <&hub_5v>;
|
||||
+};
|
||||
--
|
||||
2.22.0
|
||||
|
||||
@ -0,0 +1,437 @@
|
||||
From db954006ffe8ce711f43ed562b7fe93ad26bef7d Mon Sep 17 00:00:00 2001
|
||||
From: Dongjin Kim <tobetter@gmail.com>
|
||||
Date: Sun, 15 Mar 2020 02:15:06 +0900
|
||||
Subject: [PATCH 2/2] arm64: dts: meson-sm1: add support for Hardkernel
|
||||
ODROID-C4
|
||||
|
||||
Add the board support for the Hardkernel Odroid-C4 single board computer.
|
||||
|
||||
The Odroid-C4 is the Odroid-C2 successor with same form factor, but using
|
||||
a modern Amlogic S905X3 (SM1) SoC and 4x USB3 ports.
|
||||
|
||||
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
|
||||
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
||||
---
|
||||
arch/arm64/boot/dts/amlogic/Makefile | 1 +
|
||||
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 399 ++++++++++++++++++
|
||||
2 files changed, 400 insertions(+)
|
||||
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
|
||||
|
||||
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
|
||||
index eef0045320f2..5daab72f5639 100644
|
||||
--- a/arch/arm64/boot/dts/amlogic/Makefile
|
||||
+++ b/arch/arm64/boot/dts/amlogic/Makefile
|
||||
@@ -40,4 +40,5 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
|
||||
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
|
||||
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
|
||||
new file mode 100644
|
||||
index 000000000000..4882c604a7e0
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
|
||||
@@ -0,0 +1,399 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+/*
|
||||
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "meson-sm1.dtsi"
|
||||
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
+#include <dt-bindings/leds/common.h>
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "hardkernel,odroid-c4", "amlogic,sm1";
|
||||
+ model = "Hardkernel ODROID-C4";
|
||||
+
|
||||
+ aliases {
|
||||
+ serial0 = &uart_AO;
|
||||
+ ethernet0 = ðmac;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ memory@0 {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x0 0x0 0x0 0x40000000>;
|
||||
+ };
|
||||
+
|
||||
+ emmc_pwrseq: emmc-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-emmc";
|
||||
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ led-blue {
|
||||
+ color = <LED_COLOR_ID_BLUE>;
|
||||
+ function = LED_FUNCTION_STATUS;
|
||||
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ panic-indicator;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ tflash_vdd: regulator-tflash_vdd {
|
||||
+ compatible = "regulator-fixed";
|
||||
+
|
||||
+ regulator-name = "TFLASH_VDD";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ tf_io: gpio-regulator-tf_io {
|
||||
+ compatible = "regulator-gpio";
|
||||
+
|
||||
+ regulator-name = "TF_IO";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
|
||||
+ gpios-states = <0>;
|
||||
+
|
||||
+ states = <3300000 0>,
|
||||
+ <1800000 1>;
|
||||
+ };
|
||||
+
|
||||
+ flash_1v8: regulator-flash_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "FLASH_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ main_12v: regulator-main_12v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "12V";
|
||||
+ regulator-min-microvolt = <12000000>;
|
||||
+ regulator-max-microvolt = <12000000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vcc_5v: regulator-vcc_5v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "5V";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <&main_12v>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8: regulator-vcc_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VCC_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vcc_3v3: regulator-vcc_3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VCC_3V3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vddao_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ /* FIXME: actually controlled by VDDCPU_B_EN */
|
||||
+ };
|
||||
+
|
||||
+ vddcpu: regulator-vddcpu {
|
||||
+ /*
|
||||
+ * MP8756GD Regulator.
|
||||
+ */
|
||||
+ compatible = "pwm-regulator";
|
||||
+
|
||||
+ regulator-name = "VDDCPU";
|
||||
+ regulator-min-microvolt = <721000>;
|
||||
+ regulator-max-microvolt = <1022000>;
|
||||
+
|
||||
+ vin-supply = <&main_12v>;
|
||||
+
|
||||
+ pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
+ pwm-dutycycle-range = <100 0>;
|
||||
+
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ hub_5v: regulator-hub_5v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "HUB_5V";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc_5v>;
|
||||
+
|
||||
+ /* Connected to the Hub CHIPENABLE, LOW sets low power state */
|
||||
+ gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ usb_pwr_en: regulator-usb_pwr_en {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "USB_PWR_EN";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc_5v>;
|
||||
+
|
||||
+ /* Connected to the microUSB port power enable */
|
||||
+ gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ vddao_1v8: regulator-vddao_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VDDAO_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vddao_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vddao_3v3: regulator-vddao_3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VDDAO_3V3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&main_12v>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ hdmi-connector {
|
||||
+ compatible = "hdmi-connector";
|
||||
+ type = "a";
|
||||
+
|
||||
+ port {
|
||||
+ hdmi_connector_in: endpoint {
|
||||
+ remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu1 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU1_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu2 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU2_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu3 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU3_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&ext_mdio {
|
||||
+ external_phy: ethernet-phy@0 {
|
||||
+ /* Realtek RTL8211F (0x001cc916) */
|
||||
+ reg = <0>;
|
||||
+ max-speed = <1000>;
|
||||
+
|
||||
+ reset-assert-us = <10000>;
|
||||
+ reset-deassert-us = <30000>;
|
||||
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
+
|
||||
+ interrupt-parent = <&gpio_intc>;
|
||||
+ /* MAC_INTR on GPIOZ_14 */
|
||||
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+ðmac {
|
||||
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ status = "okay";
|
||||
+ phy-mode = "rgmii";
|
||||
+ phy-handle = <&external_phy>;
|
||||
+ amlogic,tx-delay-ns = <2>;
|
||||
+};
|
||||
+
|
||||
+&gpio {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIOZ */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOH */
|
||||
+ "", "", "", "", "",
|
||||
+ "PIN_36", /* GPIOH_5 */
|
||||
+ "PIN_26", /* GPIOH_6 */
|
||||
+ "PIN_32", /* GPIOH_7 */
|
||||
+ "",
|
||||
+ /* BOOT */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOC */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOA */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "",
|
||||
+ "PIN_27", /* GPIOA_14 */
|
||||
+ "PIN_28", /* GPIOA_15 */
|
||||
+ /* GPIOX */
|
||||
+ "PIN_16", /* GPIOX_0 */
|
||||
+ "PIN_18", /* GPIOX_1 */
|
||||
+ "PIN_22", /* GPIOX_2 */
|
||||
+ "PIN_11", /* GPIOX_3 */
|
||||
+ "PIN_13", /* GPIOX_4 */
|
||||
+ "PIN_7", /* GPIOX_5 */
|
||||
+ "PIN_33", /* GPIOX_6 */
|
||||
+ "PIN_15", /* GPIOX_7 */
|
||||
+ "PIN_19", /* GPIOX_8 */
|
||||
+ "PIN_21", /* GPIOX_9 */
|
||||
+ "PIN_24", /* GPIOX_10 */
|
||||
+ "PIN_23", /* GPIOX_11 */
|
||||
+ "PIN_8", /* GPIOX_12 */
|
||||
+ "PIN_10", /* GPIOX_13 */
|
||||
+ "PIN_29", /* GPIOX_14 */
|
||||
+ "PIN_31", /* GPIOX_15 */
|
||||
+ "PIN_12", /* GPIOX_16 */
|
||||
+ "PIN_3", /* GPIOX_17 */
|
||||
+ "PIN_5", /* GPIOX_18 */
|
||||
+ "PIN_35"; /* GPIOX_19 */
|
||||
+
|
||||
+ /*
|
||||
+ * WARNING: The USB Hub on the Odroid-C4 needs a reset signal
|
||||
+ * to be turned high in order to be detected by the USB Controller
|
||||
+ * This signal should be handled by a USB specific power sequence
|
||||
+ * in order to reset the Hub when USB bus is powered down.
|
||||
+ */
|
||||
+ usb-hub {
|
||||
+ gpio-hog;
|
||||
+ gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
+ output-high;
|
||||
+ line-name = "usb-hub-reset";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&gpio_ao {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIOAO */
|
||||
+ "", "", "", "",
|
||||
+ "PIN_47", /* GPIOAO_4 */
|
||||
+ "", "",
|
||||
+ "PIN_45", /* GPIOAO_7 */
|
||||
+ "PIN_46", /* GPIOAO_8 */
|
||||
+ "PIN_44", /* GPIOAO_9 */
|
||||
+ "PIN_42", /* GPIOAO_10 */
|
||||
+ "",
|
||||
+ /* GPIOE */
|
||||
+ "", "", "";
|
||||
+};
|
||||
+
|
||||
+&hdmi_tx {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ hdmi-supply = <&vcc_5v>;
|
||||
+};
|
||||
+
|
||||
+&hdmi_tx_tmds_port {
|
||||
+ hdmi_tx_tmds_out: endpoint {
|
||||
+ remote-endpoint = <&hdmi_connector_in>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pwm_AO_cd {
|
||||
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ clocks = <&xtal>;
|
||||
+ clock-names = "clkin1";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+/* SD card */
|
||||
+&sd_emmc_b {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&sdcard_c_pins>;
|
||||
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
+ pinctrl-names = "default", "clk-gate";
|
||||
+
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ max-frequency = <200000000>;
|
||||
+ sd-uhs-sdr12;
|
||||
+ sd-uhs-sdr25;
|
||||
+ sd-uhs-sdr50;
|
||||
+ sd-uhs-sdr104;
|
||||
+ disable-wp;
|
||||
+
|
||||
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
+ vmmc-supply = <&tflash_vdd>;
|
||||
+ vqmmc-supply = <&tf_io>;
|
||||
+};
|
||||
+
|
||||
+/* eMMC */
|
||||
+&sd_emmc_c {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
+ pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
+ pinctrl-names = "default", "clk-gate";
|
||||
+
|
||||
+ bus-width = <8>;
|
||||
+ cap-mmc-highspeed;
|
||||
+ mmc-ddr-1_8v;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ max-frequency = <200000000>;
|
||||
+ disable-wp;
|
||||
+
|
||||
+ mmc-pwrseq = <&emmc_pwrseq>;
|
||||
+ vmmc-supply = <&vcc_3v3>;
|
||||
+ vqmmc-supply = <&flash_1v8>;
|
||||
+};
|
||||
+
|
||||
+&uart_AO {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&uart_ao_a_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+};
|
||||
+
|
||||
+&usb {
|
||||
+ status = "okay";
|
||||
+ vbus-supply = <&usb_pwr_en>;
|
||||
+};
|
||||
+
|
||||
+&usb2_phy0 {
|
||||
+ phy-supply = <&vcc_5v>;
|
||||
+};
|
||||
+
|
||||
+&usb2_phy1 {
|
||||
+ /* Enable the hub which is connected to this port */
|
||||
+ phy-supply = <&hub_5v>;
|
||||
+};
|
||||
--
|
||||
2.22.0
|
||||
|
||||
@ -0,0 +1,419 @@
|
||||
From e59c5fca47c82b85f232fc9e182df387d6c34dfd Mon Sep 17 00:00:00 2001
|
||||
From: Christian Hewitt <christianshewitt@gmail.com>
|
||||
Date: Fri, 24 Apr 2020 02:58:30 +0000
|
||||
Subject: [PATCH 1/3] ARM: dts: Import Odroid C4 DT from Linux 5.X
|
||||
|
||||
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
||||
---
|
||||
arch/arm/dts/Makefile | 1 +
|
||||
arch/arm/dts/meson-sm1-odroid-c4.dts | 386 +++++++++++++++++++++++++++
|
||||
2 files changed, 387 insertions(+)
|
||||
create mode 100755 arch/arm/dts/meson-sm1-odroid-c4.dts
|
||||
|
||||
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
|
||||
index 820ee973..7dee4c51 100644
|
||||
--- a/arch/arm/dts/Makefile
|
||||
+++ b/arch/arm/dts/Makefile
|
||||
@@ -154,6 +154,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
|
||||
meson-g12b-odroid-n2.dtb \
|
||||
meson-g12b-a311d-khadas-vim3.dtb \
|
||||
meson-sm1-khadas-vim3l.dtb \
|
||||
+ meson-sm1-odroid-c4.dtb \
|
||||
meson-sm1-sei610.dtb
|
||||
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
|
||||
tegra20-medcom-wide.dtb \
|
||||
diff --git a/arch/arm/dts/meson-sm1-odroid-c4.dts b/arch/arm/dts/meson-sm1-odroid-c4.dts
|
||||
new file mode 100755
|
||||
index 00000000..f4e19710
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/dts/meson-sm1-odroid-c4.dts
|
||||
@@ -0,0 +1,386 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+/*
|
||||
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "meson-sm1.dtsi"
|
||||
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "hardkernel,odroid-c4", "amlogic,sm1";
|
||||
+ model = "Hardkernel ODROID-C4";
|
||||
+
|
||||
+ aliases {
|
||||
+ serial0 = &uart_AO;
|
||||
+ ethernet0 = ðmac;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ memory@0 {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x0 0x0 0x0 0x40000000>;
|
||||
+ };
|
||||
+
|
||||
+ emmc_pwrseq: emmc-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-emmc";
|
||||
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ tflash_vdd: regulator-tflash_vdd {
|
||||
+ compatible = "regulator-fixed";
|
||||
+
|
||||
+ regulator-name = "TFLASH_VDD";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ tf_io: gpio-regulator-tf_io {
|
||||
+ compatible = "regulator-gpio";
|
||||
+
|
||||
+ regulator-name = "TF_IO";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
|
||||
+ gpios-states = <0>;
|
||||
+
|
||||
+ states = <3300000 0>,
|
||||
+ <1800000 1>;
|
||||
+ };
|
||||
+
|
||||
+ flash_1v8: regulator-flash_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "FLASH_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ main_12v: regulator-main_12v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "12V";
|
||||
+ regulator-min-microvolt = <12000000>;
|
||||
+ regulator-max-microvolt = <12000000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vcc_5v: regulator-vcc_5v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "5V";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <&main_12v>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8: regulator-vcc_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VCC_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vcc_3v3: regulator-vcc_3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VCC_3V3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vddao_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ /* FIXME: actually controlled by VDDCPU_B_EN */
|
||||
+ };
|
||||
+
|
||||
+ vddcpu: regulator-vddcpu {
|
||||
+ /*
|
||||
+ * MP8756GD Regulator.
|
||||
+ */
|
||||
+ compatible = "pwm-regulator";
|
||||
+
|
||||
+ regulator-name = "VDDCPU";
|
||||
+ regulator-min-microvolt = <721000>;
|
||||
+ regulator-max-microvolt = <1022000>;
|
||||
+
|
||||
+ vin-supply = <&main_12v>;
|
||||
+
|
||||
+ pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
+ pwm-dutycycle-range = <100 0>;
|
||||
+
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ hub_5v: regulator-hub_5v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "HUB_5V";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc_5v>;
|
||||
+
|
||||
+ /* Connected to the Hub CHIPENABLE, LOW sets low power state */
|
||||
+ gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ usb_pwr_en: regulator-usb_pwr_en {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "USB_PWR_EN";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc_5v>;
|
||||
+
|
||||
+ /* Connected to the microUSB port power enable */
|
||||
+ gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ vddao_1v8: regulator-vddao_1v8 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VDDAO_1V8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vddao_3v3>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ vddao_3v3: regulator-vddao_3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "VDDAO_3V3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&main_12v>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ hdmi-connector {
|
||||
+ compatible = "hdmi-connector";
|
||||
+ type = "a";
|
||||
+
|
||||
+ port {
|
||||
+ hdmi_connector_in: endpoint {
|
||||
+ remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu1 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU1_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu2 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU2_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&cpu3 {
|
||||
+ cpu-supply = <&vddcpu>;
|
||||
+ operating-points-v2 = <&cpu_opp_table>;
|
||||
+ clocks = <&clkc CLKID_CPU3_CLK>;
|
||||
+ clock-latency = <50000>;
|
||||
+};
|
||||
+
|
||||
+&ext_mdio {
|
||||
+ external_phy: ethernet-phy@0 {
|
||||
+ /* Realtek RTL8211F (0x001cc916) */
|
||||
+ reg = <0>;
|
||||
+ max-speed = <1000>;
|
||||
+
|
||||
+ reset-assert-us = <10000>;
|
||||
+ reset-deassert-us = <30000>;
|
||||
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
+
|
||||
+ interrupt-parent = <&gpio_intc>;
|
||||
+ /* MAC_INTR on GPIOZ_14 */
|
||||
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+ðmac {
|
||||
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ status = "okay";
|
||||
+ phy-mode = "rgmii";
|
||||
+ phy-handle = <&external_phy>;
|
||||
+ amlogic,tx-delay-ns = <2>;
|
||||
+};
|
||||
+
|
||||
+&gpio {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIOZ */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOH */
|
||||
+ "", "", "", "", "",
|
||||
+ "PIN_36", /* GPIOH_5 */
|
||||
+ "PIN_26", /* GPIOH_6 */
|
||||
+ "PIN_32", /* GPIOH_7 */
|
||||
+ "",
|
||||
+ /* BOOT */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOC */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIOA */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ "", "", "", "", "", "",
|
||||
+ "PIN_27", /* GPIOA_14 */
|
||||
+ "PIN_28", /* GPIOA_15 */
|
||||
+ /* GPIOX */
|
||||
+ "PIN_16", /* GPIOX_0 */
|
||||
+ "PIN_18", /* GPIOX_1 */
|
||||
+ "PIN_22", /* GPIOX_2 */
|
||||
+ "PIN_11", /* GPIOX_3 */
|
||||
+ "PIN_13", /* GPIOX_4 */
|
||||
+ "PIN_7", /* GPIOX_5 */
|
||||
+ "PIN_33", /* GPIOX_6 */
|
||||
+ "PIN_15", /* GPIOX_7 */
|
||||
+ "PIN_19", /* GPIOX_8 */
|
||||
+ "PIN_21", /* GPIOX_9 */
|
||||
+ "PIN_24", /* GPIOX_10 */
|
||||
+ "PIN_23", /* GPIOX_11 */
|
||||
+ "PIN_8", /* GPIOX_12 */
|
||||
+ "PIN_10", /* GPIOX_13 */
|
||||
+ "PIN_29", /* GPIOX_14 */
|
||||
+ "PIN_31", /* GPIOX_15 */
|
||||
+ "PIN_12", /* GPIOX_16 */
|
||||
+ "PIN_3", /* GPIOX_17 */
|
||||
+ "PIN_5", /* GPIOX_18 */
|
||||
+ "PIN_35"; /* GPIOX_19 */
|
||||
+
|
||||
+ /*
|
||||
+ * WARNING: The USB Hub on the Odroid-C4 needs a reset signal
|
||||
+ * to be turned high in order to be detected by the USB Controller
|
||||
+ * This signal should be handled by a USB specific power sequence
|
||||
+ * in order to reset the Hub when USB bus is powered down.
|
||||
+ */
|
||||
+ usb-hub {
|
||||
+ gpio-hog;
|
||||
+ gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
+ output-high;
|
||||
+ line-name = "usb-hub-reset";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&gpio_ao {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIOAO */
|
||||
+ "", "", "", "",
|
||||
+ "PIN_47", /* GPIOAO_4 */
|
||||
+ "", "",
|
||||
+ "PIN_45", /* GPIOAO_7 */
|
||||
+ "PIN_46", /* GPIOAO_8 */
|
||||
+ "PIN_44", /* GPIOAO_9 */
|
||||
+ "PIN_42", /* GPIOAO_10 */
|
||||
+ "",
|
||||
+ /* GPIOE */
|
||||
+ "", "", "";
|
||||
+};
|
||||
+
|
||||
+&hdmi_tx {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ hdmi-supply = <&vcc_5v>;
|
||||
+};
|
||||
+
|
||||
+&hdmi_tx_tmds_port {
|
||||
+ hdmi_tx_tmds_out: endpoint {
|
||||
+ remote-endpoint = <&hdmi_connector_in>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pwm_AO_cd {
|
||||
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ clocks = <&xtal>;
|
||||
+ clock-names = "clkin1";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+/* SD card */
|
||||
+&sd_emmc_b {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&sdcard_c_pins>;
|
||||
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
+ pinctrl-names = "default", "clk-gate";
|
||||
+
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ max-frequency = <200000000>;
|
||||
+ sd-uhs-sdr12;
|
||||
+ sd-uhs-sdr25;
|
||||
+ sd-uhs-sdr50;
|
||||
+ sd-uhs-sdr104;
|
||||
+ disable-wp;
|
||||
+
|
||||
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
+ vmmc-supply = <&tflash_vdd>;
|
||||
+ vqmmc-supply = <&tf_io>;
|
||||
+};
|
||||
+
|
||||
+/* eMMC */
|
||||
+&sd_emmc_c {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
+ pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
+ pinctrl-names = "default", "clk-gate";
|
||||
+
|
||||
+ bus-width = <8>;
|
||||
+ cap-mmc-highspeed;
|
||||
+ mmc-ddr-1_8v;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ max-frequency = <200000000>;
|
||||
+ disable-wp;
|
||||
+
|
||||
+ mmc-pwrseq = <&emmc_pwrseq>;
|
||||
+ vmmc-supply = <&vcc_3v3>;
|
||||
+ vqmmc-supply = <&flash_1v8>;
|
||||
+};
|
||||
+
|
||||
+&uart_AO {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&uart_ao_a_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+};
|
||||
+
|
||||
+&usb {
|
||||
+ status = "okay";
|
||||
+ vbus-supply = <&usb_pwr_en>;
|
||||
+};
|
||||
+
|
||||
+&usb2_phy0 {
|
||||
+ phy-supply = <&vcc_5v>;
|
||||
+};
|
||||
+
|
||||
+&usb2_phy1 {
|
||||
+ /* Enable the hub which is connected to this port */
|
||||
+ phy-supply = <&hub_5v>;
|
||||
+};
|
||||
--
|
||||
2.22.0
|
||||
|
||||
@ -0,0 +1,238 @@
|
||||
From 9af545e2824df54e8cef7f3a62d96c37360cb0a0 Mon Sep 17 00:00:00 2001
|
||||
From: Christian Hewitt <christianshewitt@gmail.com>
|
||||
Date: Fri, 24 Apr 2020 03:09:12 +0000
|
||||
Subject: [PATCH 2/3] boards: amlogic: add Odroid C4 support
|
||||
|
||||
Odroid C4 is an SM1 device, the board config is adapted from VIM3L and
|
||||
README is based on the README.odroid-n2 from the same vendor.
|
||||
|
||||
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
|
||||
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
||||
---
|
||||
board/amlogic/w400/MAINTAINERS | 1 +
|
||||
board/amlogic/w400/README.odroid-c4 | 134 ++++++++++++++++++++++++++++
|
||||
configs/odroid-c4_defconfig | 62 +++++++++++++
|
||||
3 files changed, 197 insertions(+)
|
||||
create mode 100644 board/amlogic/w400/README.odroid-c4
|
||||
create mode 100644 configs/odroid-c4_defconfig
|
||||
|
||||
diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
|
||||
index 2ff90039..b28dd7f0 100644
|
||||
--- a/board/amlogic/w400/MAINTAINERS
|
||||
+++ b/board/amlogic/w400/MAINTAINERS
|
||||
@@ -6,3 +6,4 @@ F: board/amlogic/w400/
|
||||
F: configs/khadas-vim3_defconfig
|
||||
F: configs/khadas-vim3l_defconfig
|
||||
F: configs/odroid-n2_defconfig
|
||||
+F: configs/odroid-c4_defconfig
|
||||
diff --git a/board/amlogic/w400/README.odroid-c4 b/board/amlogic/w400/README.odroid-c4
|
||||
new file mode 100644
|
||||
index 00000000..b1bca758
|
||||
--- /dev/null
|
||||
+++ b/board/amlogic/w400/README.odroid-c4
|
||||
@@ -0,0 +1,134 @@
|
||||
+U-Boot for ODROID-C4
|
||||
+====================
|
||||
+
|
||||
+ODROID-N2 is a single board computer manufactured by Hardkernel
|
||||
+Co. Ltd with the following specifications:
|
||||
+
|
||||
+ - Amlogic S905X3 Arm Cortex-A55 quad-core SoC
|
||||
+ - 2GB or 4GB LPDDR4 SDRAM
|
||||
+ - Gigabit Ethernet
|
||||
+ - HDMI 2.1 display
|
||||
+ - 40-pin GPIO header
|
||||
+ - 7-pin GPIO expansion header
|
||||
+ - 4x USB 3.0 Host
|
||||
+ - 1x USB 2.0 Host/OTG (micro)
|
||||
+ - eMMC, microSD
|
||||
+ - UART serial
|
||||
+ - Infrared receiver
|
||||
+
|
||||
+Schematics are available on the manufacturer website.
|
||||
+
|
||||
+Currently the U-Boot port supports the following devices:
|
||||
+ - serial
|
||||
+ - eMMC, microSD
|
||||
+ - Ethernet
|
||||
+ - I2C
|
||||
+ - Regulators
|
||||
+ - Reset controller
|
||||
+ - Clock controller
|
||||
+ - ADC
|
||||
+
|
||||
+u-boot compilation
|
||||
+==================
|
||||
+
|
||||
+ > export ARCH=arm
|
||||
+ > export CROSS_COMPILE=aarch64-none-elf-
|
||||
+ > make odroid-c4_defconfig
|
||||
+ > make
|
||||
+
|
||||
+Image creation
|
||||
+==============
|
||||
+
|
||||
+Amlogic doesn't provide sources for the firmware and for tools needed
|
||||
+to create the bootloader image, so it is necessary to obtain them from
|
||||
+the git tree published by the board vendor:
|
||||
+
|
||||
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
+ > wget https://releases.linaro.org/archive/14.04/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2014.04_linux.tar.xz
|
||||
+ > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
+ > tar xvf gcc-linaro-arm-none-eabi-4.8-2014.04_linux.tar.xz
|
||||
+ > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2014.04_linux/bin:$PATH
|
||||
+
|
||||
+ > DIR=odroidc4-u-boot
|
||||
+ > git clone --depth 1 \
|
||||
+ https://github.com/hardkernel/u-boot.git -b odroidg12-v2015.01 \
|
||||
+ $DIR
|
||||
+
|
||||
+ > cd odroidc4-u-boot
|
||||
+ > make odroidc4_defconfig
|
||||
+ > make
|
||||
+ > export UBOOTDIR=$PWD
|
||||
+
|
||||
+ Go back to mainline U-Boot source tree then :
|
||||
+ > mkdir fip
|
||||
+
|
||||
+ > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
|
||||
+ > cp $UBOOTDIR/build/board/hardkernel/odroidc4/firmware/acs.bin fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/bl2.bin fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/bl30.bin fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/bl31.img fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/piei.fw fip/
|
||||
+ > cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
|
||||
+ > cp u-boot.bin fip/bl33.bin
|
||||
+
|
||||
+ > sh fip/blx_fix.sh \
|
||||
+ fip/bl30.bin \
|
||||
+ fip/zero_tmp \
|
||||
+ fip/bl30_zero.bin \
|
||||
+ fip/bl301.bin \
|
||||
+ fip/bl301_zero.bin \
|
||||
+ fip/bl30_new.bin \
|
||||
+ bl30
|
||||
+
|
||||
+ > sh fip/blx_fix.sh \
|
||||
+ fip/bl2.bin \
|
||||
+ fip/zero_tmp \
|
||||
+ fip/bl2_zero.bin \
|
||||
+ fip/acs.bin \
|
||||
+ fip/bl21_zero.bin \
|
||||
+ fip/bl2_new.bin \
|
||||
+ bl2
|
||||
+
|
||||
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
|
||||
+ --output fip/bl30_new.bin.g12a.enc \
|
||||
+ --level v3
|
||||
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
||||
+ --output fip/bl30_new.bin.enc \
|
||||
+ --level v3 --type bl30
|
||||
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
|
||||
+ --output fip/bl31.img.enc \
|
||||
+ --level v3 --type bl31
|
||||
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
|
||||
+ --output fip/bl33.bin.enc \
|
||||
+ --level v3 --type bl33 --compress lz4
|
||||
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
|
||||
+ --output fip/bl2.n.bin.sig
|
||||
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
|
||||
+ --output fip/u-boot.bin \
|
||||
+ --bl2 fip/bl2.n.bin.sig \
|
||||
+ --bl30 fip/bl30_new.bin.enc \
|
||||
+ --bl31 fip/bl31.img.enc \
|
||||
+ --bl33 fip/bl33.bin.enc \
|
||||
+ --ddrfw1 fip/ddr4_1d.fw \
|
||||
+ --ddrfw2 fip/ddr4_2d.fw \
|
||||
+ --ddrfw3 fip/ddr3_1d.fw \
|
||||
+ --ddrfw4 fip/piei.fw \
|
||||
+ --ddrfw5 fip/lpddr4_1d.fw \
|
||||
+ --ddrfw6 fip/lpddr4_2d.fw \
|
||||
+ --ddrfw7 fip/diag_lpddr4.fw \
|
||||
+ --ddrfw8 fip/aml_ddr.fw \
|
||||
+ --ddrfw9 fip/lpddr3_1d.fw \
|
||||
+ --level v3
|
||||
+
|
||||
+and then write the image to SD with:
|
||||
+
|
||||
+ > DEV=/dev/your_sd_device
|
||||
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
||||
diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig
|
||||
new file mode 100644
|
||||
index 00000000..ab7d588e
|
||||
--- /dev/null
|
||||
+++ b/configs/odroid-c4_defconfig
|
||||
@@ -0,0 +1,62 @@
|
||||
+CONFIG_ARM=y
|
||||
+CONFIG_SYS_BOARD="w400"
|
||||
+CONFIG_ARCH_MESON=y
|
||||
+CONFIG_SYS_TEXT_BASE=0x01000000
|
||||
+CONFIG_ENV_SIZE=0x2000
|
||||
+CONFIG_DM_GPIO=y
|
||||
+CONFIG_MESON_G12A=y
|
||||
+CONFIG_NR_DRAM_BANKS=1
|
||||
+CONFIG_DEBUG_UART_BASE=0xff803000
|
||||
+CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
+CONFIG_IDENT_STRING=" odroid-c4"
|
||||
+CONFIG_DEBUG_UART=y
|
||||
+CONFIG_OF_BOARD_SETUP=y
|
||||
+CONFIG_MISC_INIT_R=y
|
||||
+# CONFIG_DISPLAY_CPUINFO is not set
|
||||
+# CONFIG_CMD_BDI is not set
|
||||
+# CONFIG_CMD_IMI is not set
|
||||
+CONFIG_CMD_GPIO=y
|
||||
+# CONFIG_CMD_LOADS is not set
|
||||
+CONFIG_CMD_MMC=y
|
||||
+CONFIG_CMD_USB=y
|
||||
+CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
+# CONFIG_CMD_SETEXPR is not set
|
||||
+CONFIG_CMD_REGULATOR=y
|
||||
+CONFIG_OF_CONTROL=y
|
||||
+CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-odroid-c4"
|
||||
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
+CONFIG_NET_RANDOM_ETHADDR=y
|
||||
+CONFIG_DM_MMC=y
|
||||
+CONFIG_MMC_MESON_GX=y
|
||||
+CONFIG_PHY_REALTEK=y
|
||||
+CONFIG_DM_ETH=y
|
||||
+CONFIG_ETH_DESIGNWARE=y
|
||||
+CONFIG_MESON_G12A_USB_PHY=y
|
||||
+CONFIG_PINCTRL=y
|
||||
+CONFIG_PINCTRL_MESON_G12A=y
|
||||
+CONFIG_POWER_DOMAIN=y
|
||||
+CONFIG_MESON_EE_POWER_DOMAIN=y
|
||||
+CONFIG_DM_REGULATOR=y
|
||||
+CONFIG_DM_REGULATOR_FIXED=y
|
||||
+CONFIG_DM_RESET=y
|
||||
+CONFIG_DEBUG_UART_MESON=y
|
||||
+CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
+CONFIG_DEBUG_UART_SKIP_INIT=y
|
||||
+CONFIG_MESON_SERIAL=y
|
||||
+CONFIG_USB=y
|
||||
+CONFIG_DM_USB=y
|
||||
+CONFIG_USB_XHCI_HCD=y
|
||||
+CONFIG_USB_XHCI_DWC3=y
|
||||
+CONFIG_USB_DWC3=y
|
||||
+# CONFIG_USB_DWC3_GADGET is not set
|
||||
+CONFIG_USB_DWC3_MESON_G12A=y
|
||||
+CONFIG_USB_GADGET=y
|
||||
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
|
||||
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
|
||||
+CONFIG_USB_GADGET_DWC2_OTG=y
|
||||
+CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
|
||||
+CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
+CONFIG_DM_VIDEO=y
|
||||
+CONFIG_VIDEO_MESON=y
|
||||
+CONFIG_VIDEO_DT_SIMPLEFB=y
|
||||
+CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
--
|
||||
2.22.0
|
||||
|
||||
@ -0,0 +1,26 @@
|
||||
From 64017a2cc9e501329016d50b701c5e9a9488991d Mon Sep 17 00:00:00 2001
|
||||
From: Neil Armstrong <narmstrong@baylibre.com>
|
||||
Date: Mon, 2 Sep 2019 15:42:04 +0200
|
||||
Subject: [PATCH 3/3] HACK: mmc: meson-gx: limit to 24MHz
|
||||
|
||||
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
||||
---
|
||||
drivers/mmc/meson_gx_mmc.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
|
||||
index b5f5122b..00bfa324 100644
|
||||
--- a/drivers/mmc/meson_gx_mmc.c
|
||||
+++ b/drivers/mmc/meson_gx_mmc.c
|
||||
@@ -252,7 +252,7 @@ static int meson_mmc_probe(struct udevice *dev)
|
||||
cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT |
|
||||
MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
||||
cfg->f_min = DIV_ROUND_UP(SD_EMMC_CLKSRC_24M, CLK_MAX_DIV);
|
||||
- cfg->f_max = 100000000; /* 100 MHz */
|
||||
+ cfg->f_max = SD_EMMC_CLKSRC_24M;
|
||||
cfg->b_max = 511; /* max 512 - 1 blocks */
|
||||
cfg->name = dev->name;
|
||||
|
||||
--
|
||||
2.22.0
|
||||
|
||||
Loading…
Reference in New Issue
Block a user