* Added Debian 12 Bookworm.
* Link identical
* Make minimal truly minimal again
Move netplan.io to CLI image only
* Add netplan.io to Bullseye standard CLI
Co-authored-by: Konstantin Litvinov <klitvinov@piesoft.us>
Co-authored-by: Igor <igor@armbian.com>
* Initial work on bringing mvebu to 6.0
* Switch mvebu edge to 6.1
* Remove link leftover
* Update kernel config
Co-authored-by: Igor <igor@armbian.com>
* `orangepi5.wip`: initial OrangePi5 support
- OPi5's Xunlong vendor u-boot; override family in board hook
- using original config from vendor, needs `BOOT_SOC`
- OPi5's kernel patches, all extracted from Xunlong's tree
- Only enable the DT patch and the Motorcomm PHY patch
- Other stuff that looks might be useful is grouped in a few other disabled patches
- Most panel/overlays/etc from Xunlong tree not included
- everything is on top of existing `rockchip-rk3588` family,
- thus the same crazy half-android rk kernel tree and ancient rk u-boot
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* `linux-rockchip-rk3588-legacy`: `.config` updated to 5.10.110; no actual changes
- prepare for merging Xunlong config
* `linux-rockchip-rk3588-legacy`: `.config` Xunlong config, manually merged; preserved previous PR's
- preserved previous PR's changes:
- 1fdbab346a
- bf3b8a8fb7
- 7a3ad3afb2
- f1952f97f4
- ab70cb247f
- 62adba7825
- ba10622c32
- cd4da2a77b
- 7b3325c95e
- b4945d973c
- a8473e8143
* `linux-rockchip-rk3588-legacy`: `.config` re-updated to 5.10.110 after Xunlong changes
* OPi5: `rockchip-rk3588-legacy`: add patch to remove chosen > bootargs from `rk3588-linux.dtsi`
* Opi5: add build targets (by Igor)
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Igor <igor@armbian.com>
This fix impacts all boards that use extlinux.conf
I have tested the aml-s9xx-box build to ensure that this works as expected.
I think the only other boards that use extlinux.conf are those under
the media kernel
In testing I realized that I needed to add SRC_CMDLINE to the aml-s9xx-box
config file to get the correct append line added to the extlinux.conf file
Changes to be committed:
modified: config/boards/aml-s9xx-box.tvb
modified: config/sources/common.conf
There is no way to support this on s905 TV Boxes while reusing the
android u-boot as the android uboot on s905 conflicts with the partition
table location of standard mainline linux.
Changes to be committed:
modified: config/sources/families/meson-gxl.conf
deleted: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh
* `meson64-6.1` - rebased patches; 3 were mainlined
- JetHub device was mainlined
- ODROID's hack for pwm1_enable was re-done diffrently in mainline
* `meson64`: switch `current` to `6.0`, `edge` to `6.1-rc8`
