- vim1s/vim4: remove uEnv.txt and default extlinux args, use simple arguments instead
- meson-s4t7.conf: hack: rereadpt (re-read partition table) in initrd local-top (for eMMC boot of oowow'ed image)
- meson-s4t7.conf: include both `u-boot.bin.sd.bin.signed` and `u-boot.bin.signed` in uboot package
- meson-s4t7: patch kernel for different dt "model" across VIM4 and "New VIM4"
- meson-s4t7.conf: set `EXTLINUX_SPECIFIC_FDT=no`, so u-boot auto-determines which DTB to use
- don't specify DTB; this way both the "original VIM4" and the "new VIM4" can boot with the same image
- only "boot from SD" supported right now
- building uboot with xPack riscv-none-embed-gcc **external** toolchain setup in hooks
- kvim4: very high kernel logging + systemd debug logging to console
- kvim4/kvim1s: add uEnv.txt and ROOT_FS_LABEL="ROOTFS" and Khadas-esque extlinux
- meson-s4t7: unify khadas-vim1s and khadas-vim4 u-boot building
- kernel .config:
- s4t7: original Khadas vendor config
- s4t7: CONFIG_BINFMT_MISC=y
- s4t7: make NFS/sunrpc stuff =y
- s4t7: enable USB wifi drivers from Armbian network_drivers
- firmware: at https://github.com/armbian/firmware/pull/56
- extlinux tricks require https://github.com/armbian/build/pull/5462
- status:
- kvim1s: boots from SD and works as server/CLI
- kvim4: kernel panic during systemd-udevd
Move the BPI-M2PRO off the BPI-M5 U-Boot.
The BananaPi M5 supports the RTL8822CS Mezzanine, so let us
provide the proper bluetooth firmware.
NOTE: Boot needs verifying.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
- x13s: initialize bluetooth's public-addr, thus allowing BT to work
- linux-arm64-sc8280xp.config: enable per-core temperature sensors
- x13s: disable snapd.seeded service so boot won't hang if clock's < 2017
- x13s: back to steev's 6.3.y, since 6.4.y's audio drivers don't match alsa-ucm-conf
The default will align the data structures with the cluster size,
which causes the size to not be set to the full partition size. This
causes issues with some board ROMs. Use the -a flag to ignore the
alignment and fill the available space.
Co-authored-by: Igor <igor@armbian.com>
Linux 6.1 (current) / 6.4 (edge)
Add "current" to: config/boards/bananapim2pro.csc
Add uart_AO_B and uart_B to: meson-sm1-bananapi.dtsi
Add related pins to: meson-g12-common.dtsi
add wif/bt support to: meson-sm1-bananapi-m5.dts (BT = uart_A)
Add the ability to enable via overlays
NOTE: The overlay to enable the wifi on the BPI-M5 will be added
at a later date.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
