* Add WIP support for Orangepi Zero 2
* squeeze H616 patches into sunxi-dev
* Update linux-sunxi64-dev.config
* H616: Limit CPUMAX
* Enable DEV only
* H616: remove patches from sunxi-current
* H616: apply new patchset
Co-authored-by: EvilOlaf <werner@armbian.de>
Co-authored-by: Werner <EvilOlaf@users.noreply.github.com>
- move Odroid C4 from legacy u-boot toward mainline
- get rid of dirty legacy u-boot code
- get rid of FAT boot partition
- briefly tested
- both kernels can operate with one standard boot script
- add upstream patch and adjust config
- fix console
- don't clock C4 too high by default
- remove Debian stretch from image creations.
- if LOCAL_MIRROR is defined use just that, not armbian upstream packages
- move aptly web server from 8080 to 80
- adjust welcome motd
- remove Ubuntu Eoan from distribution selection menu
* Add Rockpi 4C
* Update config/boards/rockpi-4c.conf
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* Change backward compatibility link to B model
* Various changes - tested for building.
- add Radxa overlays
- update naming with mainline
- add Rockpi-E
* Reverting improvements for rockpi legacy and create a link to new DT only
* Copied ROCK Pi 4 device treesplitting patches to dev which was broken
* Add Rockpi 4c targets
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* Add initial Helios64 configuration
Add ethernet udev rules
Added disable auto power on script during shutdown
Configure ALSA to output audio to (DisplayPort) USB type-C
armbian-firstrun: exclude helios64 from generating fixed_mac
Each network interface on Helios64 already assigned to unique MAC
address in factory. Assigning Network Manager with cloned MAC is not
needed.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: rk3399: Add Helios64
Use rockchip propriettary loader
* kernel: rk3399-legacy: Update r8152 to support 2.5GbE USB RTL8156
Required for Helios64
* kernel: rk3399-legacy: update Rockchip PCIe driver
Port changes by ayufan on rockchip64.
* kernel: rk3399-legacy: Add support for Helios64
Add Helios64 device tree.
Enable missing driver/kernel module.
Auto load lm75 modules
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rk3399-legacy: rework roc-rk3399-pc patch
the patch broken due to additional line added by helios64 on
arch/arm64/boot/dts/rockchip/Makefile
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rk3399-legacy: update Rockchip PCIe driver
Backport bugfix from mainline
refer to
https://patchwork.kernel.org/patch/11561979/
and
https://patchwork.kernel.org/patch/11561977/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rockchip64-current: Add support for Helios64
Add Helios64 device tree.
Enable missing driver/kernel module.
* config: helios64: use mainline ATF on current branch
and u-boot TPL/SPL instead of Rockchip proprietary loader
* helios64: u-boot v2020.07 update
* Add Helios64 target
* kernel: rk3399-legacy: update Rockchip PCIe driver
Removed unrelated changes from porting ayufan fixes
Signed-off-by: Piotr Szczepanik <piter75@gmail.com>
* helios64: make use of PACKAGE_LIST* variables
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* WIP: Adding RockpiE config
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Mainline u-boot for ROCK Pi E
* Initial ROCK Pi E device tree in kernel
* Fixed supplies for ROCK Pi E device tree
* Adjusted u-boot load address for rockchip64 boards with 256MB eg. ROCK Pi E
* Blacklisted lima on ROCK Pi E
* Fixed ROCK Pi E patch after merge from master
* Removed mode settings from rk805 regulators
* Fixed issues with offloading for gigabit interface of RockPi E
* Adjusted ROCK Pi E board config
* Added dev branch for ROCK Pi E
* Add build targets
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Exchange legacy to current in ROCK Pi E build targets
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* Introducing Rockchip rk322x SoC support
Main features:
- Legacy kernel flavour based upon stable v2.x rk3288 Rockchip branch (https://github.com/rockchip-linux/kernel/tree/stable-4.4-rk3288-linux-v2.x)
- Current kernel flavour based on mainline 5.6.y kernel
- Mainline u-boot (v2020.04)
- Single generic tv box target (rk322x-box) which boots on all the known tv boxes
- Hardware devices (eMMC/NAND, led wiring configuration, SoC variant selection) modulation done by user at runtime via device tree overlays - a script (rk322x-config) is provided for autodetection and simple configuration by inexperienced users;
- Bits added to armbian-hardware-optimization to set affinity for irq handlers
- rk322x-box targets already added to targets.conf for automatic image creation
* Removed disabled patches
* Restored mysteriously removed comment character
* Improve all kernel building
Store hashes and rebuild only changed kernels. TBD: support for patch directory not fully implemented yet
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add support for patch directory checking
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Update lib/build-all-ng.sh
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
* Update lib/build-all-ng.sh
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
* Update lib/compilation.sh
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
* Update lib/compilation.sh
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
* Update build-all-ng.sh
* Disable u-boot hashing for now
* remove banana r2
breaks compilation ... no time for inspection ATM
* typo
* Change s5p6818 to COMMIT instead of TAG
TAG points to a different HASH and its not posible to resolve hash without cloning. This can be addressed later, but now commit HASH will do.
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bumping to new version
* Bumping to new version
* Bump
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* few changes
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Test
* Bumping to new version
* Bumping to new version
BOARD
Cubox i2eX/i4
* Bumping to new version
imx6 current
meson-gxl current
* Bumping to new version
linux-image-current-imx6_20.08.4-trunk_armhf.deb
linux-image-current-meson64_20.08.4-trunk_arm64.deb
* Bumping to new version
Adding following kernels:\n
* Bumping to new version
Adding following kernels:
linux-image-current-imx6_20.08.4-trunk_armhf.deb
linux-image-current-meson64_20.08.4-trunk_arm64.deb
* Bumping to new version
Adding following kernels:
linux-image-current-meson64_20.08.5-trunk_arm64.deb
linux-image-current-sunxi_20.08.5-trunk_armhf.deb
linux-image-legacy-meson_20.08.5-trunk_armhf.deb
linux-image-legacy-s5p6818_20.08.5-trunk_arm64.deb
* fix versioning
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bumping to new version
Adding following kernels:
linux-image-current-meson64_20.08.1_arm64.deb
* Put version back
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bumping to new version
Adding following kernels:
linux-image-current-imx6_20.08.0-trunk_armhf.deb
linux-image-current-meson64_20.08.0-trunk_arm64.deb
linux-image-current-mvebu_20.08.0-trunk_armhf.deb
linux-image-current-mvebu64_20.08.0-trunk_arm64.deb
linux-image-current-odroidxu4_20.08.0-trunk_armhf.deb
linux-image-current-rockchip_20.08.0-trunk_armhf.deb
linux-image-current-rockchip64_20.08.0-trunk_arm64.deb
linux-image-current-sunxi_20.08.0-trunk_armhf.deb
linux-image-dev-mvebu_20.08.0-trunk_armhf.deb
linux-image-dev-rockchip64_20.08.0-trunk_arm64.deb
linux-image-legacy-meson_20.08.0-trunk_armhf.deb
linux-image-legacy-meson64_20.08.0-trunk_arm64.deb
linux-image-legacy-mvebu_20.08.0-trunk_armhf.deb
linux-image-legacy-mvebu64_20.08.0-trunk_arm64.deb
linux-image-legacy-odroidxu4_20.08.0-trunk_armhf.deb
linux-image-legacy-rk3399_20.08.0-trunk_arm64.deb
linux-image-legacy-rockchip_20.08.0-trunk_armhf.deb
linux-image-legacy-rockchip64_20.08.0-trunk_arm64.deb
linux-image-legacy-rockpis_20.08.0-trunk_arm64.deb
linux-image-legacy-s5p6818_20.08.0-trunk_arm64.deb
* Bumping to new version
Adding following kernels:
* Bumping to new version
Adding following kernels:
linux-image-dev-rockchip_20.08.0-trunk.2_armhf.deb
* Bumping to new version
Adding following kernels:
* Bumping to new version
Adding following kernels:
* Bumping to new version
Adding following kernels:
* Bumping to new version
Adding following kernels:
* Report error code, adjust version
* Adjust ver
* Add another switch
Co-authored-by: Manuel Rüger <manuel@rueg.eu>
Co-authored-by: root <root@workstation>
* Switching Odroid C1 boot partition to FAT
U-boot FAT driver is very unstable and there is no wish to dig into u-boot. Seems like a sane workaround @plntyk
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add notes for separate boot partitions
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Typo
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bugfix: use zImage for converting to uImage since on FAT partitions we use move
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Cleanup C1 boot scripts
We have no plans to ever support legacy kernel again. Removing related things
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* A bit more radical change. Moving meson current to (new) legacy, current to 5.6.y and dev to some development branch / commit.
* Remove unneded patch
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* enable and change odroidc1 config
remove EOS
enable current and dev config
meson-current: update config
meson-dev: update config
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* meson-current meson-dev: reduce Kernel size
with default loading locations in u-boot
the uImage can be too large and will be partly overwritten
with the loaded dtb leading to boot failues due to wrong checksum
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* odroid-c1: change default loglevel
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* meson: fix odroidc1 boot and create uImage
without uImage the board will not boot
take the already used hack (?) from
general-kernel-odroidn2-current.patch
since KERNEL_IMAGE_TYPE does not work as expected
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* Update targets.conf
* Update targets.conf
* Update targets.conf
* Making a bigger diff
* Removing build_minimal
One can choose what to build, while build targets are defined elsewhere
* Governor interactive n/a
* Updating config
Cause of changes in boot.ini we don't need to worry about size. After few tests, no problems sighted.
Tested running Docker.
* Adjust dev config too
Tested.
* Update odroidc1.conf
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* meson-sm1: use amlogic-boot-fip to generate boot binary for SM1
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* patch: add Linux and U-Boot patches
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* configs: enable Odroid-C4
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
