* Fix variable $root_partition_device to be a device path
- variable $root_partition_device is intended to be a
device path as /dev/$root_partition_device_name
* Fix determination and usage of variable $sduuid
- a) lookup mmc devices excluding the mmc device probably providing
the current root partition
- b) if there is no sduuid determined by this lookup,
then lookup any mmc partition matching /dev/mmcblk*p1
- c) move the sduuid calculation to the script header
to enable usage for scenario selection filtering
- d) hide installation scenario #1 selection,
if $sduuid is empty, since $sduuid is essential for that scenario
* Hide current root partition device from destination selection
- add new variable $root_partition_name
- use this variable to filter current root partition
from destination selection in check_partitions()
* Fix behavior in case of no available partition
- The logic in check_partitions() in case of no available
partition is improved not to fail for a hidden reason
and UX for fresh disk devices is improved
- Fix the calculation of $FREE_SPACE for devices without or
with an empty partition table
- Ask the user to proceed AFTER the minimum free capacity
required is verified
- Improve the logic for auto-creating initial partitions
as follows:
1. Check for a minimum free space of 4GB for a partition
2. Ask user to proceed with auto-created partition(s) or not
3. Distinguish between UEFI and non UEFI device
4. Create a partition of full free size for non UEFI devices also
* Add support for MTD char driven flash
- replace $spicheck by $mtdcheck
- add probable MTD char device partitions to $mtdcheck
- update comments and dialog content:
- replace "SPI Flash" by "MTD Flash"
- replace call of "create_armbian 'spi' ..." by "create_armbian 'mtd' ..."
- update description for /dev/nand1 /dev/nand2 as "legacy SUNXI NAND"
- additional parameters passed to import function "write_uboot_platform_mtd":
$3 - Log file name
$4 - SPACE separated list of all MTD device partition(s)
* Moving repository handling from main script
- cleaning
- working
TBD: handling of parameters
* Not needed anymore
* Paramter handling, edit config in mktemp
* Typo
* Improve string handling
* Cleanining
* Compacting
* Change to backslash compatible sed replacement
* Publish all, update selected to avoid having erros at update
* Add support for html index generation
* Bugfix
* More arch
* Don't run publish if there is nothing in the incoming
* Add repo sync control file creation
* Fix hardcoded value
* moved rockpro64 patch out of rockpis patch sequence
It had been misnamed
* patch new mainline devtree for Rock Pi-S instead of overwritting it.
Also restores lost bluetooth compatibility items on UART4
- function check_partitions():
- remove file system filter on lsblk commands
for listing probable target partitions
- fix typo "Destnation" -> "Destination"
- fix indentation on if scopes
fixes#4576
There is no way to support this on s905 TV Boxes while reusing the
android u-boot as the android uboot on s905 conflicts with the partition
table location of standard mainline linux.
Changes to be committed:
modified: config/sources/families/meson-gxl.conf
deleted: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh
* Rename add-board-roc-pc.patch to add-board-rk3328-roc-pc.patch
there are a large number of "roc-pc" boards as firefly has adopted/misapplied the Libre Computer naming convention. Be as specific as possible.
ALSO NOTE A DTS EXISTS IN MAINLINE.
This patch is overwriting the mainline DTS entirely, and should be replaced with patches changing the mainline instead to avoid further deviation from the base.
* Rename add-board-roc-pc.patch to add-board-rk3328-roc-pc.patch
Specify which roc-pc it is
This patch doesn't make any changes to the source file:
- rockchip->ep_gpio = devm_gpiod_get_optional(dev, "ep",
- GPIOD_OUT_HIGH);
+ rockchip->ep_gpio = devm_gpiod_get_optional(dev, "ep", GPIOD_OUT_HIGH);
- this patch had "half-mbox" formatting
- first a bare patch (no mbox headers, From/Subject etc)
- then an mbox-formatted patch
- this causes the 1st/bare patch to be lost when parsing this file with a proper mbox-enabled tool
* Disable kernel bootsplash. We don't use it anymore and its time to go rest
* Switch to more recent commits
* Fix remaining drivers and fix shellcheck errors
* armbian-audio-config: Massively speed up script
This script calls amixer to set various mixer volumes, by simply trying
a bunch of mixer names for each sound card in the system. In practice,
this meant the amixer command was called 158 times for each sound card.
The overhead of all these forks and probably also amixer startup added
together to produce a noticable slowdown in startup.
For example on an Orange Pi PC, the script took about 6 seconds per
soundcard. This was on a system with a few extra USB soundcards (6 alsa
cards in total):
$ time bash ./armbian-audio-config.original
real 0m35.662s
user 0m20.145s
sys 0m15.145s
This commit modifies the script to spawn amixer only once per alsa card,
passing all the mixer set commands through stdin. This pretty much
completely kills the slowdown. On the same 6-card system:
$ time bash ./armbian-audio-config
real 0m0.406s
user 0m0.345s
sys 0m0.229s
* armbian-audio-config: Add quotes to fix lint errors
* `meson64-6.1` - rebased patches; 3 were mainlined
- JetHub device was mainlined
- ODROID's hack for pwm1_enable was re-done diffrently in mainline
* `meson64`: switch `current` to `6.0`, `edge` to `6.1-rc8`
