* Add megous files for 5.16, tag orange-pi-5.16-20220216-2000
* Optimize the selection of a set of patches
* Remove unused patches
* Fix the state on the version tag=v5.16.11
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Rockchip64 Linux-5.10y - drivers for Motorcomm YT8531
renamed the previous "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" to "net-phy-Add-driver-for-Motorcomm-1-YT85xx-PHYs.patch" to fix patch order and added a new patch "net-phy-Add-driver-for-Motorcomm-2-YT8531-PHYs.patch"
The new YT8531 patch is sourced from from Lean's OpenWrt source rockchip/patches-5.10/601-net-phy-Add-driver-for-Motorcomm-YT8531-PHYs.patch.
It is intended to extend a patch identical to Armbian's "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" and is used without alteration.
* Add new board OrangePi R1 LTS (rk3328)
Includes uBoot and support for Linux-5.10y
* Rockchip64 Linux-5.15y drivers for YT8531 and other Motorcomm chips
YT8010, YT8510, YT8511, YT8512, YT8521. The driver patch set is sourced from Xunlong-OrangePi OpenWRT and is used as is, with only a name and makefile change.
A single patch set uses the same underlying source code as the Armbian Linux-5.10y set, but uses inbuilt logic to apply tweaks that depend on the Linux kernel version.
The patch is renamed similarly to the 5.10 patch set, net-phy-Add-driver-for-Motorcomm-T85xx+PHYs.patch to imply code base continuity with the previous similar Armbian patch sets.
* Rockchip64 Linux-5.15y support for Orange Pi R1 Plus LTS
Includes DTS and makefile changes. A driver for net phy YT8531C is in a separate commit
* change orangepi-r1plus-lts.csc to orangepi-r1plus-lts.conf
board is now supported
* - add patch also to 5.16.y
- fix wrong patch permission
* Fix Makefile patch
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Switched rockchip64-current to linux 5.15
* Backported and adjusted patches from rockchip64-current
* Switched rockchip64 edge to 5.16.y (#3499)
* Initial rockchip64-edge at 5.16.y
* Bunch of fixes for rockchip64-edge at 5.16.y
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Radxa Zero 2 is a small form factor SBC based on the Amlogic A311D
chipset that ships in a number of eMMC configurations:
- Amlogic A311D (Quad A73 + Dual A53) CPU
- 4GB LPDDR4 RAM
- 32/64/128GB eMMC
- Mali G52-MP4 GPU
- HDMI 2.1 output (micro)
- BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
- 1x USB 2.0 port - Type C (OTG)
- 1x USB 3.0 port - Type C (Host)
- 1x micro SD Card slot
- 40 Pin GPIO header
Signed-off-by: Yuntian Zhang <yt@radxa.com>
* Detach Jammy from focal due to package changes
Fix font package name
* Resolve broken packages for Jammy / i3 / gnome / xmonad
printer-gnome is also obsolete
* Bump rootfs cache number
* Revert "rpi: copy DTBs to Debian/Ubuntu standard location /lib/firmware/$version/device-tree; remove build-time-only hacks (#3462)"
This reverts commit 2f2d10c04a.
* Revert "Fix rpi upgrades to kernel and dtbs (#3461)"
This reverts commit 3b7f5b1f34.
Copying dtb files to a folder that cannot belong to a dtb package
creates additional clutter. If this is required for an individual
family, then it is necessary to implement it at the level of system
scripts. And only for this family.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Rename "git" to "improved_git" if the command accesses a remote server
* Rename by meaning
* fetch_from_repo: Remove dependency for related functions.
* waiter_local_git: Add an option for the whole family
if present in the configuration
* Correct the comment
* Fix rename git to improved_git
* Prepare xu4 edge for 5.16.y, move current of imx6 to 5.15.y and edge to 5.16.y
- fix bootsplash on 5.16.y
* rk322x: advance current to 5.15 and edge to 5.16
* rockchip: advance current kernel to 5.15, edge to 5.16
* - adjust configs
- fix bootsplash patches
- adjust aufs
* Switch sunxi / sunxi64 current to 5.15.y, edge to 5.16.y
- cleanup bootsplash patches
- adjust configs
* Update mvebu64
Co-authored-by: Paolo Sabatino <paolo.sabatino@gmail.com>
* rpi: fix: flash-kernel fix to ignore kernel 'flavour' for all raspi's
- use uppercase RPICFG label, so it shows up on Windows/Mac (FAT requires uppercase)
* builddeb: fix indenting of heredocs and shellfmt
* rpi: add DTB symlink in Debian/Ubuntu standard location /lib/firmware/$version/device-tree; remove build-time-only hacks
- this allows us to remove the most horrible hack
- should allow for correctly working DTB upgrades
- should NOT impact other families, although a new symlink will be created, nothing uses it.
* Support edge kernel for Rock 3A and rk35xx
* Removing patch email headers
There is also some script floating around to do this automatically when pooling from patchwork
* Update rk356x-usb2-support.patch
* Remove email headers
* Remove email headers
* Remove email headers
* Update config and change edge branch
* Enable edge beta build
* Refresh the rk35xx patches and update the dts
Remove also previous wireless patches related to IPX removal
* Removing hirsute target
deprecated
Co-authored-by: Catalin Toda <catalinii@yahoo.com>
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
