* set clocks to the old default rate if the codec never calls set_sysclk
After mainline kernel commit 21cfbeae7d7c54a6cdea4b00096150f438f4fbde
rockchip i2s requires that soc codecs call set_sysclk to explicity select a rate.
This patch simply reverts to the old behavior if the codec does call set_sysclk.
(rather that failing in that case with a bogus rate of 0hz)
Also adds rk3308 vendor ASoC support to 6.16 kernel
* Require use of device tree overlay to enable pcm5102a CODEC
fan53555 driver doesn't accept "tcs,tcs452x" as a compatible, it should
be "tcs,tcs4525" instead.
This change fixes CPUFREQ on CB2 on 6.12
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
* Create rk3588-orangepi-5-ultra.dts
* Create orangepi5-ultra.csc
* fixups
* add notes
* fix u-boot compilation
* Update to v7 patch series
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20250222193332.1761-1-honyuenkwun@gmail.com/
* Update rk3588-orangepi-5-ultra.dts
While I don't fully understand either the `kernel-dtb` command nor the dt syntax itself for some reason the `nophandles` version stripped more than actually phandles. Lets see what happens this way.
* Delete patch/kernel/integrate-6.15/0001-tools-Makefile-remove-pci-target.patch
* disable OPTEE
c81f89ca90
* rock-3a - fix formatting of gpio-line-names
properly format gpio-line-names, following the example from Trevor Woerner for his contribution to the radxa-zero-3 dt.
Also fix a wrong pin number
* fix applying
The extcon-usbc-virtual-pd driver requests the detection GPIO with the flag GPIOD_OUT_LOW, which leads to a failure in gpiod_to_irq and consequently causes the driver loading to fail.
This issue can be fixed by changing GPIOD_OUT_LOW to either GPIOD_IN or GPIOD_ASIS.
This patch opts to change GPIOD_OUT_LOW to GPIOD_ASIS, as this is a less invasive approach. For devices intending to use this driver, it's also necessary to set the pinctrl property of the detection GPIO to input mode in the dts file.
