* patch: misc: rtw88: wireless-next: 2023-08-25
Updated: 6.1 / 6.4
Added: 6.5
For doc sake, this update makes 6.1 slightly differrent than 6.4 and
6.5 in one particular area of main.c.
As shown here:
7746e2fa87
6.1 requires we use del_timer_sync, where the above releases use
timer_delete_sync.
Tested-on: ODROID-C4 X96-AIR BPI-CM4 (linux 6.x.y)
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
* driver_rtw88: `linux-version compare "${version}" ge 6.1`
Suggested-by: @viraniac
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
- bsp-cli: `postinst` is now generated _after_ the hooks are run
- hooks are allowed to append to `postinst_functions` array
- hooks are _not_ allowed to modify `DEBIAN/postinst` directly anymore (it won't even be there)
- rewrite the postinst stuff in `helios4`'s `family_tweaks_bsp()` to use new way
- introduce `add_file_from_stdin_to_bsp_destination()`, a helper for easy heredoc-based adding of files to bsp-cli
- First and only argument is the destination path, relative to the root of the package -- do NOT include $destination -- it is already included.
- Containing directory, if any, is created automatically (no more "mkdir -p x; cp y x/z")
- The full path (including $destination) is set in $file_added_to_bsp_destination, declare in outer scope to get it if needed.
- deprecated in `bullseye`: _This package is for legacy applications and no longer used by GNOME._
- https://packages.debian.org/bullseye/gconf2
- removed in `trixie` and `sid`
- `bullseye` is the father of all symlinks, so yeah, call me lazy
- we should probably refactor this into a shared library's functions...
- `flashcp --partition` is much more efficient than just `dd`'ing to mtdblockX
- but only supported on bookworm+ / jammy+
- split errors and warnings into multiple lines, so a bit easier to see in the logs what the real error was
- also turn down a few spurious warnings to debugs
- digs into config/distributions and config/desktops for info
- this produces `output/info/all_userspace_inventory.json`
- this is now passed down to the `targets-compositor` in `cli-jsoninfo`
- `targets-compositor` now accepts `userspace:` as `items-from-inventory`
- extra: add `targets-composed` CLI command, to stop after targets-compositor
- the interactive menus didn't allow interactive users to select invalid combinations...
- ... but if specified directly on cmdline, no checks were done at all.
- introduce `exit_with_target_not_supported_error()`, which is just `exit_with_error` (code 43) but with code 44
- this way the targets pipeline can just warn instead of break;
- sometimes it's easier multiplying matrixes and skipping the few that can't be built
After we bumped u-boot to version v2022.10, a couple of boards
stopped booting because the CONFIG_SPL_STACK value used in our
u-boot config was too low for that SOC. This change drops explicit
CONFIG_SPL_STACK defination from the affected boards.
The boards confirmed to have the issues were Orange Pi 3 LTS and
NanoPi Neo Black2 but I suspect that NanoPi K1 plus is also affected
hence similar change is done for that as well
* dts: amlogic: meson-g12b-bananapi-cm4: switch to enable-gpios
The recommended name for enable GPIOs property in regulator-gpio is
enable-gpios. This is also required by bindings:
meson-g12b-bananapi-cm4-cm4io.dtb: regulator-vddio-c: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
* board-bananapi-cm4-switch-to-enable-gpios: `text formatting correction`
Apparently the builder did care for the original.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
- using Kwiboo's `rk3568-2023.10` branch with BINMAN-handled blobs
- patches (defconfig unless indicated):
- boot usb first (rockchip-common)
- blink leds & keep red one one on preboot; reset SPI env once after deinfesting from Petitboot
- change usb_host0_xhci to otg (u-boot dtsi)
- enable DM_GADGET, UMS 🔥 and RockUSB
- **usage instructions**:
- build & burn image to SD card
- insert SD card into board
- **hold the recovery (RCY) button** and power on the board
- watch board boot
- **de-infest Petitboot**: use `armbian-install` to install bootloader to MTD
- if you don't, you'll need to hold the recovery button every boot
- optionally: use `armbian-install` to install OS to eMMC/NVMe/USB
- power-off board
- remove SD card (new u-boot always boots SD first!)
- boot into your newly de-infested machine
- boot order: USB, SD, MMC, NVME, SCSI
- de-infested machine can now boot (directly) from USB/SATA/NVMe, possibly via EFI:
- Armbian UEFI-arm64
- Fedora 38 aarch64
- HASSOS for ODROID-M1
- Talos arm64
- others...
- extra: new u-boot by Kwiboo (with GMAC patches) gives us stable MAC address
- although it is based on cpuid#, doesn't match the HK sticker on the board
- run `fw_setenv ethaddr XX:XX:XX:XX:XX:XX` to change eth addr in SPI flash environment if needed
- `odroidm1`: update DDR/BL31 blobs (this depends on https://github.com/armbian/rkbin/pull/20)
- current (6.1) does not yet carry the DTB
- u-boot (up to at least 2023.10-rc2) does NOT have ADC detection for N2L, so force the DTB
- `meson-g12b.conf`: add a specific if for `odroidn2l` _before_ the `odroidn2*` for FIP blobs
