* introduce DEB_COMPRESS for dpkg-deb+kernel's KDEB_COMPRESS
- Avoids zstd which is now default in Ubuntu Impish, but can't be read by Debian dpkg
- Allows for xz, gzip, or none; defaults to xz; use gzip for faster, and none for much faster.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* use KDEB_COMPRESS in packages/armbian/builddep for 5.12+ kernels too
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* add workaround against default MAC Address (userland utility bdaddr does not work to set MAC Address as expected)
* enable bits for xt-q8l-v10 board (ap6330/bcm4330 part), switching AP6330 bluetooth to btbcm driver using serdev
facilities to avoid userspace machinery with deprecated hciattach tool, added bits to enable driver support in kernel.
Removed ap6330 bluetooth service from bsp packages, added initramfs-tools hook to include bcm4330b1.hcd firmware in initramfs
* DEBUG code
* make M=scripts clean before creating the package
Move the cleanup of the scripts target from the postinst script
to the logically correct place so that the cleanup occurs with
the same arguments of the make command and the same compiler.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* clear all files in target directory
* Debugging for version 5.10.10 and higher
* Return to version 5.12
Since version 5.12, there are no collisions
with deleting the scripts/module.lds file.
This pathology begins with 5.10 and ends on 5.11 inclusive,
and this is due to internal migration in the core.
* Change the order of creating packages
The linux-headers package must be built in the last queue
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Revert "DEBUG code"
This reverts commit 6bd8dcaa3b.
* revert xcfe to old look
* fix login screen xfce old look
* Re-add monitorVirtual-1
* There is not such icon
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
- via Jeremiah Cornelius on the Armbian Forums
- also clarify comment about 2 dtbs in mainline kernel
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* add DFI driver to provide hardware-based memory controller load
* adapted DRAM Memory Controller driver from rk3328, add necessary headers
* provide device tree overlays to enable DDR3 clock scaling
* adapted rk322x-box to allow DDR speed bin selection to user
* add ipb900 board gpio configuration
* add rtl8723cs driver to linux-current kernel
* use ddrbin v1.10 set to 330 Mhz at boot
* provide overlays for ddr3 at 330, 528, 660 and 800 mhz
* split emmc overlays to enable options by user choice
* modified rk322x-config to support dmc, emmc overlays
* remove optee trust os in favor of rockchip proprietary blob
for dmc functionality
* Improvements for BSP creation
- add support for the same principle found in desktop creation. For CLI package we are copying content from "bsp-cli" folders.
- moving bsp* copy function to image-helpers
- improve readme
* Add support for desktop board support package
Extracting from https://github.com/armbian/build/pull/2776 which can be closed after.
* Desktop BSP creation is working, but need broader testing and some quick how-to
* Create empty files as examples where we can put things.
* Fixing Pinebook desktop bsp creation
* We need to have information about ARCH in the desktop bsp package. This ain't universal.
* cleanup add vim3l
* Add Khadas edge config
* Add Khadas edge sources definitions. It boots
* Change configuration to maximised model
* Adjust build configs
* witch to case statement for meson x11 config
* push vim1 naming
* Booting VIM2 with khadas prebuild u-boot
Can load from an empty eMMC, can be installed to eMMC via nand-sata-install
* Add Vim1 and move 1 and 2 to supported. VIM1 is not tested yet.
* Enable full featured desktop with 3D for khadas vim 1 and vim2
* Update meson64_common.inc
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* fixing my bad patch from lastnight.
Removing the bad patch I did last night and fixing it with proper sed commands
* fixing names .
had to fix names in the files
* configuring new settings in slick-greeter
* kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
Since commit 269a535ca931 ("modpost: generate vmlinux.symvers and
reuse it for the second modpost"), with CONFIG_MODULES disabled,
"make deb-pkg" (or "make bindeb-pkg") fails with:
find: ‘Module.symvers’: No such file or directory
If CONFIG_MODULES is disabled, it doesn't really make sense to build
the linux-headers package.
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Wed Oct 14 03:38:19 2020 +0900
Upstream commit bac977cbc0d6731fb8e67c2be0e4acbd959e10b3
Fixes: 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost")
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* mkdebian: fix: build a package for version 5.13
upstream commit 82526ef43399a7556b860538041802042b3872c1
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Tue Apr 20 02:05:05 2021 +0900
kbuild: deb-pkg: change the source package name to linux-upstream
Change the source package name from 'linux-$(KERNELRELEASE)' to
'linux-upstream'.
Initially, I tried to use 'linux' to be aligned with the Debian
kernel package, but Ben suggested 'linux-upstream' so that it is
clearly distinguished from distribution packages. [1]
The filenames will be changed as follows:
[Before]
linux-5.12.0-rc3+_5.12.0-rc3+-1.dsc
linux-5.12.0-rc3+_5.12.0-rc3+.orig.tar.gz
linux-5.12.0-rc3+_5.12.0-rc3+-1.diff.gz
[After]
linux-upstream_5.12.0-rc3+-1.dsc
linux-upstream_5.12.0-rc3+.orig.tar.gz
linux-upstream_5.12.0-rc3+-1.diff.gz
Commit 3716001bcb7f ("deb-pkg: add source package") introduced
KDEB_SOURCENAME. If you are unhappy with the default name, you can
override it via KDEB_SOURCENAME.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Search by template when updating initramfs
Search by pattern first, then use in the command.
If unsuccessful then exit by mistake.
Fix:
depmod: WARNING:
could not open modules.order at /var/tmp/mkinitramfs_bp3vP5/lib/modules/5.13.0-sunxi64:
No such file or directory
could not open modules.builtin at /var/tmp/mkinitramfs_bp3vP5/lib/modules/5.13.0-sunxi64:
No such file or directory
When a valid directory lib/modules/5.13.0-rc6-sunxi64
Or when the user added a localversion to the configuration file
and valid directory lib/modules/5.13.0-rt7-sunxi64
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Code Cleanup: kernel build: Removing EXTRAVERSION Cleanup
This was intended for the EDGE kernel and is no longer required.
Moreover, this code is not working.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
Add two bash arrays, XTRA_RSYNC_{FROM,TO}, defined in
/etc/default/armbian-ramlog, and expand these in the two rsync
invocations in /usr/lib/armbian/armbian-ramlog.
The use of bash arrays simplifies the use of multiple arguments and also
allows for in-band commentary between array elements.
When expanding, safely test for these arrays to exist. This is, sadly,
a little verbose in bash, so, while here, split the rsync invocations to
use line continuations.
Fixes https://github.com/armbian/build/issues/2846
- When trying to delete by using "backspace", it will also print a "*"
and also appended to password
- When pressing keys too fast, it is possible that some characters
actually printed on the screen
Compiling the kernel headers repeatedly and in a single thread
increased the overall package build time by several times.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
- users are "confused" about manipulating files in their home directories
- introduced security issues which have been worked around but there might be others too
- more recent htop may support network stuff oob (https://armbian.atlassian.net/browse/AR-771?focusedCommentId=10546)
* Rework make linux headers
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Make linux-source first and clear the memory
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
Not touching logic or the (IMO ridiculous) behavior of this script. Just meant as a quick&dirty workaround for the specific sed/symlink attack vector. Check https://github.com/stealth/7350topless for details.
* New build kernel if version ge 5.12
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Rename packagename for kernel in the armbian style
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Fix depends pkg for build linux-*
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Fixed version search by Source field
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Fix postinst, prerm scripts for headers pkg
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* VENDOR, rock-pi-n10, RM_LIST for armbian-config/zsh
VENDOR parameter in configuration
zsh is the best of course...
Static MAC for networkd
ROCK Pi N10 (Radxa) - Initial support, knwon bugs:
- Problem with poweroff (kernel panic).
- DeviceTree is not fully verified, I suspect missing and unnecessary
entries.
- No support for NPU
- u-boot without NVME support
- I have doubts if I chose the right preboot loader for RK3399Pro, NPU
and installed DDR memory.
* New RK3399Pro boot preloaders.
* rootfs checksum, DEBOOTSTRAP_LIST fix, output.log fix
Repaired checksum for rootfs
Added use PACKAGE_LIST_RM to purge DEBOOTSTRAP_LIST
Better logging to output.log
Fix for new host distribution detection (ie Debian Bullseye).
ubootdebs as new cleaning option
* Update 30-armbian-sysinfo
Fixed alignment of "Local users" and "IP" in third column.
Made it more compact by adding extra new line.
Added "both" traffic direction.
Removed "-h" vnstat argument because it doesn't do anything, changed "last 24h" to "today" (there is only "rx/tx for today" in --oneline output).
* Update armbian-motd.dpkg-dist
Add PRIMARY_DIRECTION description
* Update 30-armbian-sysinfo
fix new line logic
clean-up unused variables
* Re-enable network checksum TX offload on rockchip64 family
* Adjust gmac PBL setting for rk3399 legacy to fix network issues with MTU 1500
* Adjust gmac PBL setting for rk3328 in rockchip64-legacy to fix network issues with MTU 1500
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* add Jetson Nano
* Update jetson-nano.conf
* Update targets.conf
* Add better description
* Adjust config - try to enable ZRAM
* Packaging patch not needed
* Extlinux was solved in other commit
* Move board to CSC for now
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Currently armbianmonitor -n does not detect vlan interfaces correctly.
This is because of an incorrect egrep -o which filters out the parent interface name:
network interface: 100
instead of
network interface: eth0.100
Cascading into:
armbianmonitor: line 1095: eth0. - 0 : syntax error: invalid arithmetic operator (error token is ". - 0 ")
Fixed by changing the egrep logic to filter out the last field of route -n output.
Also fixes a timer issue by moving the timer start to after the interface selection.
time controller adjustment: -2.43
/usr/bin/armbianmonitor: line 1128: read: -2.43: invalid timeout specification
* At first login we set users locales based on his location which seems to be to agressive
Add a question before setting it should suffice. Closing https://github.com/armbian/build/issues/2398
* Read it silently
* Detect locales selection only if we choose to add normal user
* Asking for shell right after seting root password
* Move selections inside traps
* Remove duplicated call
* Add support for configuring CPU temperature offset
Some boards, such as the Orange Pi Zero LTS, report shifted CPU temperatures.
For more details, see https://forum.armbian.com/topic/11534-orange-pi-zero-lts-incorrect-temps-reported/
* Update armbian-motd.dpkg-dist
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Added 2 configuration parameters to armbian-zram-config.
First paramter (SWAP=) can explicitely disable zram swap (while leaving log and tmp untouched).
Second parameter (TMP_SIZE) can be used to explicitely set tmp ramdisk size.
The behaviour of existing configurations is not changed.
New function activate_zram() to initialize zram devices and parameters.
Changed script to use zramctl to more flexibly establish zram devices to use for log and tmp.
This also fixes issues which result from both armbian-zram-config and armbian-ramlog being hardcoded to use zram0
* Add support for ZSH / TMUX / oh-my-zsh
* Selecting default shell at 1st run
* Install ZSH by default except on minimal image
* Lets rather create armbian-zsh package
* - fix remaining ZSH problems
- add systemd timer to remove default desktop autologin feature
- change DESKTOP_AUTOLOGIN to disabled by default
* Few small improvements
* Oneliner for revering all users back to BASH if package is uninstalled
* Properly escape variables
* Fixing chmod
* More cryptic awk magic to fix permissions for all normal users that are getting zsh magic
* Move default values where they should be and fix for updates not showing up
* Add support for vnstat and ZFS
* Cosmetical
* Put defaults back
* Update data displaying
* Add support for displaying "reboot required" when regular packages like e.g. dbus requires a reboot
* Add dependency problem check
* Also add storage to user defaults
* sunxi: kernel: current/dev: enable sun6i-csi and disable LL debug on UART0
The former is useful on some boards, e.g. PineCube.
The latter blocks boards that do not utilize UART0 from booting.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: add new family sun8i-v3s
This family is intended for boards with V3/V3s/S3/S3L chips and low
DRAM capacity.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: add PineCube board
This board features Sochip S3 SoC (Allwinner V3 die + co-packaged 128MiB
DRAM), and an OmniVision OV5640 camera is shipped with the board.
Add support for it. It could be used as an IP camera then.
Kernel support is only added to current/dev branch, with dev just using
mainline-merged DT and current using backported DT from 5.10-rc.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: kernel: current/dev: add V3s OHCI/EHCI nodes
These are needed for USB host on V3s boards to work.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* update fancontrol configuration
* Enable network activity led, default to eth0
* Do not disable auto poweron on power loss event
* Added UPS timer
Provide timer to poweroff system after 600 s (10 minutes) of power loss
event. If power restored within that time window, cancel the timer.
* Use different service for legacy
LK 4.4 does not have ledtrig-netdev, so it will cause the service to
fail.
* Use 10m instead 600 seconds in UPS timer
Systemd time can use m suffix for minutes. Use this to make it easier to
read.
Right now, you simply cannot choose between different DE's installed on the system. The session indicator uses very little space, and doesn't clutter the greeter.
I noticed it was missing when trying to integrate a Kodi session. It will be useful in the future also, when we incorporate more DE's than Xfce
* armbian-hardware-optimization: delay applying eth0 tweak on rk3399
* armbian-hardware-optimization: delay applying eth0 tweak on rockchip64
* armbian-hardware-optimization: fixed irq smp affinity for usb
on rockchip64.
Similar like the one applied to rk3399 on commit [eaf6853]
* Change Ubuntu Eoan to Ubuntu Groovy and enable it as CSC
Tested CLI and desktop image, but needs cache creation and repository before it will be possible to build without error.
* Update Groovy compiler for chroot
* Adjust pkg dependencies for groovy
Sadly htop doesn't build
Pinebook-Pro Support:
suspend to idle via key and lid close
brightness keys
volume control keys
wifi, bluetooth frimware
touchpad tweaks
keyboard config
armbian-hardware-optimization
bootsplash
Co-authored-by: Britt Dodd <britt@reactornet.net>
- Chanaged default x.org configuration to disable glamor
- Reintroduce patch to use DRM cursor plane as overlay in rk322x-current and -dev
- Updated wifi patches for kernel 5.8.10
- Bumped rk322x to u-boot v2020.07, removed reserved zones from device trees
- Updated OPTEE to v3.10, using ddrbin v1.10
- Bumped rk322x-current to kernel 5.8.y
- Imported new patches from knaerzche's LibreELEC fork for rk322x-dev (kernel 5.8.y)
- Adjusted existing patches to match changes, updated rk322x-dev kernel config file
- Add default modprobe conf file for esp8089 to force the crystal frequency to 40Mhz for rk322x targets
- Removed ssv6051 firmware packages to move to armbian-firmware repository
- Switching ssv6051-wifi.cfg to /lib/firmware for rk322x-legacy
- Removed P2P interface for esp8089 driver for rk322x-legacy
- Optimized ssv6051 performance: kernel module gains -Os flag, disabled p2p interface, enabled HW crypto for CCMP cipher
- Enabled remote control interface, IR GPIO kernel module and HDMI CEC modules
* Supress systemd service warning
* helios64: u-boot: staggered HDD power up
Set the delay to 10s in between turning on the next HDD power rails.
Remove the delay property from kernel device tree, let it only apply to
u-boot
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios64: fault LED as kernel panic indicator
also sync, u-boot dts
* helios64: fix hwmon udev rules
Legacy kernel (LK 4.4) has different class/naming on SoC Temp sensor.
Also fix typo on current/dev udev rules.
* Improve HTOP with scripted updating based on network up/down
Also enable / disable GPU temperature - where available.
* Update Htop default configuration
* Workaround for kernel bug
Until we don't find a solution to this problem, disabling partition checking and it will not bother to resize resized fs again. Most likely the bug is related to the ext4 filesystem changes in the upstream 5.8.y kernel.
* bsp: helios64: Add fancontrol
- Fancontrol configuration
- Udev rules for fan and temp sensor
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* bsp: helios64: Enable heartbeat on system status led
The reason systemd service used instead of device tree modification, is
to give visual notification that the system is ready.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* armbian-hardware-optimization: SATA & 2.5GbE IRQ pinning on Helios64
- 2.5GbE USB LAN which is attached to XHCI, assigned to CPU4
- SATA controller assigned to CPU4 and CPU5
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
Tested once again on N2/N2+
Note: disabled mesond_vdec module in kernel config since it crashes complete video system when loaded. Need to be added back once stable - or perhaps we need to adjust some parameters?
- remove Debian stretch from image creations.
- if LOCAL_MIRROR is defined use just that, not armbian upstream packages
- move aptly web server from 8080 to 80
- adjust welcome motd
- remove Ubuntu Eoan from distribution selection menu
Adapted rk322x-dev to kernel 5.8.y
Added ssv6x5x driver to legacy kernel, rk322x-config now allows the user to select which driver load at boot
Added esp8089 kernel module, device tree overlay and detection in rk322x-config script
Fixed some indentation
Added reset button binding
Added sdcard debounce
Fixes indentation, added device tree overlay for high-leakage cpus
Added support for bluetooth device tree overlay and realtek systemd service for rk322x targets
Fixed a bug in armbian-check-first-login-reboot.sh which caused a
newline character to be prepended to the shell prompt even when a reboot
required warning was not shown to the user.
* Add initial Helios64 configuration
Add ethernet udev rules
Added disable auto power on script during shutdown
Configure ALSA to output audio to (DisplayPort) USB type-C
armbian-firstrun: exclude helios64 from generating fixed_mac
Each network interface on Helios64 already assigned to unique MAC
address in factory. Assigning Network Manager with cloned MAC is not
needed.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: rk3399: Add Helios64
Use rockchip propriettary loader
* kernel: rk3399-legacy: Update r8152 to support 2.5GbE USB RTL8156
Required for Helios64
* kernel: rk3399-legacy: update Rockchip PCIe driver
Port changes by ayufan on rockchip64.
* kernel: rk3399-legacy: Add support for Helios64
Add Helios64 device tree.
Enable missing driver/kernel module.
Auto load lm75 modules
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rk3399-legacy: rework roc-rk3399-pc patch
the patch broken due to additional line added by helios64 on
arch/arm64/boot/dts/rockchip/Makefile
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rk3399-legacy: update Rockchip PCIe driver
Backport bugfix from mainline
refer to
https://patchwork.kernel.org/patch/11561979/
and
https://patchwork.kernel.org/patch/11561977/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rockchip64-current: Add support for Helios64
Add Helios64 device tree.
Enable missing driver/kernel module.
* config: helios64: use mainline ATF on current branch
and u-boot TPL/SPL instead of Rockchip proprietary loader
* helios64: u-boot v2020.07 update
* Add Helios64 target
* kernel: rk3399-legacy: update Rockchip PCIe driver
Removed unrelated changes from porting ayufan fixes
Signed-off-by: Piotr Szczepanik <piter75@gmail.com>
* helios64: make use of PACKAGE_LIST* variables
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* Add initial support for Odroid N2+
* Update C4 config and test booting
* Updates to C4, N2, N2+
- merge C4 and N2 legacy under meson64, same u-boot
- upgrade legacy kernel to meed DTB from mainline
- merge N2 and N2+, add a hack to display + in motd when N2+ is detected
- shortly spin N2 fan at startup
- merged N2 mainline and legacy boot script
- add upstream patches
* One of the regulators were breaking booting of Odroid N2
Co-authored-by: Werner <EvilOlaf@users.noreply.github.com>
* enable root auto login on first boot, automatically determine timezone from geolocation
* Improve tzdata and locales detection
* Add timeouts for Curl and support for selecting more locales per location.
* Disable NetworkManager-wait-online.service
https://askubuntu.com/questions/1018576/what-does-networkmanager-wait-online-service-do
* Improve overall UX when creating new username and changing root password
- check password quality and reject if not good enough. Not very heavy.
- shorter way of adding new username
* Resolve killing inactive consoles, remove FAQ silently since we open more consoles
Since 1a04b50674 triggered comments like 'stupid, lazy, technical criticism, dick, you vs. us' most probably it's the best to focus on Armbian's current mantra 'quantity first, quality second' (trying to provide OS images for as much SBC as possible so it's ensured none of these things can be supported properly).
Within the last 2 years nobody gave a shit about low-level optimizations except @paolosabatino when adding support for RK322X. Macchiatobin, La Frite, RockPi S, Odroid C4 and N2 are all plagued by an artificial bottleneck on `cpu0`. Other boards that were added since 2018 inherited already present optimizations more or less by accident. So let's try to be consistent and destroy N2 performance to be in sync with almost all other Armbian additions of the past few years. Shit like this https://forum.armbian.com/topic/14469-odroid-n2-single-cpu-handling-all-the-interrupts/ is Armbian's future.
Fix for locales where the decimal separator is a 'comma'. For these systems `uptime` would output `load average: 0,06, 0,08, 0,07`. And then it would be possible for `006` to be above `critical_load`. Forcing the dot separator with `LC_ALL=C uptime` fixes this issue.
* Initial commit for kernel boot splash
* Add startup files to disable bootlog when system is up / down
* Update logo, remove deprecated one
* Introduce new u-boot variable bootlogo
* Adjust kernel config
* Make logo possible on Odroid XU4
- add legacy and current upstream patches
- delete xu4 environment since its not used
* Cleanup C2,C4, both tested, logo works on mainline,
- adding legacy upstream patches for c4
* Enable bootlogo by default on Odroid N2
* Enable logo on RK3399 desktop images
* Cleanup the rest of the environment files
* Add initrd hook that copy splash file to initrd.
* Missing logo bits for one boot scripts
* Enable boot logo on Pinebook A64
* Enable bootlogo on Teres
* Update config
