If the array exists in this location, initializing an empty array
will destroy all the data that was stored in it.
Do not initialize an empty KERNEL_DRIVERS_SKIP array if it exists.
This allows us to create an array anywhere in the script,
including the user configuration, in a secure way.
This is tested on a tinkerboard 2s.
The u-boot dts for tb2 contains other fixes, and the major ones are:
- add missing basic gpio-fan node
- usb-c altmode fix, dts part
- we've too much logic in `chroot_sdcard_apt_get()` we need to re-use
for eg debfoster or any extensions that need to manipulate the apt
cache (which is handled via mounts in that function)
- `chroot_sdcard_apt_get()` now accepts a `chroot_command` env var,
defaulting to `apt-get`
- `chroot_sdcard_custom_with_apt_logic()` splits the params and calls
`chroot_command=... chroot_sdcard_apt_get ...` allowing for custom
calls
Use all parameters to display_alert()
```
[🐳|🌱] Running in container [ Adding provisions for container building ]
[🐳|🌱] Adding package to 'host_dependencies' [ python3-setuptools ]
[🐳|🌱] Python2 not available on host release 'noble' [ ancient u-boot versions might/will fail to build ]
```
- aimed at nanopi-r2s and nanopineo3
- impacts:
- boards (re)using 'nanopi-r2s-rk3328_defconfig' (rk3328)
and:
- boards using U-Boot v2022.04 or
- boards using U-Boot v2022.07
- added explicit dependency on python3-setuptools as (at least) U-Boot
v2022.04 and v2022.07 fail building due to missing 'distutils' for
boards that use U-Boot v2022.04 or v2022.07
- similar to e9708b8c33, but for the Blade3
- this reverts d048673c00 just for the Blade3
- there is little to be gained from .10 anyway on those machines (IMHO)
- it is still vendor 2017.09 after all, dunno why Radxa calls them "2024.x"
- 7s+ -> 3s
- by using `enable_extensions_with_hostdeps_builtin_and_user "add_host_dependencies" "host_dependencies_known"` instead of `enable_all_extensions_builtin_and_user`
- UMS mode (use the black USB port)
- Boot order: SD -> NVMe -> SATA -> USB -> eMMC
- Flash LEDs in preboot
- Networking stuff
- Lots of FS's and compression methods
* helios4: fix wake-on-lan (wol)
- added ethtool package
- enable wol on all ethernet interfaces
- support common systemd.net-naming-schemes (ethX/endX/enoX)
* Update helios4-wol.service
Removed test code.
* Update helios4-wol.service
Fix bug after retesting.
From the Kconfig:
```
Preload default EDID (Extended Display Identification Data)
branded by Linux Foundation that exposes display modes up
to 4k@30Hz, which have best compatibility with HDMI transmitters.
Enabling this option is recommended for a non-production use-cases.
It will make driver usable out-of-the-box.
For a higher display modes you will need to load customized EDID
from userspace using v4l2-ctl tool or by other means.
Without enabling this option driver will be practically
non-functional until EDID will be loaded from userspace.
Which is a wanted behavior when using this driver in a
commercial product that should utilize own branded EDID.
```
