Removed WIP status
Added CONFIG_R8169=m to defconfig(s) (eth support)
Modified and added additional patches (linux 6.1 / 6.4)
U-Boot v2023.07.2 (dropped v2022.10)
Upstream BT FW (rtl8822cs) is now shared between CM4IO and M2s
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
The /dev/mapper directory created by devtmpfs lacked entry for
armbian-root thereby breaking the cryptsetup configuration generated
within initrd file. Use bind mount as that doesn't seem to suffer from
that issue.
We were not monitoring /usr/share/initramfs-tools before where most
of extra hooks gets installed. While testing builds with CRYPTROOT
I created build with dropbear ssh key unlock support first and then
went for password only, but it still used initrd image with dropbear
files and older keys. Including /usr/share/initramfs-tools fixes the
same. Also as dropbear keys were autogenerated, they needed to be
monitored as well.
Disabled broken patches that are upstream or not needed due to
upstream changes. Modified thermal-sun8i-Be-loud-when-probe-fails.patch
to fix patch application
* Added `shell.nix` definition for temporary development environment for Nix(OS)
* Set uuidgen and other binaries check to not rely on hard-codded paths
With this change, setting EXTRAWIFI=no will disable all wireless
patches applied within drivers_network.sh script. Also since #5265
the rtl88x2cs patches were suppose to be not applied to 6.1+ kernel
onwards, instead they were disabled entirely. As this was done by
adding EXTRAWIFI=no, its now replaced with kernel version limit.
Keeping EXTRAWIFI=no there would have made those patches to apply
which would have changed the meaning of the flag.
Cope with the fix in stable 6.3.13 bf353116d1bf and 6.5-rc1 e8c2af660ba0
"wifi: cfg80211: fix regulatory disconnect with OCB/NAN".
That is the removal of REGULATORY_IGNORE_STALE_KICKOFF
from the wireless regulator internal API to fix any driver
that allowed OCB/NAN.
Note this code will need to be expanded once and if 6.4 include the
above fixup.
Signed-off-by: Alban Browaeys <alban.browaeys@gmail.com>
- `2023.04` fails during USB init, thus using 23.01 (23.07 untested)
- `blobless` with newer 2.8.5 ATF
- the previous problems with PCIe are _not_ totally solved by this
Use multiple consecutive reads in rtw_sdio_read_port() to limit the number of bytes which are copied by the host from the card in one MMC/SDIO transfer. This allows receiving a buffer that's larger than the hosts max_req_size (number of bytes which can be transferred in one MMC/SDIO transfer). As a result of this the skb_over_panic error is gone as the rtw88 driver is now able to receive more than 1536 bytes from the card (either because the incoming packet is larger than that or because multiple packets have been aggregated).
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
