* rockchip: Add NanoPi M5 board support to edge kernel
* rockchip64: enable Rockchip ASoC drivers and codecs in kernel config
* config: Fix audio Kconfig tristate hierarchy
Set CONFIG_SOUND, CONFIG_SND, and CONFIG_SND_SOC to built-in (y)
to allow Rockchip audio drivers to be built-in instead of being
silently downgraded to modules by olddefconfig.
* nanopi-m5: Add asound.state for audio configuration
* nanopi-m5: Fix SAI2 clock output
The old method carried along with board-pbp-add-dp-alt-mode.patch only
makes typec work in one(normal) orientation. This patch introduces a
proper extcon driver and makes the workaround cleaner, so orientation
switch is working.
Improvements:
- type-c DP on rk3399 works with both orientations
- type-c USB 3.0 on rk3399 works with both orientations, with minor
issues, see below
Caveats:
- Powered USB-C hubs may be not recognized, and can be worked around by
loading a gadget driver, or manually toggling the mode once for each
connection.
- Some dual-role devices(phone, tablet) may be not recognized.
Affected boards:
- TinkerBoard 2/2S
- Pinebook Pro
- NanoPC T4
- Orange Pi 4
- Orange Pi 4 LTS
Tested on tinkerboard 2s. This patch contains other minor fixes for
tinker2's device tree, including adding a missing fan node, adding color
labels to leds.
The 2 patches adding dp support for nanopc t4 and pinebook pro are also
updated accordingly.
The device trees of Orange Pi 4 / 4 LTS are also updated to match the
new implementation.
Change from "y" to "m"
Before
[ 2.423992] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.424718] rtc-hym8563 1-0051: registered as rtc0
[ 2.425770] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.425789] rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
[ 3.817166] rk808-rtc rk808-rtc.5.auto: registered as rtc1
After
[ 3.790107] rk808-rtc rk808-rtc.5.auto: registered as rtc0
[ 3.801742] rk808-rtc rk808-rtc.5.auto: setting system clock to 2017-08-05T09:48:13 UTC (1501926493)
[ 3.919628] rtc-hym8563 1-0051: registered as rtc1
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
From the Kconfig:
```
Preload default EDID (Extended Display Identification Data)
branded by Linux Foundation that exposes display modes up
to 4k@30Hz, which have best compatibility with HDMI transmitters.
Enabling this option is recommended for a non-production use-cases.
It will make driver usable out-of-the-box.
For a higher display modes you will need to load customized EDID
from userspace using v4l2-ctl tool or by other means.
Without enabling this option driver will be practically
non-functional until EDID will be loaded from userspace.
Which is a wanted behavior when using this driver in a
commercial product that should utilize own branded EDID.
```
* rockchip64: edge: rewrite kernel config
* rockchip64: edge: set CONFIG_SECURITY_DMESG_RESTRICT=y
Advised for KASLR-enabled kernels - no side effect for non-KASLR
* rockchip64: current: rewrite kernel config
* rockchip64: current: set CONFIG_SECURITY_DMESG_RESTRICT=y
Advised for KASLR-enabled kernels - no side effect for non-KASLR
* rockchip64: refresh kernel config of current and edge branch
* rockchip64: enable ARM_PSCI_CPUIDLE for current and edge branch
---------
Co-authored-by: Igor <igor@armbian.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
