sunxi-6.6: Add BananaPi M4 Berry support
This commit is contained in:
The-going
Igor
parent
a544dbd8b5
commit
ddaccc6bac
@ -0,0 +1,512 @@
|
||||
From 83dd3e784cf7a6f7e5271740e01dd0dd98b3d618 Mon Sep 17 00:00:00 2001
|
||||
From: The-going <48602507+The-going@users.noreply.github.com>
|
||||
Date: Wed, 19 Feb 2025 11:20:08 +0300
|
||||
Subject: [PATCH] arm64: dts: Add BananaPi M4 Berry support
|
||||
|
||||
---
|
||||
arch/arm64/boot/dts/allwinner/Makefile | 1 +
|
||||
.../sun50i-h618-bananapi-m4-berry.dts | 480 ++++++++++++++++++
|
||||
2 files changed, 481 insertions(+)
|
||||
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-bananapi-m4-berry.dts
|
||||
|
||||
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
|
||||
index 3f0bb0aae3ff..394cded5e038 100644
|
||||
--- a/arch/arm64/boot/dts/allwinner/Makefile
|
||||
+++ b/arch/arm64/boot/dts/allwinner/Makefile
|
||||
@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-cherryba-m1.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-sd.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-emmc.dtb
|
||||
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-bananapi-m4-berry.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-bananapi-m4-zero.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
|
||||
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-bananapi-m4-berry.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-bananapi-m4-berry.dts
|
||||
new file mode 100644
|
||||
index 000000000000..0cd6c6d83a4b
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-bananapi-m4-berry.dts
|
||||
@@ -0,0 +1,480 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
|
||||
+/*
|
||||
+ * Copyright (C) 2020 Arm Ltd.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "sun50i-h616.dtsi"
|
||||
+#include "sun50i-h616-cpu-opp.dtsi"
|
||||
+/* #include "axp313a.dtsi" */
|
||||
+
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+#include <dt-bindings/leds/common.h>
|
||||
+
|
||||
+/ {
|
||||
+ model = "BananaPi M4 Berry";
|
||||
+ compatible = "BiPai,bananapi-m4berry", "allwinner,sun50i-h616";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &emac0;
|
||||
+ ethernet1 = &emac1;
|
||||
+ serial0 = &uart0;
|
||||
+ serial5 = &uart5;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ connector {
|
||||
+ compatible = "hdmi-connector";
|
||||
+ type = "d";
|
||||
+
|
||||
+ port {
|
||||
+ hdmi_con_in: endpoint {
|
||||
+ remote-endpoint = <&hdmi_out_con>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+
|
||||
+ key-sw3 {
|
||||
+ label = "sw3";
|
||||
+ linux,code = <BTN_0>;
|
||||
+ gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
|
||||
+ wakeup-source;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ leds: leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ led-0 {
|
||||
+ color = <LED_COLOR_ID_RED>;
|
||||
+ function = LED_FUNCTION_STATUS;
|
||||
+ gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ wifi_usb {
|
||||
+ compatible = "usb-wifi";
|
||||
+ status = "okay";
|
||||
+ power_on_pin = <&pio 2 2 GPIO_ACTIVE_HIGH>; /* PC2 */
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc5v: vcc5v {
|
||||
+ /* board wide 5V supply directly from the USB-C socket */
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc-5v";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ reg_gmac_3v3: gmac-3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "gmac-3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <®_vcc5v>;
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc3v3: vcc3v3 {
|
||||
+ /* SY8089 DC/DC converter */
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc-3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <®_vcc5v>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc_wifi_io: vcc-wifi-io {
|
||||
+ /* Always on 1.8V/300mA regulator for WiFi and BT IO */
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc-wifi-io";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <®_vcc3v3>;
|
||||
+ };
|
||||
+
|
||||
+ ac200_pwm_clk: ac200_clk {
|
||||
+ compatible = "pwm-clock";
|
||||
+ #clock-cells = <0>;
|
||||
+ // pwm5 period_ns = 500 > 334 for select 24M clock.
|
||||
+ pwms = <&pwm 5 500 0>;
|
||||
+ clock-frequency = <2000000>;
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ soc {
|
||||
+ pwm: pwm@300a000 {
|
||||
+ compatible = "allwinner,sun50i-h616-pwm";
|
||||
+ reg = <0x0300a000 0x400>;
|
||||
+ clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
|
||||
+ clock-names = "mod", "bus";
|
||||
+ resets = <&ccu RST_BUS_PWM>;
|
||||
+ pwm-number = <6>;
|
||||
+ pwm-base = <0x0>;
|
||||
+ sunxi-pwms = <&pwm0>, <&pwm1>, <&pwm2>, <&pwm3>, <&pwm4>, <&pwm5>;
|
||||
+ #pwm-cells = <3>;
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ pwm0: pwm0@0300a000 {
|
||||
+ compatible = "allwinner,sunxi-pwm0";
|
||||
+ reg = <0x0 0x0300a010 0x0 0x4>;
|
||||
+ reg_base = <0x0300a000>;
|
||||
+ };
|
||||
+
|
||||
+ pwm1: pwm1@0300a000 {
|
||||
+ compatible = "allwinner,sunxi-pwm1";
|
||||
+ reg = <0x0 0x0300a010 0x0 0x4>;
|
||||
+ reg_base = <0x0300a000>;
|
||||
+ };
|
||||
+
|
||||
+ pwm2: pwm2@0300a000 {
|
||||
+ compatible = "allwinner,sunxi-pwm2";
|
||||
+ reg = <0x0 0x0300a012 0x0 0x4>;
|
||||
+ reg_base = <0x0300a000>;
|
||||
+ };
|
||||
+
|
||||
+ pwm3: pwm3@0300a000 {
|
||||
+ compatible = "allwinner,sunxi-pwm3";
|
||||
+ reg = <0x0 0x0300a013 0x0 0x4>;
|
||||
+ reg_base = <0x0300a000>;
|
||||
+ };
|
||||
+
|
||||
+ pwm4: pwm4@0300a000 {
|
||||
+ compatible = "allwinner,sunxi-pwm4";
|
||||
+ reg = <0x0 0x0300a013 0x0 0x4>;
|
||||
+ reg_base = <0x0300a000>;
|
||||
+ };
|
||||
+
|
||||
+ pwm5: pwm5@0300a000 {
|
||||
+ compatible = "allwinner,sunxi-pwm5";
|
||||
+ reg = <0x0 0x0300a015 0x0 0x4>;
|
||||
+ reg_base = <0x0300a000>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pwm5_pin>;
|
||||
+ clk_bypass_output = <0x1>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&de {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi {
|
||||
+ hvcc-supply = <®_aldo1>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi_out {
|
||||
+ hdmi_out_con: endpoint {
|
||||
+ remote-endpoint = <&hdmi_con_in>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&gpu {
|
||||
+ mali-supply = <®_dcdc1>;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&emac0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&ext_rgmii_pins>;
|
||||
+ phy-mode = "rgmii";
|
||||
+ phy-handle = <&ext_rgmii_phy>;
|
||||
+ allwinner,rx-delay-ps = <3100>;
|
||||
+ allwinner,tx-delay-ps = <700>;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&mdio0 {
|
||||
+ ext_rgmii_phy: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&emac1 {
|
||||
+ phy-mode = "rmii";
|
||||
+ phy-handle = <&rmii_phy>;
|
||||
+ phy-supply = <®_dldo1>;
|
||||
+ allwinner,rx-delay-ps = <3100>;
|
||||
+ allwinner,tx-delay-ps = <700>;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&mdio1 {
|
||||
+ rmii_phy: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc0 {
|
||||
+ vmmc-supply = <®_dldo1>;
|
||||
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
||||
+ bus-width = <4>;
|
||||
+ max-frequency = <50000000>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc2 {
|
||||
+ vmmc-supply = <®_dldo1>;
|
||||
+ vqmmc-supply = <®_aldo1>;
|
||||
+ bus-width = <8>;
|
||||
+ non-removable;
|
||||
+ cap-mmc-hw-reset;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pio {
|
||||
+ vcc-pc-supply = <®_aldo1>;
|
||||
+ vcc-pf-supply = <®_dldo1>;
|
||||
+ vcc-pg-supply = <®_dldo1>;
|
||||
+ vcc-ph-supply = <®_dldo1>;
|
||||
+ vcc-pi-supply = <®_dldo1>;
|
||||
+};
|
||||
+
|
||||
+&r_i2c {
|
||||
+ pinctrl-0 = <&r_i2c_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ status = "okay";
|
||||
+
|
||||
+ axp313a: pmic@36 {
|
||||
+ compatible = "x-powers,axp313a";
|
||||
+ reg = <0x36>;
|
||||
+ wakeup-source;
|
||||
+
|
||||
+ vin1-supply = <®_vcc5v>;
|
||||
+ vin2-supply = <®_vcc5v>;
|
||||
+ vin3-supply = <®_vcc5v>;
|
||||
+
|
||||
+ regulators{
|
||||
+ reg_dcdc1: dcdc1 {
|
||||
+ regulator-name = "dcdc1-gpu";
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1100000>;
|
||||
+ regulator-step-delay-us = <25>;
|
||||
+ regulator-final-delay-us = <50>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ reg_dcdc2: dcdc2 {
|
||||
+ regulator-name = "dcdc2-cpu";
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1200000>;
|
||||
+ regulator-step-delay-us = <25>;
|
||||
+ regulator-final-delay-us = <50>;
|
||||
+ regulator-ramp-delay = <200>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ reg_dcdc3: dcdc3 {
|
||||
+ regulator-name = "dcdc3-dram";
|
||||
+ regulator-min-microvolt = <1100000>;
|
||||
+ regulator-max-microvolt = <1100000>;
|
||||
+ regulator-step-delay-us = <25>;
|
||||
+ regulator-final-delay-us = <50>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ reg_aldo1: aldo1 {
|
||||
+ regulator-name = "aldo1-1v8";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-step-delay-us = <25>;
|
||||
+ regulator-final-delay-us = <50>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ reg_dldo1: dldo1 {
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-step-delay-us = <25>;
|
||||
+ regulator-final-delay-us = <50>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart0_ph_pins>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbotg {
|
||||
+ /*
|
||||
+ * PHY0 pins are connected to a USB-C socket, but a role switch
|
||||
+ * is not implemented: both CC pins are pulled to GND.
|
||||
+ * The VBUS pins power the device, so a fixed peripheral mode
|
||||
+ * is the best choice.
|
||||
+ * The board can be powered via GPIOs, in this case port0 *can*
|
||||
+ * act as a host (with a cable/adapter ignoring CC), as VBUS is
|
||||
+ * then provided by the GPIOs. Any user of this setup would
|
||||
+ * need to adjust the DT accordingly: dr_mode set to "host",
|
||||
+ * enabling OHCI0 and EHCI0.
|
||||
+ */
|
||||
+ dr_mode = "peripheral";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbphy {
|
||||
+ usb1_vbus-supply = <®_vcc5v>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci0 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&ehci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci0 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&ohci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ir {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&ir_rx_pin>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c1 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&i2c2 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&i2c3 {
|
||||
+ status = "okay";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&i2c3_pa_pins>;
|
||||
+
|
||||
+ ac200_x: mfd@10 {
|
||||
+ compatible = "x-powers,ac200-sunxi";
|
||||
+ reg = <0x10>;
|
||||
+ clocks = <&ac200_pwm_clk>;
|
||||
+ // ephy id
|
||||
+ nvmem-cells = <&ephy_calibration>;
|
||||
+ nvmem-cell-names = "calibration";
|
||||
+
|
||||
+ ac200_ephy: phy {
|
||||
+ compatible = "x-powers,ac200-ephy-sunxi";
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2c4 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart2 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart2_pins>;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&uart5 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart5_pins>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&spi1 {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&spi1_pins>, <&spi1_cs1_pin>;
|
||||
+
|
||||
+ spidev@1 {
|
||||
+ compatible = "rohm,dh2228fv";
|
||||
+ status = "okay";
|
||||
+ reg = <1>;
|
||||
+ spi-max-frequency = <1000000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&codec {
|
||||
+ allwinner,audio-routing =
|
||||
+ "Line Out", "LINEOUT";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ahub_dam_plat {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+/*
|
||||
+&ahub_dam_mach {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+*/
|
||||
+&ahub1_plat {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ahub1_mach {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+/*
|
||||
+&ahub_i2s2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+*/
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <®_dcdc2>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sid {
|
||||
+ ephy_calibration: ephy-calibration@2c {
|
||||
+ reg = <0x2c 0x2>;
|
||||
+ };
|
||||
+};
|
||||
--
|
||||
2.35.3
|
||||
|
||||
@ -203,3 +203,4 @@
|
||||
patches.armbian/Add-BananaPi-BPI-M4-Zero-pinctrl.patch
|
||||
patches.armbian/Fix-ghost-touches-on-tsc2007-tft-screen.patch
|
||||
patches.armbian/bigtereetech-cb1-i2c-gpio-and-ws2812.patch
|
||||
patches.armbian/arm64-dts-Add-BananaPi-M4-Berry-support.patch
|
||||
|
||||
@ -452,3 +452,4 @@
|
||||
patches.armbian/Add-BananaPi-BPI-M4-Zero-pinctrl.patch
|
||||
patches.armbian/Fix-ghost-touches-on-tsc2007-tft-screen.patch
|
||||
patches.armbian/bigtereetech-cb1-i2c-gpio-and-ws2812.patch
|
||||
patches.armbian/arm64-dts-Add-BananaPi-M4-Berry-support.patch
|
||||
|
||||
Loading…
Reference in New Issue
Block a user