From ddaccc6baca5c81f53754ee55e68b6884090be56 Mon Sep 17 00:00:00 2001 From: The-going <48602507+The-going@users.noreply.github.com> Date: Wed, 19 Feb 2025 11:54:09 +0300 Subject: [PATCH] sunxi-6.6: Add BananaPi M4 Berry support --- ...64-dts-Add-BananaPi-M4-Berry-support.patch | 512 ++++++++++++++++++ patch/kernel/archive/sunxi-6.6/series.armbian | 1 + patch/kernel/archive/sunxi-6.6/series.conf | 1 + 3 files changed, 514 insertions(+) create mode 100644 patch/kernel/archive/sunxi-6.6/patches.armbian/arm64-dts-Add-BananaPi-M4-Berry-support.patch diff --git a/patch/kernel/archive/sunxi-6.6/patches.armbian/arm64-dts-Add-BananaPi-M4-Berry-support.patch b/patch/kernel/archive/sunxi-6.6/patches.armbian/arm64-dts-Add-BananaPi-M4-Berry-support.patch new file mode 100644 index 0000000000..d182ccd692 --- /dev/null +++ b/patch/kernel/archive/sunxi-6.6/patches.armbian/arm64-dts-Add-BananaPi-M4-Berry-support.patch @@ -0,0 +1,512 @@ +From 83dd3e784cf7a6f7e5271740e01dd0dd98b3d618 Mon Sep 17 00:00:00 2001 +From: The-going <48602507+The-going@users.noreply.github.com> +Date: Wed, 19 Feb 2025 11:20:08 +0300 +Subject: [PATCH] arm64: dts: Add BananaPi M4 Berry support + +--- + arch/arm64/boot/dts/allwinner/Makefile | 1 + + .../sun50i-h618-bananapi-m4-berry.dts | 480 ++++++++++++++++++ + 2 files changed, 481 insertions(+) + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-bananapi-m4-berry.dts + +diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile +index 3f0bb0aae3ff..394cded5e038 100644 +--- a/arch/arm64/boot/dts/allwinner/Makefile ++++ b/arch/arm64/boot/dts/allwinner/Makefile +@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-cherryba-m1.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-sd.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-emmc.dtb ++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-bananapi-m4-berry.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-bananapi-m4-zero.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb +diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-bananapi-m4-berry.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-bananapi-m4-berry.dts +new file mode 100644 +index 000000000000..0cd6c6d83a4b +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-bananapi-m4-berry.dts +@@ -0,0 +1,480 @@ ++// SPDX-License-Identifier: (GPL-2.0+ or MIT) ++/* ++ * Copyright (C) 2020 Arm Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "sun50i-h616.dtsi" ++#include "sun50i-h616-cpu-opp.dtsi" ++/* #include "axp313a.dtsi" */ ++ ++#include ++#include ++#include ++#include ++ ++/ { ++ model = "BananaPi M4 Berry"; ++ compatible = "BiPai,bananapi-m4berry", "allwinner,sun50i-h616"; ++ ++ aliases { ++ ethernet0 = &emac0; ++ ethernet1 = &emac1; ++ serial0 = &uart0; ++ serial5 = &uart5; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ connector { ++ compatible = "hdmi-connector"; ++ type = "d"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ key-sw3 { ++ label = "sw3"; ++ linux,code = ; ++ gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ ++ wakeup-source; ++ }; ++ }; ++ ++ leds: leds { ++ compatible = "gpio-leds"; ++ ++ led-0 { ++ color = ; ++ function = LED_FUNCTION_STATUS; ++ gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ ++ linux,default-trigger = "heartbeat"; ++ }; ++ }; ++ ++ wifi_usb { ++ compatible = "usb-wifi"; ++ status = "okay"; ++ power_on_pin = <&pio 2 2 GPIO_ACTIVE_HIGH>; /* PC2 */ ++ }; ++ ++ reg_vcc5v: vcc5v { ++ /* board wide 5V supply directly from the USB-C socket */ ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-5v"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ vin-supply = <®_vcc5v>; ++ }; ++ ++ reg_vcc3v3: vcc3v3 { ++ /* SY8089 DC/DC converter */ ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <®_vcc5v>; ++ regulator-always-on; ++ }; ++ ++ reg_vcc_wifi_io: vcc-wifi-io { ++ /* Always on 1.8V/300mA regulator for WiFi and BT IO */ ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-wifi-io"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ vin-supply = <®_vcc3v3>; ++ }; ++ ++ ac200_pwm_clk: ac200_clk { ++ compatible = "pwm-clock"; ++ #clock-cells = <0>; ++ // pwm5 period_ns = 500 > 334 for select 24M clock. ++ pwms = <&pwm 5 500 0>; ++ clock-frequency = <2000000>; ++ status = "okay"; ++ }; ++ ++ soc { ++ pwm: pwm@300a000 { ++ compatible = "allwinner,sun50i-h616-pwm"; ++ reg = <0x0300a000 0x400>; ++ clocks = <&osc24M>, <&ccu CLK_BUS_PWM>; ++ clock-names = "mod", "bus"; ++ resets = <&ccu RST_BUS_PWM>; ++ pwm-number = <6>; ++ pwm-base = <0x0>; ++ sunxi-pwms = <&pwm0>, <&pwm1>, <&pwm2>, <&pwm3>, <&pwm4>, <&pwm5>; ++ #pwm-cells = <3>; ++ status = "okay"; ++ }; ++ ++ pwm0: pwm0@0300a000 { ++ compatible = "allwinner,sunxi-pwm0"; ++ reg = <0x0 0x0300a010 0x0 0x4>; ++ reg_base = <0x0300a000>; ++ }; ++ ++ pwm1: pwm1@0300a000 { ++ compatible = "allwinner,sunxi-pwm1"; ++ reg = <0x0 0x0300a010 0x0 0x4>; ++ reg_base = <0x0300a000>; ++ }; ++ ++ pwm2: pwm2@0300a000 { ++ compatible = "allwinner,sunxi-pwm2"; ++ reg = <0x0 0x0300a012 0x0 0x4>; ++ reg_base = <0x0300a000>; ++ }; ++ ++ pwm3: pwm3@0300a000 { ++ compatible = "allwinner,sunxi-pwm3"; ++ reg = <0x0 0x0300a013 0x0 0x4>; ++ reg_base = <0x0300a000>; ++ }; ++ ++ pwm4: pwm4@0300a000 { ++ compatible = "allwinner,sunxi-pwm4"; ++ reg = <0x0 0x0300a013 0x0 0x4>; ++ reg_base = <0x0300a000>; ++ }; ++ ++ pwm5: pwm5@0300a000 { ++ compatible = "allwinner,sunxi-pwm5"; ++ reg = <0x0 0x0300a015 0x0 0x4>; ++ reg_base = <0x0300a000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm5_pin>; ++ clk_bypass_output = <0x1>; ++ }; ++ }; ++}; ++ ++&de { ++ status = "okay"; ++}; ++ ++&hdmi { ++ hvcc-supply = <®_aldo1>; ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ ++&gpu { ++ mali-supply = <®_dcdc1>; ++ status = "disabled"; ++}; ++ ++&emac0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ext_rgmii_pins>; ++ phy-mode = "rgmii"; ++ phy-handle = <&ext_rgmii_phy>; ++ allwinner,rx-delay-ps = <3100>; ++ allwinner,tx-delay-ps = <700>; ++ status = "disabled"; ++}; ++ ++&mdio0 { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ }; ++}; ++ ++&emac1 { ++ phy-mode = "rmii"; ++ phy-handle = <&rmii_phy>; ++ phy-supply = <®_dldo1>; ++ allwinner,rx-delay-ps = <3100>; ++ allwinner,tx-delay-ps = <700>; ++ status = "disabled"; ++}; ++ ++&mdio1 { ++ rmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ }; ++}; ++ ++&mmc0 { ++ vmmc-supply = <®_dldo1>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ ++ bus-width = <4>; ++ max-frequency = <50000000>; ++ status = "okay"; ++}; ++ ++&mmc2 { ++ vmmc-supply = <®_dldo1>; ++ vqmmc-supply = <®_aldo1>; ++ bus-width = <8>; ++ non-removable; ++ cap-mmc-hw-reset; ++ mmc-hs200-1_8v; ++ status = "okay"; ++}; ++ ++&pio { ++ vcc-pc-supply = <®_aldo1>; ++ vcc-pf-supply = <®_dldo1>; ++ vcc-pg-supply = <®_dldo1>; ++ vcc-ph-supply = <®_dldo1>; ++ vcc-pi-supply = <®_dldo1>; ++}; ++ ++&r_i2c { ++ pinctrl-0 = <&r_i2c_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ axp313a: pmic@36 { ++ compatible = "x-powers,axp313a"; ++ reg = <0x36>; ++ wakeup-source; ++ ++ vin1-supply = <®_vcc5v>; ++ vin2-supply = <®_vcc5v>; ++ vin3-supply = <®_vcc5v>; ++ ++ regulators{ ++ reg_dcdc1: dcdc1 { ++ regulator-name = "dcdc1-gpu"; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-step-delay-us = <25>; ++ regulator-final-delay-us = <50>; ++ regulator-always-on; ++ }; ++ ++ reg_dcdc2: dcdc2 { ++ regulator-name = "dcdc2-cpu"; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-step-delay-us = <25>; ++ regulator-final-delay-us = <50>; ++ regulator-ramp-delay = <200>; ++ regulator-always-on; ++ }; ++ ++ reg_dcdc3: dcdc3 { ++ regulator-name = "dcdc3-dram"; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-step-delay-us = <25>; ++ regulator-final-delay-us = <50>; ++ regulator-always-on; ++ }; ++ ++ reg_aldo1: aldo1 { ++ regulator-name = "aldo1-1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-step-delay-us = <25>; ++ regulator-final-delay-us = <50>; ++ regulator-always-on; ++ }; ++ ++ reg_dldo1: dldo1 { ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-step-delay-us = <25>; ++ regulator-final-delay-us = <50>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_ph_pins>; ++ status = "okay"; ++}; ++ ++&usbotg { ++ /* ++ * PHY0 pins are connected to a USB-C socket, but a role switch ++ * is not implemented: both CC pins are pulled to GND. ++ * The VBUS pins power the device, so a fixed peripheral mode ++ * is the best choice. ++ * The board can be powered via GPIOs, in this case port0 *can* ++ * act as a host (with a cable/adapter ignoring CC), as VBUS is ++ * then provided by the GPIOs. Any user of this setup would ++ * need to adjust the DT accordingly: dr_mode set to "host", ++ * enabling OHCI0 and EHCI0. ++ */ ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ usb1_vbus-supply = <®_vcc5v>; ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "disabled"; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&ehci2 { ++ status = "okay"; ++}; ++ ++&ehci3 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "disabled"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&ohci2 { ++ status = "okay"; ++}; ++ ++&ohci3 { ++ status = "okay"; ++}; ++ ++&ir { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir_rx_pin>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ status = "disabled"; ++}; ++ ++&i2c3 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c3_pa_pins>; ++ ++ ac200_x: mfd@10 { ++ compatible = "x-powers,ac200-sunxi"; ++ reg = <0x10>; ++ clocks = <&ac200_pwm_clk>; ++ // ephy id ++ nvmem-cells = <&ephy_calibration>; ++ nvmem-cell-names = "calibration"; ++ ++ ac200_ephy: phy { ++ compatible = "x-powers,ac200-ephy-sunxi"; ++ status = "okay"; ++ }; ++ }; ++}; ++ ++&i2c4 { ++ status = "disabled"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart2_pins>; ++ status = "disabled"; ++}; ++ ++&uart5 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart5_pins>; ++ status = "okay"; ++}; ++ ++&spi1 { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins>, <&spi1_cs1_pin>; ++ ++ spidev@1 { ++ compatible = "rohm,dh2228fv"; ++ status = "okay"; ++ reg = <1>; ++ spi-max-frequency = <1000000>; ++ }; ++}; ++ ++&codec { ++ allwinner,audio-routing = ++ "Line Out", "LINEOUT"; ++ status = "okay"; ++}; ++ ++&ahub_dam_plat { ++ status = "okay"; ++}; ++/* ++&ahub_dam_mach { ++ status = "okay"; ++}; ++*/ ++&ahub1_plat { ++ status = "okay"; ++}; ++ ++&ahub1_mach { ++ status = "okay"; ++}; ++/* ++&ahub_i2s2 { ++ status = "okay"; ++}; ++*/ ++&cpu0 { ++ cpu-supply = <®_dcdc2>; ++ status = "okay"; ++}; ++ ++&sid { ++ ephy_calibration: ephy-calibration@2c { ++ reg = <0x2c 0x2>; ++ }; ++}; +-- +2.35.3 + diff --git a/patch/kernel/archive/sunxi-6.6/series.armbian b/patch/kernel/archive/sunxi-6.6/series.armbian index 8cd7f64ccb..e84bf3422f 100644 --- a/patch/kernel/archive/sunxi-6.6/series.armbian +++ b/patch/kernel/archive/sunxi-6.6/series.armbian @@ -203,3 +203,4 @@ patches.armbian/Add-BananaPi-BPI-M4-Zero-pinctrl.patch patches.armbian/Fix-ghost-touches-on-tsc2007-tft-screen.patch patches.armbian/bigtereetech-cb1-i2c-gpio-and-ws2812.patch + patches.armbian/arm64-dts-Add-BananaPi-M4-Berry-support.patch diff --git a/patch/kernel/archive/sunxi-6.6/series.conf b/patch/kernel/archive/sunxi-6.6/series.conf index 8d70becc46..4d29d3f969 100644 --- a/patch/kernel/archive/sunxi-6.6/series.conf +++ b/patch/kernel/archive/sunxi-6.6/series.conf @@ -452,3 +452,4 @@ patches.armbian/Add-BananaPi-BPI-M4-Zero-pinctrl.patch patches.armbian/Fix-ghost-touches-on-tsc2007-tft-screen.patch patches.armbian/bigtereetech-cb1-i2c-gpio-and-ws2812.patch + patches.armbian/arm64-dts-Add-BananaPi-M4-Berry-support.patch