enoch/n2n
1
0
Fork 0
mirror of https://github.com/ntop/n2n.git synced 2024-09-19 16:41:11 +02:00
Code Issues Actions Packages Projects Releases 1 Wiki Activity
n2n/.gitignore

56 lines
972 B
Plaintext
Raw Normal View History

Create gitignore
2019-02-11 11:27:43 +01:00
*.o
*.a
*.gz
configure
config.*
Basic C Code lint checker and shell checker (#859) * Factor build packages out into a more maintainable list * Create a location for scripts to live * Provide a make target to return the source dir as close as reasonable to the original distributed state * Add a code lint step, checking the coding style * Change test harness as recommended by shellcheck * Ensure we actually have the linter tool installed * Use the correct directory for cmake to run the tests * Adjust for the older uncrustify in the current github ubuntu-latest * Make one file pass the linter * Integrate the lint with the existing test workflow * Add files with minimal changes needed to the linter * Add more files with minimal changes needed to the linter * Dont build binaries if we fail the lint test * Update the phony targets with the lint steps * Ensure the flake8 package is installed in the new lint workflow job * Use the makefile to drive the packages needed to install for linting * No need to add dependancies on lint, just rely on the workflow status to show failure * Update the scripts dir README to reflect current assumptions * Rename and briefly document the indent.sh script * Fix the ignore to ignore the right Makefile * Rename the test_harness script to make it clear it is a shell script * Provide a master lint make target and add a shell script lint tool * Elminate stray tabs * Drop include/auth.h from linter - there are inconsistant results with function definitions when using the current uncrustify rules
2021-10-23 21:36:18 +02:00
/Makefile
added mingw test platform (#829) * Provide a minimal reimplementation of our autoconf, to try windows builds * Try building with windows * Fix thinko in spelling * Ensure shell script runs inside a shell * Add a hack to aid include discovery * Just keep adding tech debt... * Assume that we will have slashes in some of the replacement strings and avoid that char with sed * Restore one slash * Hack around the tools makefile interdependancy bug * A correct cflags include hack for each compile dir * Ensure we link against winsock (note, even though this says 32bit, it should link the 64bit library ... I think) * Bad link ordering if we dont use LDLIBS * Remove unused make variable * Remove makefile duplication using inheritance (this does mean you can no longer cd tools; make, but must do make tools) * Add missing library for win32 * Show OS variable * Make hack autoconf more robust for tests on non gitlab runners * Remove no longer used substitutions from hack autoconf * Add missing include path to tools under win32 * Build the win32 subdir when the compiler is Msys * The different subdirs have different dependancies * Ensure we can find the include files * Fix library link ordering * Ensure the tools dir can find the special win32 lib * Deal with the differing basic type sizes on both linux/64bit and windows/64bit * Document the steps to mimic the github windows/mingw build locally - to allow for simpler debugging * Ensure branch name in instructions matches my test branch name * Clarify the shell needed to build with mingw * Since the makefile depends on knowing the OS, raise a fatal error if we cannot determine this * Handling different compile environments is hard. - Linux: sane and reasonable results for both uname -s (=Linux) and uname -o (=GNU/Linux) - Windows/Mingw: insane results for uname -s (=MSYS_NT-$MAJOR.$MINOR-$BUILDNR) but sane results for uname -o (Msys) - Macos: sane results for uname -s (=Darwin) but does not support uname -o at all * Revamp the way that Mingw is detected * Avoid attempting to generate gcovr report when running under windows * Whoops, isolate the right step * Fix spelling mistake * win32/Makefile: Remove unused setting and add comment * ensure that all win32 includes use the same expected path * Allow simpler cross compilation by letting configure pass the CC and AR environment through * Avoid multiple '_CRT_SECURE_NO_WARNINGS redefined' warnings * Convert to a consolidated CONFIG_TARGET variable to select any different compile options * Use the more generic printf defines to avoid warnings on mingw * Update mingw build docs * English better for reader happy make * Address a number of mingw compiler warnings * Fix Visual C compile * Be sure to document some of the hacky nature of the mingw build
2021-10-05 21:07:15 +02:00
tools/Makefile
Create gitignore
2019-02-11 11:27:43 +01:00
autom4te.cache
edge
Add more embedding examples and initally decomposed sn_utils
2020-03-16 15:03:03 +01:00
example_edge_embed_quick_edge_init
Create gitignore
2019-02-11 11:27:43 +01:00
example_edge_embed
Add more embedding examples and initally decomposed sn_utils
2020-03-16 15:03:03 +01:00
example_sn_embed
Create gitignore
2019-02-11 11:27:43 +01:00
supernode
Add tools subdirectory
2019-09-21 16:12:43 +02:00
tools/n2n-benchmark
tools/n2n-decode
added test framework and code coverage reporting (#797) * Add a simple test framework * Add a code coverage report example oneliner * Move the coverage report into a separate directory * Add a github action to run tests and publish a branch with the coverage report * Fix: Missing job separator * Fix: remember to actually run configure * Fix: Gotta autogen before I configure * Dont try to upload coverage report unless this is a push * Clearly show the git ref tested in the coverage report * Add a test for the various transforms * Add tests for the elliptic curve and pearson hash * Ensure we ignore new generated output * Remove unneeded boilerplate from the compression tests * Add an example of a test of the encoded wire packets * Ensure that correctly testable data is output even when zstd is not compiled * Factor test runner out into its own script and attempt to add it to the cmake file * Tell cmake about a new object file * Stop trying to make Cmake work... * Stop trying to make cmake work, round 2 * In the middle of a thousand lines of cmake output was one important one - windows could not find assert() - try again * Try again to plumb the tests into cmake * Add missing library to our superset install line * Fix build error when libcap-dev is installed * Switch to using artifact uploads instead of pages to store/show the coverage report * Fix artifact upload yaml * Upload coverage report to codecov * Fix codecov - clearly it doesnt do a recursive search for coverage files * Fix codecov - my hopeful use of a list of directories didnt work * Fix codecov - unfortunately, it doesnt just consume the coverage data and needs us to generate the gcov output * Fix codecov - nope, it still doesnt recursively search * Fix codecov - it really helps if I run the gcov data generator * Add a simple matrix build * Fix older ubuntu versions of gcovr that do not support the '--html-title' option * Ensure we use gcover options that are identical on older ubuntu * Improve coverage generation and required build packages
2021-09-27 11:41:06 +02:00
tools/n2n-keygen
Add more to gitignore
2022-11-14 21:34:36 +01:00
tools/n2n-portfwd
tools/n2n-route
Unify n2n version
2019-07-06 12:30:33 +02:00
build
Fix read tap device failed when OS wake up from sleep. Adjust the structure of the source file to the header file.
2020-07-06 07:17:01 +02:00
.idea
added port forwarding (upnp and natpmp) (#905) * UPnP port redirection is supported. * compile fixes * compile fix * optimize reconnection code * prepared upnp threadification to counter main loop stall at supernode change * NAT-PMP port forwarding support, temporarily merge codes to resolve conflicts. * make compile fix * prepared threadification in more detail * adopted threadification to new file setup * cleaned up * renamed functions and data structures * fixes * differentiated between miniupnp and natpmp and added corresponding lib support to makefile * name * commented unused header includes * comments * license * fixes * fixes * fixes * NAT-PMP is already available. * added CLI parameter to disable port forwarding if required * preliminary made use of multithreading * adjusted log level * added man page documentation * def'ed conf * made pmpnat adjustments Co-authored-by: fengdaolong <fengdaolong@gmail.com>
2021-12-23 12:27:55 +01:00
.vscode
Fix read tap device failed when OS wake up from sleep. Adjust the structure of the source file to the header file.
2020-07-06 07:17:01 +02:00
cmake-build-default
Update gitignore
2019-07-06 13:54:00 +02:00
packages/debian/debian/changelog
packages/debian/debian/control
packages/debian/debian/files
packages/debian/debian/rules
packages/etc/systemd/system/edge-ntopng@.service
packages/etc/systemd/system/edge.service
packages/etc/systemd/system/edge@.service
packages/etc/systemd/system/supernode.service
Remove duplicate definitions
2020-03-16 15:07:11 +01:00
*dSYM*
Add feature to drop or accept specific packet transmit over edge network interface by rules. (#489) * Add new file 'network_traffic_filter.c/.h" * Add feature to drop or accept specific packet transmit over edge network interface by rules. * fix CMakeLists.txt typo * Update Rule String Format * replace -F (filter) with -R (rule) for traffic restrictions. * Update edge help (-h) message. Update documents.
2020-11-10 16:35:05 +01:00
cmake-build-*/
added test framework and code coverage reporting (#797) * Add a simple test framework * Add a code coverage report example oneliner * Move the coverage report into a separate directory * Add a github action to run tests and publish a branch with the coverage report * Fix: Missing job separator * Fix: remember to actually run configure * Fix: Gotta autogen before I configure * Dont try to upload coverage report unless this is a push * Clearly show the git ref tested in the coverage report * Add a test for the various transforms * Add tests for the elliptic curve and pearson hash * Ensure we ignore new generated output * Remove unneeded boilerplate from the compression tests * Add an example of a test of the encoded wire packets * Ensure that correctly testable data is output even when zstd is not compiled * Factor test runner out into its own script and attempt to add it to the cmake file * Tell cmake about a new object file * Stop trying to make Cmake work... * Stop trying to make cmake work, round 2 * In the middle of a thousand lines of cmake output was one important one - windows could not find assert() - try again * Try again to plumb the tests into cmake * Add missing library to our superset install line * Fix build error when libcap-dev is installed * Switch to using artifact uploads instead of pages to store/show the coverage report * Fix artifact upload yaml * Upload coverage report to codecov * Fix codecov - clearly it doesnt do a recursive search for coverage files * Fix codecov - my hopeful use of a list of directories didnt work * Fix codecov - unfortunately, it doesnt just consume the coverage data and needs us to generate the gcov output * Fix codecov - nope, it still doesnt recursively search * Fix codecov - it really helps if I run the gcov data generator * Add a simple matrix build * Fix older ubuntu versions of gcovr that do not support the '--html-title' option * Ensure we use gcover options that are identical on older ubuntu * Improve coverage generation and required build packages
2021-09-27 11:41:06 +02:00
# Binaries built to run tests
Add more to gitignore
2022-11-14 21:34:36 +01:00
tools/tests-auth
added test framework and code coverage reporting (#797) * Add a simple test framework * Add a code coverage report example oneliner * Move the coverage report into a separate directory * Add a github action to run tests and publish a branch with the coverage report * Fix: Missing job separator * Fix: remember to actually run configure * Fix: Gotta autogen before I configure * Dont try to upload coverage report unless this is a push * Clearly show the git ref tested in the coverage report * Add a test for the various transforms * Add tests for the elliptic curve and pearson hash * Ensure we ignore new generated output * Remove unneeded boilerplate from the compression tests * Add an example of a test of the encoded wire packets * Ensure that correctly testable data is output even when zstd is not compiled * Factor test runner out into its own script and attempt to add it to the cmake file * Tell cmake about a new object file * Stop trying to make Cmake work... * Stop trying to make cmake work, round 2 * In the middle of a thousand lines of cmake output was one important one - windows could not find assert() - try again * Try again to plumb the tests into cmake * Add missing library to our superset install line * Fix build error when libcap-dev is installed * Switch to using artifact uploads instead of pages to store/show the coverage report * Fix artifact upload yaml * Upload coverage report to codecov * Fix codecov - clearly it doesnt do a recursive search for coverage files * Fix codecov - my hopeful use of a list of directories didnt work * Fix codecov - unfortunately, it doesnt just consume the coverage data and needs us to generate the gcov output * Fix codecov - nope, it still doesnt recursively search * Fix codecov - it really helps if I run the gcov data generator * Add a simple matrix build * Fix older ubuntu versions of gcovr that do not support the '--html-title' option * Ensure we use gcover options that are identical on older ubuntu * Improve coverage generation and required build packages
2021-09-27 11:41:06 +02:00
tools/tests-compress
tools/tests-elliptic
tools/tests-hashing
tools/tests-transform
tools/tests-wire
# Files generated while running tests
tests/*.out
# Files generated while running coverage reports
*.gcno
*.gcda
*.gcov
coverage/
Basic C Code lint checker and shell checker (#859) * Factor build packages out into a more maintainable list * Create a location for scripts to live * Provide a make target to return the source dir as close as reasonable to the original distributed state * Add a code lint step, checking the coding style * Change test harness as recommended by shellcheck * Ensure we actually have the linter tool installed * Use the correct directory for cmake to run the tests * Adjust for the older uncrustify in the current github ubuntu-latest * Make one file pass the linter * Integrate the lint with the existing test workflow * Add files with minimal changes needed to the linter * Add more files with minimal changes needed to the linter * Dont build binaries if we fail the lint test * Update the phony targets with the lint steps * Ensure the flake8 package is installed in the new lint workflow job * Use the makefile to drive the packages needed to install for linting * No need to add dependancies on lint, just rely on the workflow status to show failure * Update the scripts dir README to reflect current assumptions * Rename and briefly document the indent.sh script * Fix the ignore to ignore the right Makefile * Rename the test_harness script to make it clear it is a shell script * Provide a master lint make target and add a shell script lint tool * Elminate stray tabs * Drop include/auth.h from linter - there are inconsistant results with function definitions when using the current uncrustify rules
2021-10-23 21:36:18 +02:00
# Files generated while running linting
*.indent
*.unc-backup.md5~
*.unc-backup~
Reference in New Issue Copy Permalink