14452e25e6
* helios4: next branch use u-boot 2018 use new u-boot based on upstream 2018 Signed-off-by: Aditya Prayoga <aditya@kobol.io> * helios4: Tweak fancontrol configuration Adjusted MINSTART and MINSTOP to suit both old and new fan. Adjusted TEMP threshold so fan would stop or run in minimal speed when the system idle. Fixed wrong MINPWM value. URL:https://wiki.kobol.io/pwm/#configuration-file Signed-off-by: Aditya Prayoga <aditya@kobol.io> * kernel: mvebu-next: use upstream helios4 dts Helios4 device tree has been merged on upstream since 4.19. Rework the patch to produce same device tree. URL:https://patchwork.kernel.org/patch/10449393/ Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Helios4: Use boot-mvebu-next bootscript Use boot-mvebu-next.cmd that make use of upstream's Generic Distro Configuration. Since loadaddr and fdt_addr varibales are no longer required, remove the patch. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue Concurrent access on SPI NOR and SATA drives can lead to unstable SATA. Therefore as workaround, disable SATA controller when SPI flash access is needed and make it as user configurable item in armbianEnv.txt This workaround might applies to Clearfog too. Refer to Commit59af84c07c("Helios4: Add SPI bootloader install feature (#1126)") Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Bootscripts: Fixed boot-mvebu-next.cmd The environment setting (armbianEnv.txt) is loaded to RAM located on ${load_addr} but the env import use wrong address (${pxefile_addr_r}). bootargs still expect ${boot_interface} which carried over from boot- marvell.cmd. Upstream's distro configuration use ${devtype} instead. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * uboot: mvebu-next: only apply DT fixup script if it exists * [ buildscript ] Add FORCE_BOOTSCRIPT_UPDATE option If enabled bootscript will get updated during bsp upgrade. * Helios4: Enable FORCE_BOOTSCRIPT_UPDATE by default in board config. * Helios4: Added boot-marvell.cmd compability to u-boot 2018 Revert the changes to use boot-mvebu-next.cmd instead of boot- marvell.cmd to prevent unbootable system due to incompatibility between u-boot 2013.01 and boot-mvebu-next.cmd This reverts commit0f17ecb233("Helios4: Use boot-mvebu-next bootscript") U-Boot 2018 will failed load dtb and script due to missing some variables on boot-marvell.cmd. This will render the system unbootable. Re-added and update loading-boot-scr.patch for backward compatibility Signed-off-by: Aditya Prayoga <aditya@kobol.io>
81 lines
2.8 KiB
Batchfile
81 lines
2.8 KiB
Batchfile
# DO NOT EDIT THIS FILE
|
|
#
|
|
# Please edit /boot/armbianEnv.txt to set supported parameters
|
|
#
|
|
|
|
setenv load_addr "0x300000"
|
|
# default values
|
|
setenv rootdev "/dev/mmcblk0p1"
|
|
setenv rootfstype "ext4"
|
|
setenv verbosity "1"
|
|
setenv emmc_fix "off"
|
|
setenv ethaddr "00:50:43:84:fb:2f"
|
|
setenv eth1addr "00:50:43:25:fb:84"
|
|
setenv eth2addr "00:50:43:84:25:2f"
|
|
setenv eth3addr "00:50:43:0d:19:18"
|
|
|
|
echo "Boot script loaded from ${devtype}"
|
|
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt; then
|
|
env import -t ${load_addr} ${filesize}
|
|
fi
|
|
|
|
setenv bootargs "console=ttyS0,115200 root=${rootdev} rootwait rootfstype=${rootfstype} ubootdev=${devtype} scandelay loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
|
|
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
|
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
|
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}zImage
|
|
|
|
fdt addr ${fdt_addr_r}
|
|
fdt resize 65536
|
|
for overlay_file in ${overlays}; do
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
|
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
for overlay_file in ${user_overlays}; do
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
|
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
if test "${overlay_error}" = "true"; then
|
|
echo "Error applying DT overlays, restoring original DT"
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/rockchip/${fdtfile}
|
|
else
|
|
if test -e ${devtype} ${devnum} ${prefix}dtb/overlay/${overlay_prefix}-fixup.scr; then
|
|
load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-fixup.scr
|
|
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
|
source ${load_addr}
|
|
fi
|
|
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
|
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
|
echo "Applying user provided fixup script (fixup.scr)"
|
|
source ${load_addr}
|
|
fi
|
|
fi
|
|
|
|
# eMMC fix
|
|
if test "${emmc_fix}" = "on"; then
|
|
echo "Applying eMMC compatibility fix to the DT"
|
|
fdt rm /soc/internal-regs/sdhci@d8000/ cd-gpios
|
|
fdt set /soc/internal-regs/sdhci@d8000/ non-removable
|
|
fi
|
|
|
|
# SPI - SATA workaround
|
|
if test "${spi_workaround}" = "on"; then
|
|
echo "Applying SPI workaround to the DT"
|
|
fdt addr ${fdt_addr}
|
|
fdt resize
|
|
fdt set /soc/internal-regs/sata@e0000 status "disabled"
|
|
fdt set /soc/internal-regs/sata@a8000 status "disabled"
|
|
fdt set /soc/spi@10680 status "okay"
|
|
fdt set /soc/spi@10680/spi-flash@0 status "okay"
|
|
fi
|
|
|
|
bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
|
|
|
# Recompile with:
|
|
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|