b6ab198b43
The code was disabled some time ago, split it to a separate unit file and reenable. Since configuration file needs to be renamed to activate it, it won't be run by default.
39 lines
1.6 KiB
Plaintext
39 lines
1.6 KiB
Plaintext
#-----------------------------------------------------------------
|
|
# Armbian first run configuration
|
|
# Set optional end user configuration
|
|
# - Rename this file from /boot/armbian_first_run.txt.template to /boot/armbian_first_run.txt
|
|
# - Settings below will be applied only on 1st run of Armbian
|
|
#-----------------------------------------------------------------
|
|
|
|
#-----------------------------------------------------------------
|
|
# General:
|
|
# 1 = delete this file, after first run setup is completed.
|
|
# SECURITY WARN: Even if this file is deleted, it may still be accessible by recovery methods.
|
|
FR_general_delete_this_file_after_completion=1
|
|
|
|
#-----------------------------------------------------------------
|
|
#Networking:
|
|
# Change default network settings
|
|
# Set to 1 to apply any network related settings below
|
|
FR_net_change_defaults=0
|
|
|
|
# Enable WiFi or Ethernet.
|
|
# NB: If both are enabled, WiFi will take priority and Ethernet will be disabled.
|
|
FR_net_ethernet_enabled=1
|
|
FR_net_wifi_enabled=0
|
|
|
|
#Enter your WiFi creds
|
|
# SECURITY WARN: Your wifi keys will be stored in plaintext, no encryption.
|
|
FR_net_wifi_ssid='MySSID'
|
|
FR_net_wifi_key='MyWiFiKEY'
|
|
# Country code to enable power ratings and channels for your country. eg: GB US DE | https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2
|
|
FR_net_wifi_countrycode='GB'
|
|
|
|
#If you want to use a static ip, set it here
|
|
FR_net_use_static=0
|
|
FR_net_static_ip='192.168.0.100'
|
|
FR_net_static_mask='255.255.255.0'
|
|
FR_net_static_gateway='192.168.0.1'
|
|
FR_net_static_dns='8.8.8.8 8.8.4.4' #2 entries max, seperated by a space.
|
|
#-----------------------------------------------------------------
|