14452e25e6
* helios4: next branch use u-boot 2018 use new u-boot based on upstream 2018 Signed-off-by: Aditya Prayoga <aditya@kobol.io> * helios4: Tweak fancontrol configuration Adjusted MINSTART and MINSTOP to suit both old and new fan. Adjusted TEMP threshold so fan would stop or run in minimal speed when the system idle. Fixed wrong MINPWM value. URL:https://wiki.kobol.io/pwm/#configuration-file Signed-off-by: Aditya Prayoga <aditya@kobol.io> * kernel: mvebu-next: use upstream helios4 dts Helios4 device tree has been merged on upstream since 4.19. Rework the patch to produce same device tree. URL:https://patchwork.kernel.org/patch/10449393/ Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Helios4: Use boot-mvebu-next bootscript Use boot-mvebu-next.cmd that make use of upstream's Generic Distro Configuration. Since loadaddr and fdt_addr varibales are no longer required, remove the patch. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue Concurrent access on SPI NOR and SATA drives can lead to unstable SATA. Therefore as workaround, disable SATA controller when SPI flash access is needed and make it as user configurable item in armbianEnv.txt This workaround might applies to Clearfog too. Refer to Commit59af84c07c("Helios4: Add SPI bootloader install feature (#1126)") Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Bootscripts: Fixed boot-mvebu-next.cmd The environment setting (armbianEnv.txt) is loaded to RAM located on ${load_addr} but the env import use wrong address (${pxefile_addr_r}). bootargs still expect ${boot_interface} which carried over from boot- marvell.cmd. Upstream's distro configuration use ${devtype} instead. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * uboot: mvebu-next: only apply DT fixup script if it exists * [ buildscript ] Add FORCE_BOOTSCRIPT_UPDATE option If enabled bootscript will get updated during bsp upgrade. * Helios4: Enable FORCE_BOOTSCRIPT_UPDATE by default in board config. * Helios4: Added boot-marvell.cmd compability to u-boot 2018 Revert the changes to use boot-mvebu-next.cmd instead of boot- marvell.cmd to prevent unbootable system due to incompatibility between u-boot 2013.01 and boot-mvebu-next.cmd This reverts commit0f17ecb233("Helios4: Use boot-mvebu-next bootscript") U-Boot 2018 will failed load dtb and script due to missing some variables on boot-marvell.cmd. This will render the system unbootable. Re-added and update loading-boot-scr.patch for backward compatibility Signed-off-by: Aditya Prayoga <aditya@kobol.io>
28 lines
1.7 KiB
Plaintext
28 lines
1.7 KiB
Plaintext
# Read build script documentation http://www.armbian.com/using-armbian-tools/
|
||
# for detailed explanation of these options and for additional options not listed here
|
||
|
||
KERNEL_ONLY="" # leave empty to select each time, set to "yes" or "no" to skip dialog prompt
|
||
KERNEL_CONFIGURE="" # leave empty to select each time, set to "yes" or "no" to skip dialog prompt
|
||
CLEAN_LEVEL="make,debs,oldcache" # comma-separated list of clean targets: "make" = make clean for selected kernel and u-boot,
|
||
# "debs" = delete packages in "./output/debs" for current branch and family,
|
||
# "alldebs" = delete all packages in "./output/debs", "images" = delete "./output/images",
|
||
# "cache" = delete "./output/cache", "sources" = delete "./sources"
|
||
# "oldcache" = remove old cached rootfs except for the newest 8 files
|
||
|
||
DEST_LANG="en_US.UTF-8" # sl_SI.UTF-8, en_US.UTF-8
|
||
|
||
# advanced
|
||
KERNEL_KEEP_CONFIG="no" # do not overwrite kernel config before compilation
|
||
EXTERNAL="yes" # build and install extra applications and drivers
|
||
EXTERNAL_NEW="prebuilt" # compile and install or install prebuilt additional packages
|
||
CREATE_PATCHES="no" # wait that you make changes to uboot and kernel source and creates patches
|
||
BUILD_ALL="no" # cycle through available boards and make images or kernel/u-boot packages.
|
||
# set KERNEL_ONLY to "yes" or "no" to build all packages/all images
|
||
FORCE_BOOTSCRIPT_UPDATE="no" # update bootscript when upgrading bsp package
|
||
|
||
|
||
BSPFREEZE="" # freeze armbian packages (u-boot, kernel, dtb)
|
||
INSTALL_HEADERS="" # install kernel headers package
|
||
LIB_TAG="master" # change to "branchname" to use any branch currently available.
|
||
CARD_DEVICE="" # device name /dev/sdx of your SD card to burn directly to the card when done
|