armbian-build/config/boards

Internal build options

These options are used to declare variables used by the armbian build system to build a board-specific configuration.

If you are unsure about the documentation then invoke $ grep -r -A5 -B5 "BUILD_OPTION_HERE" /path/to/local/armbian/build/repository to get context to the option from the source code.

• BOARD_NAME ( company product version ): defines the board name used in welcome text, hostname and others relevant usage.The general convention is COMPANY PRODUCT VERSION - Often used as part of the scripting logic (namely for hacks) so follow the name declared in the board configuration.
  • Example: OLIMEX Teres A64
• BOARDFAMILY ( board-family ): defines the family of the board to apply board-specific configuration during build time such as adjustments for the temperature, LED behavior, etc..
  • Refer to sources table
  • Example: sun50iw1
• BOOTCONFIG ( u-boot identifier ): declares the name of the u-boot configuration for the build without the '_defconifig' suffix
  • Refer to the u-boot source tree to find configuration for the board
  • Example: teres-i
• BOOTSIZE ( int ): Declares the size of the boot partitin in Mib
  • Default: 256
  • Example: 256
• BOOT_LOGO ( string ): defines whether to use a eyecandy during bootloader phase
  • Values:
    • yes: Show the armbian boot logo
    • desktop: Show the armbian boot logo when BUILD_DESKTOP is set to yes
  • Default: not set
• IMAGE_PARTITION_TABLE ( string ): defines which disklabel type to use
  • Values:
    • msdos: Use dos/msdos disklabel
    • gpt: Use GPT disklabel
  • Default: msdos
• BOOTFS_TYPE ( filesystem ): defines the expected filesystem for the boot file system
  • Values:
    • none: Uses /boot on the root filesystem
    • ext4: Use the Fourth Extended Filesystem
    • ext2: Use the Second Extended Filesystem
    • fat: Use the File Allocation Table 32
  • Default: ext4
• DEFAULT_OVERLAYS ( space-separated list list of dtb overlays ): defines dtb overlays that are enabled by default. There is a basic dtb for each family but they have different level of used SoC features. Board X might have four USB ports but others might not. Therefore other does not need to have those enabled while board X does.
  • Examples:
    • usbhost0
    • usbhost2
    • usbhost3
    • cir
    • analog-codec
    • gpio-regulator-1.3v
    • uart1
• DEFAULT_CONSOLE ( string ): declares default console for the boot output
  • Values:
    • serial: Output boot messages to serial console
  • Default: not set
• MODULES ( space-separated list of kernel modules ): appends modules to the kernel command line for all kernel branches
• MODULES_LEGACY ( space-separated list of kernel modules ): appends modules to the kernel command line for legacy kernel
• MODULES_CURRENT ( space-separated list of kernel modules ): appends modules to the kernel command line for current kernel
• MODULES_EDGE ( space-separated list of kernel modules ): appends modules to the kernel command line for edge kernel
• MODULES_BLACKLIST ( space-separated list of kernel modules ): appends modules to the kernel's blacklist/deny list for all kernel branches
• MODULES_BLACKLIST_LEGACY ( space-separated list of kernel modules ): appends modules to the kernel's blacklist/deny list for legacy kernel
• MODULES_BLACKLIST_CURRENT ( space-separated list of kernel modules ): appends modules to the kernel's blacklist/deny list for current kernel
• MODULES_BLACKLIST_EDGE ( space-separated list of kernel modules ): appends modules to the kernel's blacklist/deny list for edge kernel
• SERIALCON ( comma-separated list of terminal interfaces [:bandwidth] ): declares which serial console should be used on the system
  • Example: ttyS0:15000000,ttyGS1
• HAS_VIDEO_OUTPUT ( boolean ): defines whether the system has video output such as eye candy, bootsplash, etc..
  • Values:
    • yes: Enable video-related configuration
    • no: Disable video-related configuration
• KERNEL_TARGET ( comma-separated list of kernel releases or branches ): declares which kernels should be used for the build
  • Values:
    • legacy: Use legacy kernel
    • current: Use current kernel
    • edge: Use edge kernel
    • [branch]: Use specified [branch] kernel
    • [none]: Exits with error
• FULL_DESKTOP ( boolean ): defines whether to install desktop stack of applications such as office, thunderbird, etc..
  • Values:
    • yes: install desktop stack
    • no: doesn't install desktop stack
• DESKTOP_AUTOLOGIN ( boolean ): Toggle desktop autologin
  • Values:
    • yes: Automatically login to the desktop
    • no: disable desktop autologin
  • Default: no
• PACKAGE_LIST_BOARD ( space-separated list of packages ): Declares which packages should be installed on the system
• PACKAGE_LIST_BOARD_REMOVE ( space-separated list of packages ): Declares packages to be removed from the system
• BOOT_FDT_FILE ( device tree configuration ): Force to load specific device tree configuration if different from the one defined by u-boot
  • Values:
    • [family]/[file.dtb]: Replace device tree with the one specified
    • none: Do not use device tree configuration
  • Example: rockchip/rk3568-rock-3-a.dtb
• CPUMIN ( minimum CPU frequency to scale in Hz ): Set minimal CPU frequency of the system
  • Default: Differs per family 480000 for sunxi8 boards
• CPUMAX ( minimum CPU frequency to scale in Hz ): Set maximal CPU frequency of the system
  • Default: Differs per family 1400000 for sunxi8 boards
• FORCE_BOOTSCRIPT_UPDATE ( boolean ): Force bootscript installation if they are not present
  • Values:
    • yes: Enable
    • no: Disable
• OVERLAY_PREFIX ( prefix ): Prefix for device tree and overlay file paths which will be set while creating an image
  • Example: sun8i-h3

Deprecated

• BOOTCONFIG_LEGACY ( u-boot identifier ): use BOOTCONFIG instead
• BOOTCONFIG_CURRENT ( u-boot identifier ): use BOOTCONFIG instead
• BOOTCONFIG_EDGE ( u-boot identifier ): use BOOTCONFIG instead
• PACKAGE_LIST_BOARD_DESKTOP ( space-separated list of packages ): use PACKAGE_LIST_BOARD instead
• PACKAGE_LIST_BOARD_DESKTOP_REMOVE ( space-separated list of packages ): use PACKAGE_LIST_BOARD instead

File extensions

Statuses displayed at the login prompt:

file type	description
.csc or .tvb	community creations or no active maintainer
.wip	work in progress
.eos	end of life