1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
36 lines
992 B
Diff
36 lines
992 B
Diff
From a741524891ac224a94817133c549adfc260ea3a4 Mon Sep 17 00:00:00 2001
|
|
From: Ondrej Jirman <megous@megous.com>
|
|
Date: Sun, 26 Feb 2017 16:08:34 +0100
|
|
Subject: [PATCH 40/87] ARM: sunxi: h3/h5: Add r_i2c pinmux node
|
|
|
|
H3/H5 SoCs contain an I2C controller optionally available
|
|
on the PL0 and PL1 pins. This patch adds pinmux configuration
|
|
for this controller.
|
|
|
|
Signed-off-by: Ondrej Jirman <megous@megous.com>
|
|
[Icenowy: change commit message, node name and function name]
|
|
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
|
|
---
|
|
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 5 +++++
|
|
1 file changed, 5 insertions(+)
|
|
|
|
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
index d38282b9e5d4..3a5f2aad7449 100644
|
|
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
@@ -639,6 +639,11 @@
|
|
pins = "PL11";
|
|
function = "s_cir_rx";
|
|
};
|
|
+
|
|
+ r_i2c_pins: r-i2c {
|
|
+ pins = "PL0", "PL1";
|
|
+ function = "s_i2c";
|
|
+ };
|
|
};
|
|
};
|
|
};
|
|
--
|
|
2.13.5
|
|
|