1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
56 lines
1.3 KiB
Diff
56 lines
1.3 KiB
Diff
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
index 1be1a02..7772d16 100644
|
|
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
@@ -77,6 +77,22 @@
|
|
};
|
|
};
|
|
|
|
+ sound_hdmi: sound {
|
|
+ compatible = "simple-audio-card";
|
|
+ simple-audio-card,format = "i2s";
|
|
+ simple-audio-card,name = "allwinner,hdmi";
|
|
+ simple-audio-card,mclk-fs = <256>;
|
|
+ status = "disabled";
|
|
+
|
|
+ simple-audio-card,codec {
|
|
+ sound-dai = <&hdmi>;
|
|
+ };
|
|
+
|
|
+ simple-audio-card,cpu {
|
|
+ sound-dai = <&i2s2>;
|
|
+ };
|
|
+ };
|
|
+
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
@@ -630,6 +646,19 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ i2s2: i2s@1c22800 {
|
|
+ #sound-dai-cells = <0>;
|
|
+ compatible = "allwinner,sun8i-h3-i2s";
|
|
+ reg = <0x01c22800 0x400>;
|
|
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
|
|
+ clock-names = "apb", "mod";
|
|
+ dmas = <&dma 27>;
|
|
+ resets = <&ccu RST_BUS_I2S2>;
|
|
+ dma-names = "tx";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
codec: codec@1c22c00 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun8i-h3-codec";
|
|
@@ -747,6 +776,7 @@
|
|
};
|
|
|
|
hdmi: hdmi@1ee0000 {
|
|
+ #sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun8i-h3-dw-hdmi",
|
|
"allwinner,sun8i-a83t-dw-hdmi";
|
|
reg = <0x01ee0000 0x10000>;
|