131 lines
5.4 KiB
Plaintext
131 lines
5.4 KiB
Plaintext
# Rockchip RK3588S octa core 4/8/16GB RAM SoC NVMe USB3 USB-C GbE
|
|
BOARD_NAME="Orange Pi 5"
|
|
BOARDFAMILY="rockchip-rk3588"
|
|
BOARD_MAINTAINER="efectn"
|
|
BOOTCONFIG="orangepi_5_defconfig" # vendor name, not standard, see hook below, set BOOT_SOC below to compensate
|
|
BOOTCONFIG_SATA="orangepi_5_sata_defconfig"
|
|
BOOT_SOC="rk3588"
|
|
KERNEL_TARGET="legacy,vendor,edge"
|
|
KERNEL_TEST_TARGET="vendor,edge"
|
|
FULL_DESKTOP="yes"
|
|
BOOT_LOGO="desktop"
|
|
BOOT_FDT_FILE="rockchip/rk3588s-orangepi-5.dtb"
|
|
BOOT_SCENARIO="spl-blobs"
|
|
BOOT_SUPPORT_SPI="yes"
|
|
BOOT_SPI_RKSPI_LOADER="yes"
|
|
IMAGE_PARTITION_TABLE="gpt"
|
|
DDR_BLOB='rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin'
|
|
BL31_BLOB='rk35/rk3588_bl31_v1.44.elf'
|
|
declare -g UEFI_EDK2_BOARD_ID="orangepi-5" # This _only_ used for uefi-edk2-rk3588 extension
|
|
|
|
declare -g BLUETOOTH_HCIATTACH_PARAMS="-s 115200 /dev/ttyS9 bcm43xx 1500000" # For the bluetooth-hciattach extension
|
|
enable_extension "bluetooth-hciattach" # Enable the bluetooth-hciattach extension
|
|
|
|
function post_family_tweaks_bsp__orangepi5_copy_usb2_service() {
|
|
if [[ $BRANCH == "edge" ]]; then
|
|
return
|
|
fi
|
|
|
|
display_alert "Installing BSP firmware and fixups"
|
|
|
|
# Add USB2 init service. Otherwise, USB2 and TYPE-C won't work by default
|
|
cp $SRC/packages/bsp/orangepi5/orangepi5-usb2-init.service $destination/lib/systemd/system/
|
|
|
|
return 0
|
|
}
|
|
|
|
function post_family_tweaks__orangepi5_enable_usb2_service() {
|
|
if [[ $BRANCH == "edge" ]]; then
|
|
return
|
|
fi
|
|
|
|
display_alert "$BOARD" "Installing board tweaks" "info"
|
|
|
|
# enable usb2 init service
|
|
chroot $SDCARD /bin/bash -c "systemctl --no-reload enable orangepi5-usb2-init.service >/dev/null 2>&1"
|
|
|
|
return 0
|
|
}
|
|
|
|
function post_family_tweaks__orangepi5_naming_audios() {
|
|
if [[ $BRANCH == "edge" ]]; then
|
|
return
|
|
fi
|
|
|
|
display_alert "$BOARD" "Renaming orangepi5 audios" "info"
|
|
|
|
mkdir -p $SDCARD/etc/udev/rules.d/
|
|
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
|
|
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-dp0-sound", ENV{SOUND_DESCRIPTION}="DP0 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
|
|
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-es8388-sound", ENV{SOUND_DESCRIPTION}="ES8388 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
|
|
|
|
return 0
|
|
}
|
|
|
|
function post_family_config_branch_legacy__orangepi5_uboot_add_sata_target() {
|
|
display_alert "$BOARD" "Configuring ($BOARD) standard and sata uboot target map" "info"
|
|
|
|
UBOOT_TARGET_MAP="
|
|
BL31=$RKBIN_DIR/$BL31_BLOB $BOOTCONFIG spl/u-boot-spl.bin u-boot.dtb u-boot.itb;;idbloader.img u-boot.itb rkspi_loader.img
|
|
BL31=$RKBIN_DIR/$BL31_BLOB $BOOTCONFIG_SATA spl/u-boot-spl.bin u-boot.dtb u-boot.itb;; rkspi_loader_sata.img
|
|
"
|
|
}
|
|
|
|
function post_family_config_branch_edge__uboot_config() {
|
|
display_alert "$BOARD" "u-boot ${BOOTBRANCH_BOARD} edge overrides" "info"
|
|
UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin u-boot.itb idbloader.img idbloader-spi.img"
|
|
unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
|
|
|
|
# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
|
|
function write_uboot_platform() {
|
|
dd if=${1}/u-boot-rockchip.bin of=${2} bs=32k seek=1 conv=fsync
|
|
}
|
|
|
|
# Smarter/faster/better to-spi writer using flashcp (hopefully with --partition), using the binman-provided 'u-boot-rockchip-spi.bin'
|
|
function write_uboot_platform_mtd() {
|
|
declare -a extra_opts_flashcp=("--verbose")
|
|
if flashcp -h | grep -q -e '--partition'; then
|
|
echo "Confirmed flashcp supports --partition -- read and write only changed blocks." >&2
|
|
extra_opts_flashcp+=("--partition")
|
|
else
|
|
echo "flashcp does not support --partition, will write full SPI flash blocks." >&2
|
|
fi
|
|
flashcp "${extra_opts_flashcp[@]}" "${1}/u-boot-rockchip-spi.bin" /dev/mtd0
|
|
}
|
|
}
|
|
|
|
function post_uboot_custom_postprocess__create_sata_spi_image() {
|
|
if [[ $BRANCH == "edge" ]]; then
|
|
return
|
|
fi
|
|
|
|
display_alert "$BOARD" "Create rkspi_loader_sata.img" "info"
|
|
|
|
dd if=/dev/zero of=rkspi_loader_sata.img bs=1M count=0 seek=16
|
|
/sbin/parted -s rkspi_loader_sata.img mklabel gpt
|
|
/sbin/parted -s rkspi_loader_sata.img unit s mkpart idbloader 64 7167
|
|
/sbin/parted -s rkspi_loader_sata.img unit s mkpart vnvm 7168 7679
|
|
/sbin/parted -s rkspi_loader_sata.img unit s mkpart reserved_space 7680 8063
|
|
/sbin/parted -s rkspi_loader_sata.img unit s mkpart reserved1 8064 8127
|
|
/sbin/parted -s rkspi_loader_sata.img unit s mkpart uboot_env 8128 8191
|
|
/sbin/parted -s rkspi_loader_sata.img unit s mkpart reserved2 8192 16383
|
|
/sbin/parted -s rkspi_loader_sata.img unit s mkpart uboot 16384 32734
|
|
dd if=idbloader.img of=rkspi_loader_sata.img seek=64 conv=notrunc
|
|
dd if=u-boot.itb of=rkspi_loader_sata.img seek=16384 conv=notrunc
|
|
}
|
|
|
|
# Override family config for this board; let's avoid conditionals in family config.
|
|
function post_family_config__orangepi5_use_vendor_uboot() {
|
|
if [[ $BRANCH == "edge" ]]; then
|
|
BOOTCONFIG="orangepi-5-rk3588s_defconfig"
|
|
BOOTSOURCE="https://github.com/u-boot/u-boot.git"
|
|
BOOTBRANCH="commit:2f0282922b2c458eea7f85c500a948a587437b63"
|
|
BOOTDIR="u-boot-${BOARD}"
|
|
BOOTPATCHDIR="v2024.01/board_${BOARD}"
|
|
else
|
|
BOOTSOURCE='https://github.com/orangepi-xunlong/u-boot-orangepi.git'
|
|
BOOTBRANCH='branch:v2017.09-rk3588'
|
|
BOOTPATCHDIR="legacy/u-boot-orangepi5-rk3588"
|
|
fi
|
|
}
|