* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
12 lines
495 B
Plaintext
12 lines
495 B
Plaintext
--- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
|
|
+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
|
|
@@ -128,7 +128,7 @@
|
|
if (drvr->bus_if->wowl_supported)
|
|
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
|
|
if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
|
|
- brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
|
|
+ /*brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);*/
|
|
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p");
|
|
|
|
/* set chip related quirks */
|